"28.30.2

Tractors for agricultural industry others

availability at the subject of activities in the field of the industry - the tax resident of state members of the Eurasian Economic Union of the rights to design and technological documentation on products (tractors for agricultural industry other) with possibility of entering into design and technological documentation of changes or use of the design documentation developed as a result of accomplishment of the research and development works performed by the subject of activities in the field of the industry for the public contract;

availability at the subject of activities in the field of the industry in the territory of one of state members of the Eurasian Economic Union of the service center, authorized to perform repair, after-sale and guarantee maintenance of the corresponding products;

in case of production of the corresponding products in case of use of components for the purpose of confirmation of their production one of conditions in the territory of the Russian Federation shall be carried out <18>;

implementation in the territory of the Russian Federation the following transactions (conditions) (in case of non-use of component points for it are not charged and are not considered when calculating the greatest possible number of points, in the absence of technological transaction in the production technology of component of the requirement for its accomplishment are not shown, points are not charged and are not considered when calculating the greatest possible number of points):

the bearing frame:

casting, forging, stamping, cutting, it is flexible, welding of procurements (5 points);

machining, welding, staff-wood, drawing protective coatings (5 points);

power plant:

production of the internal combustion engine (30 points);

production of the power generator (10 points);

production of the motor-generator (26 points);

production of the traction store of the electric power (10 points);

production of the power electric converter (22 points);

production of the heat exchanger (radiator, the intercooler) for engine cooling system (6 points);

stamping, cutting, is flexible, formation, machining, pasting, welding of the air duct, air inlet of system of air supply in the engine (2 points);

cutting, it is flexible, machining, welding of reception pipe, the resonator, muffler of system of release of the fulfilled gases (2 points);

production of the accumulator (4 points);

hydraulic system:

production of hydraulic pumps:

steering (3 points);

hydraulic system (12 points);

production of the hydraulic valve (8 points);

cutting, it is flexible, welding, machining, formation, drawing protective coatings, carrying out monitoring bench tests of hydraulic tank (2 points);

production steering pump doser (3 points);

production of filters of hydraulic system (2 points);

production of hydraulic cylinders:

steering, folding of frame (2 points);

hinge plate mechanism (5 points);

tension of caterpillar tradable system (2 points);

cabin:

cutting, it is flexible procurements of framework (2 points);

machining, welding, drawing protective coatings of framework (4 points);

production of seat of the operator (2 points);

production of steering column (2 points);

production of the conditioner (6 points);

production of glasses (2 points);

production of devices of lighting, light alarm system (2 points);

production of rear-view mirrors (2 points);

cutting, it is flexible, stamping, formation, machining, welding, drawing protective coatings of elements of interior, exterior:

facing panels (1 point);

floor, platform of entrance to cabin (2 points);

ceiling, roof (1 point);

tradable system:

production of tires (4 points);

production of rims (2 points);

casting, forging, stamping, cutting, it is flexible, welding, machining, heat treatment, drawing protective coatings:

suspension bracket details (brackets, levers, stabilizers, elastic elements) (3 points);

suspension bracket shock-absorbers (3 points);

casting, forging, cutting, it is flexible, welding, machining, heat treatment, drawing protective coatings:

beams of not leading bridge (3 points);

levers, drafts of steering (2 points);

cutting, it is flexible, welding, machining, heat treatment, drawing protective coatings of frame of caterpillar tradable system (4 points);

casting, forging, stamping, machining, heat treatment of driving wheel (the leading gear wheel), the directing (tension) wheel (2 points);

casting, forging, stamping, machining, heat treatment of details of the basic, supporting skating rinks (roller, axis, cover), assembly of the basic, supporting skating rinks (2 points);

production of caterpillar:

metal (4 points);

rezinoarmirovanny (8 points);

transmission elements:

transmission:

case (case):

procurement casting (2 points);

machining, heat treatment (3 points);

cogwheels:

casting, forging, stamping of procurements (3 points);

machining, heat treatment (6 points);

shaft:

forging, stamping of procurements (2 points);

machining, heat treatment (4 points);

gear couplings (synchronizers), drums of frictional couplings:

casting, forging, stamping, machining, heat treatment (2 points);

frictional disks:

stamping, molding, agglomeration, heat treatment, machining (2 points);

controling mechanism gear shifting:

casting, forging, stamping, machining, heat treatment (3 points);

transfer case, hodoumenshitel:

case (case):

procurement casting (2 points);

machining, heat treatment (2 points);

cogwheels, shaft:

casting, forging, stamping of procurements (1 point);

machining, heat treatment (3 points);

assembly, carrying out monitoring bench tests:

transmissions (1 point);

transfer case, hodoumenshitel (1 point);

front leading bridge:

casting, cutting, welding, machining of cases of beam of the bridge, cases of final transfer, brake drums, covers, naves (5 points);

forging, stamping, machining, heat treatment of cogwheels of final transfer, half shafts (4 points);

forging, stamping, machining, heat treatment of cogwheels of the main transfer (4 points);

forging, stamping, machining, heat treatment of cogwheels of differential (2 points);

assembly, carrying out monitoring bench tests (3 points);

back leading bridge:

casting, cutting, welding, machining of cases of beam of the bridge, cases of final transfer, brake drums, covers, naves (5 points);

forging, stamping, machining, heat treatment of cogwheels of final transfer, half shafts (4 points);

forging, stamping, machining, heat treatment of cogwheels of the main transfer (4 points);

forging, stamping, machining, heat treatment of cogwheels of differential (2 points);

assembly, carrying out monitoring bench tests (3 points);

production of the hydraulic motor for hydrovolume (hydrostatic), gidroobjemno-mechanical transmission (10 points);

production of hydraulic pump for hydrovolume (hydrostatic), gidroobjemno-mechanical transmission (10 points);

production of onboard (wheel) reducer for hydrovolume (hydrostatic), gidroobjemno-mechanical transmission (20 points);

production of the hydrotransformer for hydromechanical transmission (10 points);

production of the leading bridge with the integrated electric motor for electromechanical transmission (32 points);

production of electric motor for electromechanical transmission (20 points);

production electric motor wheel for electromechanical transmission (32 points);

production of cardan transfers (6 points);

production of rolling bearings:

transmissions (1 point);

transfer case (1 point);

hodoumenshitel (1 point);

front leading bridge (1 point);

back leading bridge (1 point);

onboard (wheel) reducer for hydrovolume (hydrostatic), gidroobjemno-mechanical transmission (1 point);

tradable system (1 point);

elements of exterior, safety:

stamping, cutting, is flexible, welding, formation, bonding, machining, drawing protective coatings of cowls, facing panels (5 points);

stamping, cutting, is flexible, welding, formation, machining, drawing protective coatings of wings, protective guards (2 points);

stamping, cutting, is flexible, welding, machining, drawing protective coatings of ladders, brackets (1 point);

traction coupling device:

hook, draft, emphasis, capture, trailing bar, pivot axle, fork, cross-piece, coupler:

casting, forging, stamping of procurements (1 point);

cutting, it is flexible, machining, welding, drawing protective coatings (2 points);

fuel tank:

production of fuel tank (4 points);

ballast loads:

casting, cutting, machining, drawing protective coatings (1 point);