Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

ORDER OF THE GOVERNMENT OF THE REPUBLIC OF MOLDOVA

of April 8, 2014 No. 267

About approval of the Technical regulation about non-automatic weight measuring devices

(as amended on 06-07-2022)

Based on the Law No. 420-XVI of December 22, 2006 on technical regulation (The official monitor of the Republic of Moldova, 2007, Art. No. 36-38 141), with subsequent changes and amendments, and the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity (The official monitor of the Republic of Moldova, 2012, Art. No. 46-47, 136) DECIDES: the Government

1. Approve the Technical regulation about non-automatic weight measuring devices it (is applied).

2. This Resolution becomes effective after 30 months from the date of publication in the Official monitor of the Republic of Moldova.

3. To the Ministry of Economy and Infrastructure before enforcement of this Resolution to develop to develop and approve the action plan on implementation of the Technical regulation about non-automatic weight measuring devices, except for Items 31, of 32, of 64, of 65, 70 and 71, which will become effective from the date of entry into force of the Agreement on assessment of conformity and the acceptability of manufactured goods between the Republic of Moldova and the European Union.

3-1. Presence in the market of non-automatic weight measuring devices which meet the requirements of regulations, applicable to them, for legislative metrology, to the introduction in operation of this resolution before expiration of approval of standard sample is allowed.

3-2. Before entry into force of the Agreement on assessment of conformity and the acceptability of manufactured goods between the Republic of Moldova and the European Union:

1) presence in the market and commissioning of the non-automatic weight measuring devices marked by the mark of conformity of SM put according to requirements of the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity is allowed;

2) the producer or his authorized representative, the legal entity with location in the Republic of Moldova puts mark of conformity of SM in case assessment of conformity of the non-automatic weight measuring devices intended for the national market is performed by acknowledged conformity assessment bodies by use of the procedures provided by Chapter III of the Technical regulation about non-automatic weight measuring devices. It is forbidden according to the conditions provided by this resolution, simultaneous drawing on the same gage of mark of conformity of SM and marking of compliance of SE;

3) provisions of this resolution to marking of SE are applied also to mark of conformity of SM;

4) the Ministry of Economy and Infrastructure recognizes the bodies performing assessment of conformity of the non-automatic weight measuring devices intended for the national market according to the procedures provided in Chapter III of the Technical regulation about non-automatic weight measuring devices;

5) requirements to notified conformity assessment bodies are applied also to acknowledged conformity assessment bodies. When holding procedures for assessment of conformity the acknowledged bodies performing assessment of conformity of non-automatic weight measuring devices constitute the test certificate of standard sample;

6) the list of acknowledged conformity assessment bodies for which specific requirements were acknowledged is published in the Official monitor of the Republic of Moldova.

3-3. Obligations and liability of the producer, his authorized representative, the importer or the distributor, legal entities with the location in the Republic of Moldova concerning the non-automatic weight measuring devices which are present at the market and put into operation with the sign SM correspond the provided this resolution for non-automatic weight measuring devices with marking of SE.

4. To impose control over the implementation of this Resolution on the Ministry of Economy and Infrastructure.

Prime Minister

Yury Lyanke

Countersigns:

deputy. Prime Minister, Minister of Economic Affairs

 

Valery Lazer

 

Appendix

to the Order of the Government of the Republic of Moldova of April 8, 2014 No. 267

The technical regulation about non-automatic weight measuring devices

This Technical regulation partially shifts the Directive 2014/31/EU of the European Parliament and Council of February 26, 2014 about harmonization of the legislation of state members on presence in the market of non-automatic weight measuring devices (new edition), with the corresponding text for EEP, published in the Official magazine of the European Union No. L 96 of March 29, 2014.

I. Scope of application

1. The technical regulation about non-automatic weight measuring devices (further – the Technical regulation) establishes requirements to non-automatic weight measuring devices, and also placement conditions in the market and commissioning.

2. This Technical regulation is applied to all non-automatic weight measuring devices. For the purposes of this Technical regulation differentiate the following fields of use of non-automatic weight measuring devices:

a) determination of weight for commercial transactions;

b) determination of weight for calculation of duty, rate, tax, award, penalty, compensation, compensation or other similar payment;

c) determination of weight for application in some requirements of legal acts either in some provisions or for pronouncement of the expert judicial opinion;

d) determination of weight in medical practice from the point of view of weighing of patients for the purpose of monitoring, diagnostics and treatment;

e) determination of weight for production according to recipes of medicines in drugstores and determination of weight during the analyses which are carried out in medical and pharmaceutical laboratories;

f) determination of the price depending on weight for the purpose of direct sales to the population and productions of packaged goods.

II. General provisions

3. In this Technical regulation the terminology determined in the Law on metrology No. 19 of March 4, 2016, the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity and also the following concepts is used:

the weight measuring device – the measuring device for determination of body weight using gravity of body. Also non-automatic measuring device can serve for determination of other sizes, quantity, parameters or characteristics of weight;

the non-automatic weight measuring device – the measuring device which requires operator intervention during weighing;

4. The non-automatic weight measuring devices specified in Item 2 of this Technical regulation can be presented at the market, only if they fulfill the imposed requirements provided in appendix No. 1 to this Technical regulation.

The non-automatic weight measuring devices used in the areas provided in Item 2 of this Technical regulation can be put into operation only in case they conform to the applied requirements of this Technical regulation, including the assessment procedures of compliance provided in Chapter III and have the mark of conformity of SE put according to provisions of Chapter IV of this Technical regulation.

4-1. Representation in the market and putting into operation of the non-automatic weight measuring devices specified in Item 2 of this Technical regulation which meet the requirements of this Technical regulation, applicable to them, cannot be limited.

4-2. The importer or the distributor for the purposes of this Technical regulation carries out obligations and bears responsibility, assigned to the producer, in case of placement in the market of the non-automatic weight measuring device under his name or trademark or changes the device of the non-automatic weight measuring device which is already entered on the market in such a way that can affect its compliance to requirements of this Technical regulation.

5. Consider that non-automatic weight measuring devices conform to the essential requirements provided in appendix No. 1 to this Technical regulation if they conform to the European harmonized standards, references to which are published in the Official magazine of the European Union, accepted as the Moldavian standards.

6. The list of the Moldavian standards which accept the harmonized European standards affirms and updated by the order of the Minister of Economic Affairs and published in the Official monitor of the Republic of Moldova. This list is updated every time, when necessary, but at least once a year.

7. Conformity assessment bodies will perform activities according to requirements of the applied reference standards approved by the order of the Minister of Economic Affairs.

8. The minimum criteria for recognition of conformity assessment bodies are established in Chapter VII to this Technical regulation.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.