Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

The document ceased to be valid since  July 3, 2020 according to Item 1 of the Order of the Ministry of development of economy, trade and agricultural industry of Ukraine of  November 18, 2019 No. 402

Registered by

Ministry of Justice of Ukraine

September 16, 2016

No. 1257/29387

ORDER OF THE MINISTRY OF ECONOMIC DEVELOPMENT AND TRADE OF UKRAINE

of August 29, 2016 No. 1413

About approval of the Procedure for certification of auditors for metrology

According to part five of article 18 of the Law of Ukraine "About metrology and metrological activities" PRIKAZYVAYU:

1. Approve the Procedure for certification of auditors for metrology which is applied.

2. Declare invalid the order of the State committee of Ukraine concerning technical regulation and consumer policy of July 27, 2007 No. 166 "About approval of the Procedure for certification of auditors for metrology", registered in the Ministry of Justice of Ukraine on September 28, 2007 for No. 1125/14392.

3. In accordance with the established procedure to submit to department of technical regulation this order on state registration to the Ministry of Justice of Ukraine.

4. This order becomes effective from the date of its official publication.

5. To impose control over the implementation of this order on the deputy minister of economic development and trade of Ukraine according to distribution of functional obligations.

First vice-Prime Minister of Ukraine Minister of Economic Development and Trade of Ukraine

S.I.Kubov

Approved by the Order of the Ministry of Economic Development and Trade of Ukraine of August 29, 2016, No. 1413

Procedure for certification of auditors for metrology

I. General provisions

1. This Procedure determines requirements to candidates for auditors by metrology, procedures of certification of candidates for auditors for metrology, auditors on metrology and considerations of documents of rather improper execution of obligations by the auditor on metrology.

2. The purpose of certification is determination of the professional training level of candidates for auditors on metrology and auditors on metrology for performance of works with power on carrying out checking of legislatively regulated means of the measuring equipment which are in operation (further - works on authorization).

3. In this Procedure terms are used in such values:

certification of the auditor for metrology - the procedure during which competence of the auditor on metrology for performance of works on authorization proves to be true;

certification of the candidate for auditors for metrology - the procedure during which are determined competence, appropriate level of qualification and knowledge of the legislation of Ukraine in the sphere of metrology and metrological activities of the candidate for auditors for metrology for performance of works by authorization;

the auditor for metrology - person who has corresponding qualification theoretical and practical preparation for performance of works on authorization and is certified according to this Procedure;

the candidate for auditors on metrology - person who applies to be certified as the auditor for metrology.

Other terms are used in the values given in the Law of Ukraine "About metrology and metrological activities".

4. Requirements to candidates for auditors on metrology (further - requirements) are established according to appendix 1 to this Procedure.

5. The request for certification (further - the request) (appendix 2) moves in the Ministry of Economic Development the candidate for auditors on metrology which candidate is presented by the company, organization or the organization or the auditor on metrology at own will.

The following documents are attached to the request:

the copy of the diploma about the higher education;

information card of the candidate for auditors on the metrology/auditor on metrology on performance of works on authorization on carrying out checking of legislatively regulated means of the measuring equipment which are in operation (further - the information card), in form according to appendix 3 to this Procedure;

copy of the document on advanced training;

the copy of the document confirming foreign language skills (in case of availability);

photo of 3 x 4 cm in size.

6. Certification of candidates for auditors for metrology and auditors on metrology is performed by the Ministry of Economic Development.

7. The Ministry of Economic Development within 15 working days from the date of the receipt of the request and documents attached to it considers the request and checks the submitted documents. In case of representation of incomplete document package (its discrepancy to the list according to Item 5 of this Section) or the false or incomplete information containing in the documents submitted together with the request, the Ministry of Economic Development leaves them without consideration what in writing notifies the candidate for auditors on the metrology/auditor on metrology with indication of the basis of leaving of the request without consideration on and returns document package.

II. Procedure for education of certifying commission and its power

1. For carrying out certification of candidates for auditors for metrology and auditors on metrology of the Ministry of Economic Development the commission on certification of candidates for auditors on metrology and auditors on metrology is formed (further - certifying commission).

The certifying commission is permanent advisory advisory body of the Ministry of Economic Development.

2. The certifying commission in the activities is guided by the Constitution and the laws of Ukraine, acts of the President of Ukraine and the Cabinet of Ministers of Ukraine, other regulatory legal acts, and also this Procedure.

3. The main objectives of certifying commission are:

determination of the professional training level of candidates for auditors on metrology and auditors on metrology for performance of works on authorization and provision of recommendations about certification of candidates for auditors for metrology and auditors on metrology or refusal in certification;

consideration of documents of rather improper execution of obligations by the auditor on metrology.

4. Certifying commission according to the tasks assigned to it:

performs consideration of the documents submitted by candidates for auditors on metrology and auditors on metrology;

performs competence of the candidate for auditors on metrology and the auditor on metrology by testing and interview;

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.