ORDER I.O OF THE MINISTER OF INVESTMENTS AND DEVELOPMENT OF THE REPUBLIC OF KAZAKHSTAN

of March 26, 2015 No. 345

About approval of Rules of radio engineering flight servicing and aviation radio communication in civil aviation

According to subitem 41-17) of Item 1 of article 14 of the Law of the Republic of Kazakhstan of July 15, 2010 "About use of airspace of the Republic of Kazakhstan and activities of aircraft" PRIKAZYVAYU:

1. Approve the enclosed Rules of radio engineering flight servicing and aviation radio communication in civil aviation.

2. To committee of civil aviation of the Ministry for Investments and Development of the Republic of Kazakhstan (Seydakhmetov B. K.) provide:

1) in the procedure established by the legislation state registration of this order in the Ministry of Justice of the Republic of Kazakhstan;

2) within ten calendar days after state registration of this order in the Ministry of Justice of the Republic of Kazakhstan the direction it the copy on official publication in periodic printed publicity materials and information system of law of Ad_let;

3) placement of this order on Internet resource of the Ministry for Investments and Development of the Republic of Kazakhstan and on the intranet portal of state bodies;

4) within ten working days after state registration of this order in the Ministry of Justice of the Republic of Kazakhstan submission to Legal department of the Ministry for Investments and Development of the Republic of Kazakhstan of data on execution of the actions provided by subitems 1), 2) and 3) of Item 2 of this order.

3. I reserve control over execution of this order.

4. This order becomes effective after ten calendar days after day of its first official publication.

It is approved Minister of Energy of the Republic of Kazakhstan April 24, 2015

___________ V. Shkolnik

Approved by the Order of the acting minister on investments and development of the Republic of Kazakhstan of March 26, 2015 No. 345

Rules of radio engineering flight servicing and aviation radio communication in civil aviation

1. General provisions

1. Rules of radio engineering flight servicing and aviation radio communication in civil aviation (further - Rules) determine procedure for radio engineering flight servicing and aviation radio communication (further - RTOP and bonds), the basic principles of technical operation and repair aimed at providing reliability of functioning of objects of RTOP and communication.

2. Provisions of these rules are implemented and provided leading and the engineering personnel of services of operation of the radio-radar equipment and radio communication (further - ERTOS) in civil aviation organizations (further - the GA organization) using in the activities means of RTOP and the bonds ensuring aviation safety of AF and productive activity of the GA organizations.

3. Ensuring functions on radio engineering flight servicing of AF, aviation telecommunication and productive activity in the GA organizations is performed by services ERTOS, other divisions which activities are regulated by these rules.

4. Safety and flight regularity of AF depends on equipment of the airports, airways, local airlines (further - MVL), basic services (Items) terrestrial facilities of RTOP and communication, technological level, extent of automation and reliability of functioning of these means and training level of the specialists operating and using terrestrial facilities of RTOP and communication.

5. In these rules the following determinations are used:

1) the GA organization - the legal entity performing activities in the field of civil aviation;

2) the subscriber (the user of network) of operation of radio engineering flight servicing and communication - the organization, service or the service employee having the appropriated index and networks of telecommunication using in the activities;

3) the station of network of the aviation fixed telecommunication - the station which is part of network of the aviation fixed telecommunication and operating with permission or under control of the state;

4) aviation air telecommunication - telecommunication between onboard and aviation fixed stations or between onboard stations;

5) aviation fixed station - the station of aviation land telecommunication;

6) aviation radio communication - the aviation air telecommunication and radio communication between the certain fixed Items intended mainly for safety control of air navigation, and also regularity and efficiency of air traffics;

7) aviation telecommunication - telecommunication intended for any aviation purposes;

8) the station of aviation telecommunication - the station of aviation land and air telecommunication;

9) the channel of aviation telecommunication (transmission channel) - the set of engineering devices and the circle of distribution of electrical signals and radio signals providing information transfer from the sender to the receiver;

10) body of aviation telecommunication - the body responsible for operation of one or several stations of aviation telecommunication;

11) network of the aviation fixed telecommunication (further - AFTN) - the world system of the aviation fixed telecommunication chains which is part of aviation terrestrial electric communication and providing exchange to messages and/or digital data between aviation fixed stations with similar or compatible coherent characteristics;

12) running repair - the repair which is carried out for providing or maintenance of product and consisting in replacement and (or) recovery of separate parts;

13) authorized body in the field of civil aviation - the central actuator performing management in the field of use of airspace of the Republic of Kazakhstan and activities of civil and experimental aviation;

14) exchange collection - permanent and systematically renewable product inventory, the nodes, blocks and devices beforehand serviced, repaired, checked which are established on objects (products) in case of maintenance or repair of the products, nodes, blocks and devices which are subject to check and repair;

15) replacement redundancy - dynamic reservation in case of which functions of leading particular are transferred reserve only after refusal of leading particular;

16) the determining parameter (sign) - the parameter (sign) of object (product, the channel of telecommunication) used in case of control for determination of degree of product availability of object of control;

