of May 13, 2014 No. 73
About modification of the Decision of the Commission of the Customs union of October 18, 2011 No. 825
According to article 3 of the Agreement on the Eurasian economic commission of November 18, 2011 the Board of the Eurasian economic commission solved:
1. Bring in the Decision of the Commission of the Customs union of October 18, 2011 No. 825 "About adoption of the technical regulation of the Customs union "About safety of the equipment for work in explosive environments" changes according to appendix.
2. This Decision becomes effective after 30 calendar days from the date of its official publication.
Chairman of Board of the Eurasian economic commission
V. Khristenko
to the Decision of Board of the Eurasian economic commission of May 13, 2014 No. 73
1. The list of standards as a result of which application on voluntary basis observance of requirements of the technical regulation of the Customs union "About safety of the equipment for work in explosive environments" is provided (TR CU 012/2011) approved by the specified Decision to state in the following edition:
"No. 825 is approved by the Decision of the Commission of the Customs union of October 18, 2011
(in edition of the Decision of Board of the Eurasian economic commission of May 13, 2014 No. 73)
The list of standards as a result of which application on voluntary basis observance of requirements of the technical regulation of the Customs union "About safety of the equipment for work in explosive environments" (is provided to TR CU 012/2011)
|
№ payment order |
Elements of the technical regulation of the Customs union |
Designation of the standard |
Name of the standard |
Note |
|
|
1 |
2 |
3 |
4 |
5 |
|
|
1 |
Items 1, 2 and 5 Article 4 |
GOST 22782.3-77 |
Electric equipment explosion-proof with special type of explosion protection. Technical requirements and test methods |
|
|
|
2 |
GOST 30852.0-2002 (MACK 60079-0:1998) |
Electric equipment explosion-proof. Part 0. General requirements |
|
| |
|
3 |
GOST 30852.1-2002 (MACK 60079-1:1998) |
Electric equipment explosion-proof. Part 1. Explosion protection of type "blast-tight cover" |
|
| |
|
4 |
GOST 30852.3-2002 |
Electric equipment explosion-proof. Part 2. Filling or purge of cover under the excessive pressure of p |
|
| |
|
5 |
GOST 30852.6-2002 (MACK 60079-5:1997) |
Electric equipment explosion-proof. Part 5. Quartz filling of cover of q |
|
| |
|
6 |
GOST 30852.7-2002 (MACK 60079-6:1995) |
Electric equipment explosion-proof. Part 6. Oil filling of cover of o |
|
| |
|
7 |
GOST 30852.8-2002 |
Electric equipment explosion-proof. Part 7. Protection of type of e |
|
| |
|
8 |
GOST 30852.9-2002 (MACK 60079-10:1995) |
Electric equipment explosion-proof. Part 10. Classification of explosive zones |
|
| |
|
9 |
GOST 30852.10-2002 (MACK 60079-11:1999) |
Electric equipment explosion-proof. Part 11. Intrinsically safe electric chain of i |
|
| |
|
10 |
GOST 30852.11-2002 (MACK 60079-12:1978) |
Electric equipment explosion-proof. Part 12. Classification of mixes of gases and vapors with air on safe experimental maximum gaps and the minimum igniting currents |
|
| |
|
11 |
GOST 30852.12-2002 (MACK 60079-13:1982) |
Electric equipment explosion-proof. Part 13. Designing and operation of the rooms protected by excessive pressure |
|
| |
|
12 |
GOST 30852.13-2002 (MACK 60079-14:1996) |
Electric equipment explosion-proof. Part 14. Electroinstallations in explosive zones (except underground developments) |
|
| |
|
13 |
GOST 30852.14-2002 |
Electric equipment explosion-proof. Part 15. Protection of type of n |
|
| |
|
14 |
GOST 30852.15-2002 (MACK 60079-16:1990) |
Electric equipment explosion-proof. Part 16. Forced ventilation for protection of rooms in which establish analyzers |
|
| |
|
15 |
GOST 30852.16-2002 (MACK 60079-17:1996) |
Electric equipment explosion-proof. Part 17. Check and maintenance of electroinstallations in explosive zones (except underground developments) |
|
| |
|
16 |
GOST 30852.17-2002 (MACK 60079-18:1992) |
Electric equipment explosion-proof. Part 18. Explosion protection of type "sealing by compound (m)" |
|
| |
|
17 |
GOST 30852.18-2002 (MACK 60079-19:1993) |
Electric equipment explosion-proof. Part 19. Repair and check of electric equipment used in explosive gas environments (except the underground developments or applications connected with conversion and production of explosives) |
|
| |
|
18 |
GOST 30852.19-2002 (MACK 60079-20:1996) |
Electric equipment explosion-proof. Part 20. The data on combustible gases and vapors relating to operation of electric equipment |
|
| |
|
19 |
GOST 30852.20-2002 |
