Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

RESOLUTION OF THE CABINET OF MINISTERS OF UKRAINE

of December 30, 2015 No. 1184

About approval of form, the description of mark of conformity to technical regulations, rules and conditions of its drawing

(as amended on 10-03-2021)

According to article 29 of the Law of Ukraine "About technical regulations and assessment of conformity" the Cabinet of Ministers of Ukraine decides:

1. Approve enclosed:

form of mark of conformity to technical regulations;

description of mark of conformity to technical regulations;

rules and conditions of drawing mark of conformity to technical regulations.

2. Recognize invalid resolutions of the Cabinet of Ministers of Ukraine according to the list which is attached.

3. This resolution becomes effective along with the Law of Ukraine "About technical regulations and assessment of conformity".

Prime Minister of Ukraine

A. Yatsenyuk

Approved by the Resolution of the Cabinet of Ministers of Ukraine of December 30, 2015 No. 1184

Form of mark of conformity to technical regulations

Рисунок к Пост от 30.12.2015 г. №1184

Approved by the Resolution of the Cabinet of Ministers of Ukraine of December 30, 2015 No. 1184

Description of mark of conformity to technical regulations

1. The mark of conformity to technical regulations (further - mark of conformity) has the form of the circle which is not closed on the right side in which the stylized image of shamrock is placed. Length of gap of circle constitutes 0,22 of its total length (or 80 degrees).

2. The image of mark of conformity can be flat and is carried out by two contrast colors or relief one color.

3. Height of mark of conformity cannot be less than 5 millimeters if other is not provided by the corresponding technical regulation.

4. In case of reduction or increase in the size of mark of conformity proportions of its form shall be observed.

The variation from proportions of the image and form of mark of conformity to 20 percent in connection with technological features of its drawing is allowed.

Approved by the Resolution of the Cabinet of Ministers of Ukraine of December 30, 2015 No. 1184

Rules and conditions of drawing mark of conformity to technical regulations

1. The mark of conformity is applied to technical regulations (further - mark of conformity) on products or on its plate with specifications so that it was visible, legible and indelible. If it is impossible or is unjustified because of nature of products, the mark of conformity is applied on packaging and on accompanying documents if such documents are provided by the corresponding technical regulation.

2. The mark of conformity is put before introduction of products in the address. The mark of conformity can be followed by the pictogram or any other sign specifying extra risk or use.

3. The mark of conformity is followed by identification number of the appointed conformity assessment body if such body was attracted at production control stage, in the UA.TR.YYY or YYY format where:

UA - symbol of Ukraine Latin letters;

TR - symbol which means that the conformity assessment body is appointed to performance of works on assessment of conformity to requirements of technical regulations;

YYY - identification number of the appointed conformity assessment body.

Identification number of the appointed conformity assessment body is put with such body or for its specifying by the producer or the authorized representative.

Approved by the Resolution of the Cabinet of Ministers of Ukraine of December 30, 2015, No. 1184

List of resolutions of the Cabinet of Ministers of Ukraine, invalid

1. The resolution of the Cabinet of Ministers of Ukraine of November 29, 2001 No. 1599 "About approval of the description and rules of application of national mark of conformity" (The Official Bulletin of Ukraine, 2001, No. 49, the Art. 2188).

2. The resolution of the Cabinet of Ministers of Ukraine of May 11, 2006 No. 632 "About introduction of amendments to the resolution of the Cabinet of Ministers of Ukraine of November 29, 2001 No. 1599" (The Official Bulletin of Ukraine, 2006, No. 20, the Art. 1451).

3. Item of 6 changes which are made to resolutions of the Cabinet of Ministers of Ukraine concerning protection of the documents and goods holographic protective elements approved by the resolution of the Cabinet of Ministers of Ukraine of February 9, 2011 No. 86 (The Official Bulletin of Ukraine, 2011, No. 10, by the Art. 463).

4. Item of 1 changes which are made to resolutions of the Cabinet of Ministers of Ukraine, approved by the resolution of the Cabinet of Ministers of Ukraine of June 18, 2012 No. 708 "About approval of Rules of preparation of drafts of the technical regulations developed on the basis of acts of the European Union law which affirm the Cabinet of Ministers of Ukraine" (The Official Bulletin of Ukraine, 2012, No. 59, of the Art. 2370).

5. The resolution of the Cabinet of Ministers of Ukraine of August 6, 2014 No. 312 "About modification of rules of application of national mark of conformity" (The Official Bulletin of Ukraine, 2014, No. 64, the Art. 1766).

 

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.