17) disaster - the condition in case of which there is serious and/or direct danger and is required the immediate help;

18) operating time - duration or work content of product measured in flight hours, number of landings, number of cycles, operations, that is resource expense;

19) TEZ the standard element of replacement consisting of set of the elements and details necessary for accomplishment determined functions and intended for operational replacement;

20) aeronautical information - information obtained as a result of collection, the analysis and data processing for the purposes of flight servicing of air vehicles, air traffic maintenance and air traffic control;

21) communication circuit - the communication system which is turning on all direct channels between two stations;

22) disruption of communication - lack of communication during period of time, important for operation;

23) other departments - the organizations which are not performing within the competence air traffic management and radio engineering flight servicing and telecommunication in civil aviation;

24) the appointed resource - total operating time of product in case of which achievement application shall be to destination stopped;

25) the onboard station - the mobile station of aviation air telecommunication established onboard the air vehicle;

26) damage - the event consisting in violation of serviceable condition of product when preserving operating state;

27) product - unit serially products intended for accomplishment of certain function;

28) the block diagram of product - the scheme determining the main functional parts of product, their assignment and interrelation;

29) refusal of product - the event consisting in violation of operability of product;

30) creeping failure - the refusal which is characterized by gradual change of values of one or several set product parameters;

31) general reservation - reservation in case of which the reserved element is object in general;

32) non-operational condition (defect) - condition of product in case of which it does not correspond at least to one of requirements of normative and technical and (or) design documentation;

33) serviceable condition (operability) - condition of product in case of which it conforms to all requirements of normative and technical and (or) design documentation;

34) operational maintenance - the periodic maintenance providing bystry accomplishment of the simple technological transactions established by the instruction (regulations) of maintenance on control and maintenance of operability of object (product, the channel of aviation telecommunication);

35) individual protection equipment - the means intended for protection one working;

36) the land radio radiating means - the land radio engineering means intended for transfer of radio frequencies and consisting of one or several sending devices or their combinations including auxiliary equipment.

37) aviation land telecommunication - telecommunication between the certain fixed Items intended mainly for safety control of air navigation, and also regularity, efficiency and profitability of air traffics;

38) not loaded reserve - reserve which contains one or several reserve elements which are in not loaded mode prior to accomplishment of functions of leading particular by them;

39) mobile land station - the station of aviation telecommunication which is not the onboard station which is held for use during movement or stop in the Items which are not provided in advance;

40) scheduled repair - the repair performed according to requirements of the specifications and technical documentation;

41) maintainability - the property of product consisting in fitness to the prevention and detection of origins of refusals, damages, to maintenance and recovery of operating state by carrying out maintenance and repairs;

42) operating state (working capacity) - condition of product in case of which values of all parameters characterizing capability to perform the set functions, conform to requirements of normative and technical and (or) design documentation;

43) disabled condition (nonserviceability) - the condition of product in case of which value at least of one parameter characterizing capability to perform the set functions, does not conform to requirements of normative and technical and (or) design documentation;

44) index - the appointed number to the subscriber of telephone exchange, index of the station of network of the aviation fixed telecommunication, signal in radio network;

45) sudden refusal - the refusal which is characterized by intermittent change of values of one or several set product parameters;

46) board of the guaranteed power supply - the distribution device on which after failure of one power source the electric power tension is recovered from other source through the guaranteed time;

47) dangerous production factor - production factor which impact on working in certain conditions leads to injury or other sudden sharp deterioration in health;

48) the scheme of connection - the scheme showing external connections of product;

49) refusal constructional - the refusal which resulted from imperfection or violation of statutory rules and (or) regulations of designing;

50) the device - the set of elements representing single design (the block, payment, cabinet, the mechanism);

51) service life - the calendar duration of operation of product from its beginning or renewal after repair before limiting condition;

52) the appointed service life - the calendar duration of operation of product in case of which achievement application shall be to destination stopped;

53) maintenance with periodic control - maintenance in case of which control of technical condition is carried out with the frequency and amount established in the specifications and technical documentation (regulations) and the amount of other transactions is determined by technical condition of product at the time of the beginning of maintenance;

54) leading particular - the element of structure of object necessary for accomplishment by object of the required functions in the absence of refusals of its elements;

55) to NOTES - the notices sent by means of telecommunication and containing information on enforcement, condition or change of any aeronautical equipment, servicing and rules, or information on danger, the timely prevention of which is important for the personnel connected with accomplishment of flights;

56) refusal of object (disruption of communication) - the event consisting in violation of operability of object (the channel of telecommunication), which led to the fact that object (the channel of telecommunication) cannot be used for ensuring accomplishment of certain function(s) during time of more admissible;

57) degree of product availability of object (product) - the technical condition characterized by compliance or discrepancy of quality of object (product) to the technical requirements established by technical documentation on this object (product). Differentiate degrees of product availability: operability and defect, working capacity and nonserviceability;

58) operating control of operability of object (product, the channel of aviation telecommunication) - the control providing accomplishment of technologically simple functional checks of object (product, the channel of telecommunication) in the course of its functioning;

59) replaceable personnel of object - the operational engineering personnel of objects of service of operation of the radio-radar equipment and communication working according to the replaceable schedule, controlling work of non-automated objects of RTOP and communication;

60) engineering personnel of objects - the personnel of objects of service of operation of the radio-radar equipment and communication working according to five-day business week, providing operation of the equipment according to these rules, the operating documentation and regulating documents RK.