Electric equipment miner. Isolation, ways of leakage and electric gaps. Technical requirements and test methods |
|
| |
|
20 |
GOST 31438.1-2011 (EN 1127-1:2007) |
Explosive environments. Explosion protection and prevention of explosion. Part 1. Fundamental concept and methodology |
|
| |
|
21 |
GOST 31438.2-2011 (EN 1127-2:2002) |
Explosive environments. Explosion protection and prevention of explosion. Part 2. The fundamental concept and methodology (for underground developments) |
|
| |
|
22 |
GOST 31439-2011 (EN 1710:2005) |
The equipment and components intended for application in potentially explosive environments of underground developments of mines and mines |
|
| |
|
23 |
GOST 31440.1-2011 (EN 1834-1:2000) |
Internal combustion engines piston. Safety requirements to the engines intended for application in potentially explosive environments. Part 1. Group II engines for application in the circles containing combustible gas and vapor |
|
| |
|
24 |
GOST 31440.2-2011 (EN 1834-2:2000) |
Internal combustion engines piston. Safety requirements to the engines intended for application in potentially explosive environments. Part 2. Group I engines for application in the underground developments dangerous on ignition of firedamp and/or combustible dust |
|
| |
|
25 |
GOST 31440.3-2011 (EN 1834-3:2000) |
Internal combustion engines piston. Safety requirements to the engines intended for application in potentially explosive environments. Part 3. Group III engines for application in the circles containing combustible dust |
|
| |
|
26 |
GOST 31441.1-2011 (EN 13463-1:2001) |
The equipment is not electric, intended for application in potentially explosive environments. Part 1. General requirements |
|
| |
|
27 |
GOST 31441.2-2011 (EN 13463-2:2004) |
The equipment is not electric, intended for application in potentially explosive environments. Part 2. Protection by cover with the limited omission of fr gases |
|
| |
|
28 |
GOST 31441.3-2011 (EN 13463-3:2005) |
The equipment is not electric, intended for application in potentially explosive environments. Part 3. Protection by blast-tight cover of "d" |
|
| |
|
29 |
GOST 31441.5-2011 (EN 13463-5:2003) |
The equipment is not electric, intended for application in potentially explosive environments. Part 5. Protection by constructional safety "with" |
|
| |
|
30 |
GOST 31441.6-2011 (EN 13463-6:2005) |
The equipment is not electric, intended for application in potentially explosive environments. Part 6. Protection by control of source of ignition "b" |
|
| |
|
31 |
GOST 31441.8-2011 (EN 13463-8:2003) |
The equipment is not electric, intended for application in potentially explosive environments. Part 8. Protection by liquid immersion of "k" |
|
| |
|
32 |
GOST 31442-2011 (EN 50303:2000) |
Equipment groups I, the level of explosion protection of Ma, for application in the circle dangerous on ignition of firedamp and/or coal dust |
|
| |
|
33 |
GOST 31610.0-2012 (IEC 60079-0:2004) |
Electric equipment for explosive gas environments. Part 0. General requirements |
is effective till 01.01.2019 |
| |
|
34 |
GOST 31610.5-2012/IEC 60079-5:2007 |
Electric equipment for explosive gas environments. Part 5. Quartz filling of cover of "q" |
is effective till 01.01.2019 |
| |
|
35 |
GOST 31610.6-2012/IEC 60079-6:2007 |
Electric equipment for explosive gas environments. Part 6. Oil filling of cover "about" |
is effective till 01.01.2019 |
| |
|
36 |
GOST 31610.7-2012/IEC 60079-7:2006 |
Electric equipment for explosive gas environments. Part 7. The increased protection of type "е" |
is effective till 01.01.2019 |
| |
|
37 |
GOST 31610.10-2012/IEC 60079-10:2002 |
Electric equipment for explosive gas environments. Part 10. Classification of explosive zones |
is effective till 01.01.2019 |
| |
|
38 |
GOST 31610.11-2012/IEC 60079-11:2006 |
Electric equipment for explosive gas environments. Part 11. Intrinsically safe electric chain of "i" |
is effective till 01.01.2019 |
| |
|
39 |
GOST 31610.15-2012/MACK 60079-15:2005 |
Electric equipment for explosive gas environments. Part 15. Design, testing and marking of electric equipment with type of protection of "n" |
is effective till 01.01.2019 |
|
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Search in text CTRL-F
If you are guest on our site, you will work in Demo mode. In Demo mode you can see only first page of each document.
With full access you can
Database include more 65000 documents. You can find needed documents using search system.
For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions.
This section provides answers to questions set by users.