Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

ORDER OF THE AGENCY OF LAND RELATIONS AND INVENTORY OF THE REPUBLIC OF MOLDOVA

of April 7, 2016 No. 48

About approval of stamp for land and cartographical works

In pursuance of the appeal of the State inspectorate for geodetic, technical supervision and the mode No. 04/2-06/78 of March 3 2016, according to Item 13 of the Instruction for survey in scales 1:5000, 1:2000, 1:1000, 1:500 and to production of engineering and geodetic researches for construction of PRIKAZYVAYU:

1. Approve stamp for land and cartographical works, according to appendix No. 1.

2. Approve the Explanatory note to stamp for land and cartographical works, according to appendix No. 2.

3. Application of the stamp mentioned in item 1 of this order is obligatory for all companies, the organizations and organizations performing land and cartographical works in the territory of the Republic of Moldova.

4. To impose control of observance of provisions of this order on the State inspectorate for geodetic, technical supervision and the mode.

5. This order is published in the Official monitor of the Republic of Moldova.

6. I reserve control of execution of this order.

CEO of the Agency of land relations and inventory

Anatoliye Gilash

Appendix №1

to the Order of the Agency of land relations and the inventory of the Republic of Moldova of April 7, 2016 No. 48

Stamp parameters for land and cartographical works

Рисунок 1 к Приказу РМ от 07.04.2016 г. №48

 

Appendix №2

to the Order of the Agency of land relations and the inventory of the Republic of Moldova of April 7, 2016 No. 48

The explanatory note to stamp for land and cartographical works

Any end product of land and cartographical works shall contain stamp.

This explanatory note determines the fields containing information used in case of development of technical documentation of end product of land and cartographical works; stamp, being applicable both to digital, and to analog graphical representation of works.

The stamp is located in the bottom right corner of limits of the plan, in provision, convenient for reading.

The data provided in stamp are stated below in the description, with assignment (each of fields) of the corresponding number.

1. The company performing works

The company which performed works, identified by means of the official, reduced name or seal and license number on land and/or cartographic activities is specified.

2. Customer of works

In this field the complete name of the physical person or legal entity which is the customer of works is entered.

3. Object address

The address of the real estate unit which is object for accomplishment of land and cartographical works in the presence fits in, also cadastral number of real estate object is specified.

4. Work type

In this field data on work type, according to provisions of Art. 3 of the Law on geodesy, cartography and geoinformatics No. 778 of December 27, 2001 are specified. (Official Monitor of the Republic of Moldova, 2002, No. 29-31, Art. 160).

In fields 5-10 the data concerning persons who performed fit in and checked land and cartographical work. Submission of information in the respective fields is performed in the following sequence:

Рисунок 3 к Приказу РМ от 07.04.2016 г. №48

5. Director

6. The certified engineer

7. Contractor

8. The digital drawing (person which executed the digital drawing)

9. The drawing on the tablet (person making changes on the tablet)

10. Other persons participating in performance of work.

11. Date of performance of works

Date or the period in which land and cartographical work was performed is specified.

12. Date of acceptance of work

Date of acceptance of the land and cartographical work which is carried out by competent authority is specified.

13. System of coordinates

The system of coordinates in which land and cartographical work was performed is specified.

14. Geodetic basis of land works

In the respective field the name and tia of Item of geodetic network is specified, in need of PS/Union of Right Forces of GNSS which were were basis for accomplishment of these land and cartographical works.

15. System of heights

In this field information I to system of heights in which land and cartographical works were performed fits in.

16. Scale

The scale in which the plan, in the form of numerical scale is provided (example is specified: 1:500).

17. Relief section height

In the respective field relief section height, with indication of value in meters fits in.

18. Number of the page

Number of the page on which this stamp, from total number of pages of land and cartographical work is located fits in.

19. Total number of pages

Total number of pages on which the end product of land and cartographical works is provided is specified.

20. Order number

This field is not obligatory filling in which records about object of works, based on the internal register of the contractor or based on the contract for provision of services are performed.

21. Registration number

Registration number of work from "The module of registration of works of the State Inspectorate for Geodetic, Technical Supervision and the Mode" or from the register of accounting of land and cartographical works of the body responsible for acceptance of the corresponding works is specified.

22. Notes

This field is not obligatory for filling and serves for record of the additional information promoting work identification.

The example of filling of stamp is given below.

Рисунок 2 к Приказу РМ от 07.04.2016 г. №48

 

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.