ORDER OF THE MINISTER OF TRADE AND INTEGRATION OF THE REPUBLIC OF KAZAKHSTAN

of December 19, 2023 No. 441-HK

About introduction of amendments to some orders

I ORDER:

1. Approve the enclosed list of some orders to which changes are made.

2. To provide to committee of technical regulation and metrology of the Ministry of Trade and integration of the Republic of Kazakhstan in the procedure established by the legislation:

1) state registration of this order in the Ministry of Justice of the Republic of Kazakhstan;

2) placement of this order on Internet resource of the Ministry of Trade and integration of the Republic of Kazakhstan.

3. To impose control of execution of this order on the supervising vice-Minister of Trade and integration of the Republic of Kazakhstan.

4. This order becomes effective after ten calendar days after day of its first official publication.

Approved by the Order of the Minister of Trade and integration of the Republic of Kazakhstan of December 19, 2023 , No. 441-HK

The list of some orders to which changes are made

1. Bring in the order of the Minister of investments and development of the Republic of Kazakhstan of December 26, 2018 No. 923 "About approval of Rules of development, approval, registration in the register of state system for ensuring the uniformity of measurements and application of techniques of checking of measuring instruments" (it is registered in the Register of state registration of regulatory legal acts at No. 18059) the following change:

state preamble in the following edition:

"According to the subitem 15) of article 6-2 of the Law of the Republic of Kazakhstan "About ensuring unity of measurements" I ORDER:";

in Rules of development, approval and registration in the register of state system for ensuring the uniformity of measurements and application of techniques of checking of the measuring instruments approved by the specified order:

state Item 2 in the following edition:

"2. In Rules the following main terms and determinations are applied:

1) approbation of technique of checking of measuring instruments – experimental confirmation of suitability of technique of checking for determination and confirmation of conformity of measuring instrument to the established technical and metrological requirements;

2) technique of checking of measuring instruments – the description of set of transactions which accomplishment allows to determine and confirm compliance of measuring instruments to the established requirements to metrological characteristics;

3) the register of state system for ensuring the uniformity of measurements (further – the register of GSI of RK) – the electronic database of objects, participants of works and documents in the field of ensuring unity of measurements.";

state item 4 in the following edition:

"4. The techniques of checking of measuring instruments applied in case of measurements to which metrological requirements in lists of the measurements relating to state regulation and regulatory legal acts are established are subject to registration and placement in the register of GSI of RK.".

2. Bring in the order of the Minister of investments and development of the Republic of Kazakhstan of December 27, 2018 No. 929 "About approval of Rules of maintaining the register of state system for ensuring the uniformity of measurements" (it is registered in the Register of state registration of regulatory legal acts at No. 18079) the following changes:

state preamble in the following edition:

"According to the subitem 17) of article 6-2 of the Law of the Republic of Kazakhstan "About ensuring unity of measurements" I ORDER:";

in the Rules of maintaining the register of state system for ensuring the uniformity of measurements approved by the order:

to state subsection 1.3 of item 4 in the following edition:

"Subsection 1.3. Standards of units of sizes of the organization (KZ.01.03.XXXXX-XXXX).";

appendix to Rules of maintaining the register of state system for ensuring the uniformity of measurements to be reworded as follows according to appendix 1 to this list.

3. Bring in the order of the Minister of investments and development of the Republic of Kazakhstan of December 27, 2018 No. 931 "About approval of Rules of approval of type, testing for the purposes of approval of type, metrological certification of measuring instruments and rendering the state services "Issue of the Certificate on Approval Like Measuring Instruments" and "Issue of the Certificate on Metrological Certification of Measuring Instruments", form of the certificate on approval like measuring instruments and establishment of form of sign of approval of type" (it is registered in the Register of state registration of regulatory legal acts at No. 18110) the following changes:

state preamble in the following edition:

"According to subitems 11) and 21) of article 6-2 of the Law of the Republic of Kazakhstan "About ensuring unity of measurements" I ORDER:";

state Item 2 in the following edition:

"2. To provide to committee of technical regulation and metrology of the Ministry of Trade and integration of the Republic of Kazakhstan in the procedure established by the legislation:

1) state registration of this order in the Ministry of Justice of the Republic of Kazakhstan;

2) placement of this order on Internet resource of the Ministry of Trade and integration of the Republic of Kazakhstan;

3) the direction of information on the made changes and (or) additions in Single contact center, to the operator of information and communication infrastructure of "the electronic government", within three working days from the date of state registration.";

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info