"28.92.21.110

Bulldozers on catarpillars

availability at the subject of activities in the field of the industry - the tax resident of state members of the Eurasian Economic Union of the rights to design and technological documentation on products (bulldozers on catarpillars) with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of the research and development works performed by the subject of activities in the field of the industry for the public contract;

availability at the subject of activities in the field of the industry in the territory of one of state members of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of the corresponding products;

accomplishment of one of conditions <18> in case of production of the corresponding products in case of use of components for the purpose of confirmation of their production in the territory of the Russian Federation;

implementation in the territory of the Russian Federation the following transactions (conditions) (in case of non-use of component points for it are not charged and are not considered when calculating the greatest possible number of points, in the absence of technological transaction in the production technology of component of the requirement to its accomplishment are not shown, points are not charged and are not considered when calculating the greatest possible number of points):

the bearing frame, the bearing frame designs:

use of the Russian metal rolling for production of the bearing frame (4 points);

casting, forging, stamping (4 points), cutting, it is flexible, welding (4 points) of procurements, details of the bearing frame;

machining, welding, drawing protective coatings of the bearing frame (14 points);

casting, cutting, it is flexible, machining, welding, drawing protective coatings of the bearing frame design of bulldozer dump (8 points);

casting, cutting, it is flexible, machining, welding, drawing protective coatings of the bearing frame design of the ripper (5 points);

working equipment:

use of the Russian metal rolling for production of bulldozer dump (2 points);

casting, cutting, it is flexible, machining, welding, staff-wood, drawing protective coatings of bulldozer dump (6 points);

casting, forging, stamping, machining, heat treatment, drawing protective coatings of tooth of the ripper (3 points);

power plant:

production of the internal combustion engine (52 points);

production of the traction store of the electric power (10 points), starter store of energy (2 points);

production of the managed power electric converter for the generator (10 points);

production of the power generator (10 points);

production of the heat exchanger (radiator, the intercooler) for engine cooling system (3 points);

stamping, cutting, is flexible, formation, machining, pasting, welding of the air duct, air inlet of system of air supply in the engine (1 point);

cutting, it is flexible, machining, welding of reception pipe, the resonator, muffler of system of release of the fulfilled gases (1 point);

main hydraulic system:

production of hydraulic pump of steering (2 points);

production of hydraulic pumps of the main hydraulic system (9 points);

production of hydraulic valves (9 points);

cutting, it is flexible, welding, machining, carrying out monitoring bench tests of hydraulic tank (2 points);

production steering pump doser (2 points);

production of hydraulic cylinders of bulldozer dump (3 points);

production of hydraulic cylinders of the ripper (3 points);

cabin:

casting, stamping, cutting, it is flexible procurements, cabin framework details (4 points);

machining, welding, drawing protective coatings of framework of cabin (10 points);

cutting, it is flexible, stamping, formation, welding, machining, drawing protective coatings of elements of interior, cabin exterior - facing panels (1 point), floor, the platform of entrance to cabin (2 points), ceiling, roof (1 point);

production of seat of the operator (2 points);

production of the panel, panel, touch display (2 points), joystick of control of machine, executive mechanisms (2 points);

production of the central electronic control unit by machine (6 points);

production of the conditioner (4 points);

production of glasses (2 points);

production of devices of lighting, light alarm system (2 points);

tradable system:

cutting, it is flexible, welding, machining, heat treatment, drawing protective coatings of frame of caterpillar tradable system (12 points);

forging, stamping, cutting, is flexible, machining, heat treatment of details (boot (plate), link, semi-link, the plug, finger), assembly of caterpillar (22 points);

casting, forging, stamping, machining, heat treatment of driving wheel (the leading gear wheel), the directing (tension) wheel (5 points);

casting, forging, stamping, machining, heat treatment of details of basic skating rinks (roller, axis, cover), assembly, testing of basic skating rinks (10 points);

casting, forging, stamping, machining, heat treatment of details of the supporting skating rinks (roller, axis, cover), assembly of the supporting skating rinks (5 points);

production of the mechanism of tension-sdavaniya (2 points);

transmission elements:

cutting, stamping, staff-wood, machining of details of clutch coupling (the basket case, fork, the conducted disk, nave of the conducted disk) (4 points);

molding, agglomeration, heat treatment, machining of frictional overlays of clutch coupling (1 point);

production of cardan transfers (6 points);

production of electronic control unit transmission (6 points);

assembly, carrying out monitoring bench tests of the transmission (1 point), monoblock node of the transmission with the main transfer, differential (1 point), capacity selection reducer (1 point), onboard reducer (1 point);