61) the facilitated reserve - reserve which contains one or several reserve elements which are in less loaded mode than leading particular;

62) average time between failures - the product operating time relation to number of its refusals during this operating time;

63) the decentralized electric utility service (electric utility service from autonomous power sources the electric power) - the utility power system which does not have electric bonds with power system or having bonds on which parallel or concurrent work is not provided;

64) centralized electric utility service - electric utility service of consumers from power system;

65) the depersonalized repair method - method of repair in case of which belonging of the recovered constituents to certain copy of product does not remain;

66) gage device - the technical tool intended for measurements and having the normalized metrological characteristics;

67) checking of gage devices - set of the transactions which are carried out by the public metrological service or other accredited legal entities for the purpose of determination and confirmation of conformity of gage device to the established technical and metrological requirements;

68) remedy on production - means which application prevents or reduces impact by one or more working dangerous and (or) harmful production factors;

69) safety of production equipment - property of production equipment to keep compliance to safety requirements in case of accomplishment of the set functions;

70) production sanitation - system of the organizational actions and technical means preventing or reducing impact on the working harmful production factors;

71) refusal production - the refusal which resulted from imperfection or violation of the established process of production or repair of the product which was carried out at the repair plant;

72) refusal operational - the refusal which resulted from violation of statutory rules and (or) operating conditions of product;

73) the operating documentation - the documentation regulating technical operation of product and containing operational restrictions, procedures and recommendations;

74) the anticipatory admission of parameter - the range of change of parameter values in which according to operating or repair documentation operability of product when preserving its working capacity is broken;

75) maximum permissible parameter value - the greatest or smallest parameter value which shall have operable product;

76) the admission (upper, lower) parameter (further - operating tolerance) - difference between upper (lower) maximum permissible and nominal parameter values;

77) frequency rate of reserve - the relation of number of reserve elements of object to number of the leading particulars of object reserved by them expressed by unreduced fraction;

78) allowed time of switching (transition) to reserve - time determined by the operating documentation on product for which there is switching of means of RTOP and communication to reserve set or semi-set of the equipment, taking into account full engagement in work of means of RTOP and communication;

79) scheduled operation (transaction) - work (transaction) provided by the maintenance schedule;

80) reservation - use of additional resources and (or) opportunities for the purpose of preserving operating state of object in case of refusal of one or several of its elements;

81) reserve element - the object element intended for accomplishment of functions of leading particular in case of refusal the last;

82) replaceable personnel of service ERTOS - the operational engineering personnel of service of operation of the radio-radar equipment and communication working according to the replaceable schedule, organizing work of replaceable personnel of object and engineering personnels of object of service ERTOS, exercising operating control and management of the automated and non-automated objects of RTOP and communication, and also providing interaction of service ERTOS with adjacent services;

83) reliability - property of product which depends on time during which it is capable to perform required functions in the set modes and conditions of use, maintenance, repairs, storages and transportations;

84) reliability indicator - the quantity characteristic of one or several properties making reliability of product;

85) scheme element - constituent of the scheme which performs certain function in product and cannot be divided into the parts having independent functional purpose (the resistor, the transformer, the pump, the coupling).

86) technical condition - set subject to change in use properties of product, characterized at a given time by the determining parameters (signs) set by technical documentation to this product;

87) control of technical condition - determination of technical condition;

88) repair on technical condition - repair in case of which control of technical condition is carried out with the frequency established in the specifications and technical documentation and I will eat around and the moment of the beginning of repair are determined by technical condition of product;

89) the maintenance schedule - the document establishing frequency and amount of maintenance of radio engineering product;

90) maintenance - complex of transactions (or transaction) on maintenance of working capacity or operability of product in case of proper use, storage and transportation. Understand the maintenance (repair) allocated on one of signs as category of maintenance (repair): to stage of existence, frequency, scope of work, operating conditions, regulation;

91) maintenance rate (repair) - time interval or practices between this category of maintenance (repair) and the subsequent same type or another of bigger complexity;

92) the process chart of maintenance - the document containing procedure for accomplishment of procedural transactions, technical requirements, the applied means and necessary labor costs;

93) technical resource (resource) - product operating time from the beginning of its operation or its renewal after repair of certain type before transition to limiting condition;

94) non-failure operation - property of product is continuous to keep working capacity for some time or some operating time;

95) transformer substation - the electric substation intended for transformation of the electric power of one tension to energy of other tension by means of transformers;

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info