Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

DECISION OF COUNCIL OF THE EURASIAN ECONOMIC COMMISSION

of October 18, 2016 №97

About approval of the Approval procedure like standard sample

Moscow

For the purpose of implementation of the subitem 3 of Item 9 of Protocol on carrying out coordinated policy in the field of ensuring unity of measurements (appendix №10 to the Agreement on the Eurasian Economic Union of May 29, 2014) and according to Item 38 of appendix №1 to the Regulations of work of the Eurasian economic commission approved by the Decision of the Supreme Eurasian economic council of December 23, 2014 №98, Council of the Eurasian economic commission decided:

1. Approve the enclosed Approval procedure like standard sample.

2. Determine that the documents on approval like standard sample issued according to the legislation of state member of the Eurasian Economic Union before date of the introduction of this Decision in force concerning the standard samples made in state members of the Eurasian Economic Union are effective before date of the termination of term of their action.

3. This Decision becomes effective from the effective date the rules of mutual recognition of results of works on ensuring unity of measurements approved by the Eurasian economic commission, but not earlier than 30 calendar days from the date of official publication of this Decision.

Members of council of the Eurasian economic commission:

From the Republic of Armenia

 

V. Gabriyelyan

From the Republic of Belarus 

V. Matyushevsky 

From the Republic of Kazakhstan 

A. Mamin 

From the Kyrgyz Republic 

O. Pankratov 

From the Russian Federation 

I. Shuvalov

Aproved by the Decision of Council of the Eurasian economic commission of October 18, 2016 №97

Approval procedure like standard sample

1. This Procedure is developed according to thesubitem 3 of Item 9 of the Protocol on carrying out coordinated policy in the field of ensuring unity of measurements (appendix № 10 to the Agreement on the Eurasian Economic Union of May 29, 2014), determines rules of approval like standard sample and extends to the standard samples made in the territories of state members of the Eurasian Economic Union (further respectively – approval of type, state members).

2. For the purposes of this Procedure primary reference technique (method) of measurements is understood as technique (method) of measurements which is implemented with the highest accuracy in state member at the single legal entity on 1 set of the equipment, is applied to assessment of correctness of results of the measurements received with use of other techniques (methods) of measurements of the same sizes including reference, allows to receive results of measurements without their metrological traceability to units of sizes of the same sort and is approved as primary reference technique (method) applied in state member.

Other concepts used in this Procedure are applied in the values determined by the Protocol on carrying out coordinated policy in the field of ensuring unity of measurements (appendix №10 to the Agreement on the Eurasian Economic Union of May 29, 2014).

3. The standard samples applied in the field of state regulation of ensuring unity of measurements (legislative metrology) are subject to approval of type without fail.

Concerning the standard samples applied out of the sphere of state regulation of ensuring unity of measurements (legislative metrology), approval of type is carried out in voluntary procedure.

4. Approval of type is carried out by public authority in the field of ensuring unity of measurements, the representative (notified) on implementation of these activities according to the legislation of state member (further – authorized body), based on positive results of testing (testing for the purpose of approval of type, certification, certification) standard sample.

Positive results of testing are understood as results of the testing (testing for the purpose of approval of type, certification, certification) standard sample which are carried out for the purpose of confirmation of conformity of metrological and technical characteristics (parameters) of standard sample determined as a result of testing (testing for the purpose of approval of type, certification, certification), to the requirements specified in the specification on development of standard sample (further – the specification) (specifications).

Testing (testing for the purpose of approval of type, certification, certification) standard sample are carried out according to the legislation of state member in the field of ensuring unity of measurements.

5. Approval of type is carried out according to the statement of any state member registered according to the legislation in its territory of the legal entity or physical person as the individual entrepreneur, being manufacturers and (or) developers of standard sample (further – the applicant).

6. During testing (testing for the purpose of approval of type, certification, certification) standard sample in case of determination of metrological and technical characteristics (parameters) of standard sample standards of units of sizes, measuring instruments and standard samples of the approved type, techniques (methods) of measurements for which metrological traceability of the results of measurements received with their help to the International System of Units (SI), national (primary) standards and (or) international standards of units of sizes or to primary reference techniques (methods) of measurements is provided are used.

Metrological and technical characteristics (parameters) of standard sample are expressed in terms of sizes or conventional units of the sizes estimated on conditional scales of sizes (scales of measurements), the name and which designation correspond to the International System of Units (SI) and (or) the list of stand-alone units of the sizes applied in case of development of technical regulations of the Eurasian Economic Union, including their ratios with the International System of Units (SI), approved by the Decision of Board of the Eurasian economic commission of April 21, 2015 №34.

Specifying of metrological and technical characteristics (parameters) of standard samples in the international units attributed to sizes by the World Health Organization is allowed.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.