ORDER OF THE MINISTER OF NATIONAL ECONOMY OF THE REPUBLIC OF KAZAKHSTAN

of November 27, 2014 No. 114

About approval of Rules of certification of the experts who are carrying out expert works and engineering services in the field of architectural, town-planning and construction activities

According to subitem 11-1) of article 20 of the Law of the Republic of Kazakhstan of July 16, 2001 "About architectural, town-planning and construction activities in the Republic of Kazakhstan" and the subitem 1) article 10 of the Law of the Republic of Kazakhstan of April 15, 2013 "About the state services" PRIKAZYVAYU:

1. Approve the enclosed Rules of certification of the experts who are carrying out expert works and engineering services in the field of architectural, town-planning and construction activities.

2. To committee on cases of construction, housing and communal services and management of land resources of the Ministry of national economy of the Republic of Kazakhstan (Smagulov B. A.) provide:

1) state registration of this order in the Ministry of Justice of the Republic of Kazakhstan and its official publication in information system of law of Ad_let and in official mass media;

2) placement of this order of pas official Internet resource of the Ministry of national economy of the Republic of Kazakhstan.

3. To impose control of execution of this order on the Vice-Minister of national economy of the Republic of Kazakhstan Uskenbayev Kairbek Aytbayevich.

4. This order becomes effective after ten calendar days after day of its first official publication.

Approved by the Order of the Minister of national economy of the Republic of Kazakhstan of November 27, 2014 No. 114

Rules of certification of the experts who are carrying out expert works and engineering services in the field of architectural, town-planning and construction activities

Chapter 1. General provisions

1. These rules of certification of the experts who are carrying out expert works and engineering services in the field of architectural, town-planning and construction activities (further - Rules) are developed according to the Law of the Republic of Kazakhstan of July 16, 2001 "About architectural, town-planning and construction activities in the Republic of Kazakhstan" and the subitem 1) of article 10 of the Law of the Republic of Kazakhstan of April 15, 2013 "About the state services" and determine procedure for carrying out certification of the experts who are carrying out expert works and engineering services and rendering the state service "Certification of the Experts Who Are Carrying Out Expert Works and Engineering Services in the field of Architectural, Town-planning and Construction Activities".

2. In these rules the following concepts are applied:

1) authorized body - department of the central state body performing management in the field of public administration of architectural, town-planning and construction activities;

2) engineering services in the field of architectural, town-planning and construction activities - the range of services (technical and author's supervisions) providing preparation and implementation of construction for the purpose of achievement of optimum project indicators;

3) expert works - works on examination of projects and carrying out technical inspection of reliability and stability of buildings and constructions;

4) the expert - the physical person performing certain types of expert works and engineering services in the field of architectural, town-planning and construction activities;

5) the certificate of the expert - the competence certificate certifying the status of the expert and his right to accomplishment of expert works and engineering services in the field of architectural, town-planning and construction activities;

6) the applicant - the physical person applying for receipt of the status of the expert;

7) local authorized body - the structural division of local executive body which considers documents on conformance to requirements, approves the list of the experts allowed to testing and the schedule of conducting testing, and also makes the decision on passing by experts of certification.

3. Certification is carried out for the purpose of determination of the professional training level and competence of experts, knowledge of the state standard rates in the field of architecture, town planning and construction and environmental protection, in the field of sanitary and epidemiologic wellbeing of the population and hygienic standard rates, improvement of quality of the works which are carried out by them, studying of new requirements, taking into account the changes happening in building sector.

4. Certification is carried out for the experts performing the following types of expert works and engineering services:

1) examination town-planning, preproject and design estimates;

2) test authority;

3) designer's service;

4) technical inspection of reliability and stability of buildings and constructions.

5. Examination experts town-planning, preproject and the design estimates are subdivided on the following specializations:

1) town planning;

2) preproject documentation;

3) architecture;

4) constructive part;

5) engineering networks and systems (by types of engineering networks and systems);

6) technological part (depending on purpose of object);

7) estimate part;

8) fire safety;

9) ecological part;

10) sanitary and epidemiologic profile.

6. Experts in implementation of test authority are subdivided into the following specializations:

1) on objects of the first level of responsibility - regarding the bearing and protecting designs;

2) on objects of the first level of responsibility - regarding engineering networks;

3) on objects of the first level of responsibility - regarding processing equipment;

4) on objects of the second and third levels of responsibility - regarding the bearing and protecting designs;

5) on objects of the second and third levels of responsibility - regarding engineering networks;

6) on objects of the second and third levels of responsibility - regarding processing equipment.

7. Experts in implementation of designer's service are subdivided on the following specializations:

1) on objects of the first level of responsibility - regarding architecture;

2) on objects of the first level of responsibility - regarding the bearing and protecting designs;

3) on objects of the second and third levels of responsibility - regarding architecture;

4) on objects of the second and third levels of responsibility - regarding the bearing and protecting designs.

8. Experts in implementation of test and designer's service are divided into the following levels of responsibility:

on objects of the first level of responsibility - perform the activities specified in this Item on objects of all levels of responsibility within the having certificate;

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info