ORDER OF THE GOVERNMENT OF THE REPUBLIC OF MOLDOVA

of October 22, 2015 No. 744

About approval of the Technical regulation concerning the rope installations intended for transportation of people

According to part provisions (1) Article 18 and line item 22 appendices 3 to the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity (The official monitor of the Republic of Moldova, 2012, Art. No. 46-47, 136) DECIDES: the Government

1. Approve the Technical regulation concerning the rope installations intended for transportation of people it (is applied).

2. To the Ministry of Economy and Infrastructure within 6 months of date of publication of this resolution to develop and approve the list of the harmonized standards and the plan of implementation of the Technical regulation concerning the rope installations intended for transportation of people.

3. This resolution becomes effective after 24 months from the date of publication in the Official monitor of the Republic of Moldova, except for Items 46, of 48, of 50, 52 and 54 Technical regulations, concerning the rope installations intended for transportation of people who will become effective from the date of entry into force of the law on ratification of the Agreement on assessment of conformity and the acceptability of manufactured goods between the Republic of Moldova and the European Union.

4. Before the date of entry into force of the law on ratification of the Agreement on assessment of conformity and the acceptability of manufactured goods between the Republic of Moldova and the European Union:

1) are allowed presence in the market and commissioning of the rope installations intended for transportation of people whose components of safety are marked by mark of conformity of SM, and the subsystems intended for them which are followed by the declaration of conformity applied according to the requirements provided in the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity;

2) the producer or his authorized representative, the legal entity with the location in the Republic of Moldova, applies mark of conformity of SM in case assessment of conformity of the rope installations and components of safety intended for the national market is performed by acknowledged conformity assessment bodies by application of the procedures provided in Chapter III of the Technical regulation concerning the rope installations intended for transportation of people;

3) it is forbidden in the conditions provided by the Technical regulation concerning the rope installations intended for transportation of people, drawing on the same component of safety of the sign SM and marking of SE;

4) the Ministry of Economy and Infrastructure recognizes the bodies performing assessment of conformity of the installations intended for the national market according to the procedures provided in Chapter III of this Technical regulation concerning the rope installations intended for transportation of people. The procedure of notification is performed after the procedure of recognition established in Chapter IV-1 of the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity;

5) requirements to notified conformity assessment bodies are applied also to the acknowledged conformity assessment bodies having similar legal status according to Law No. 235 provisions of December 1, 2011 on activities for accreditation and assessment of conformity. When holding procedures for assessment of conformity the acknowledged bodies performing assessment of conformity of rope installations of the people intended for transportation constitute the test certificate of standard sample;

6) the list including acknowledged conformity assessment bodies and their identification numbers is kept by the National center of accreditation MOLDAC and published on its official site.

5. Obligations and liability of the producer, his authorized representative, the importer or the distributor – legal entities with the location in the Republic of Moldova, concerning the rope installations put into operation with mark of conformity of SM correspond the provided this resolution for rope installations with marking of SE.

6. To impose control over the implementation of this resolution on the Ministry of Economy and Infrastructure.

Approved by the Order of the Government of the Republic of Moldova of October 22, 2015, No. 744

The technical regulation concerning the rope installations intended for transportation of people

The technical regulation concerning the rope installations intended for transportation of people partially shifts the Directive 2000/9/EU of the European Parliament and Council of March 20, 2000 concerning the rope installations intended for transportation of people, published in the Official magazine of the European Union by L 106 of May 3, 2000.

Chapter I. General provisions

1. The technical regulation concerning the rope installations intended for transportation of people (further - the Technical regulation), establishes safety requirements for the rope installations intended for transportation of people, the assessment procedures of compliance confirming compliance to safety requirements, actions which need to be undertaken within supervision of the market in case rope installations do not conform to the established requirements or constitute danger to users.

2. The installations on steel ropes intended for transportation of people (further - rope installations), are designed, designed, put into operation and operated for the purpose of transportation of people. Rope installations are used in mountain tourist resorts and chair, kabinny and towing for skiers include funiculars, suspended ropeways, but can also include the rope installations used in urban transportation.

3. For the purpose of this Technical regulation the concepts determined in the Law No. 235 of December 1, 2011 on activities for accreditation and assessment of conformity, the Law No. 422-XVI of December 22, 2006 on general safety of products and the following concepts are used:

installation – the system which is completely established on the area, covering the infrastructure and subsystems provided in appendix No. 1 to this Technical regulation; the infrastructure which is specially designed for each installation and constructed on the area includes installation route, system of data, linear works and stations which are necessary for construction and operation of installations, including the bases;

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info