Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

The document ceased to be valid since  October 15, 2016 according to Item 3 of the Order of the Government of the Republic of Moldova of  September 22, 2016 No. 1074

ORDER OF THE GOVERNMENT OF THE REPUBLIC OF MOLDOVA

of July 28, 2014 No. 637

About approval of rates and methodology of determination of rates for the services provided by National institute of metrology in the field of metrology

Based on part (3) article 12 of the Law No. 847-XIII of May 24, 1996 on the budget system and the budget process (repeated publication: The official monitor of the Republic of Moldova, special release, 2005), with subsequent changes and amendments, and parts (4) article 32 of the Law No. 98 of May 4, 2012 on the central branch public management (The official monitor of the Republic of Moldova, 2012, Art. No. 160-164, 537), the Government DECIDES:

Approve:

Flat fares on the services provided by National institute of metrology according to appendix No. 1.

Methodology of determination of rates for the services provided by National institute of metrology according to appendix No. 2.

Prime Minister

Iurie Leanca

Countersigns:

Deputy Prime Minister, Minister of Economic Affairs

 

Andrian Kandu

Appendix №1

to the Order of the Government of the Republic of Moldova of July 28, 2014 No. 637

Flat fares on the services provided by National institute of metrology

1. Depending on the services provided by National institute of metrology (further – NIM), establish the following types of rates:

1) flat fares;

2) rates (tables 2, 3 and 4 Items 11) which are calculated on Methodology of determination of rates for the services provided by National institute of metrology in the field of the metrology (further - Methodology) provided in appendix No. 2.

2. Flat fares on the services provided only NIM are given in the table 1 of Item 11. These rates include only expenses which are incurred by NIM in case of provision of services and do not include long-term asset depreciation (depreciation of measuring instruments).

3. Other services provided to NIM and included in the List of paid services in the field of metrology, provided by National institute of metrology will be calculated according to Methodology.

4. Provision of services of NIM is carried out after payment of these services.

5. The deadline of execution of metrological testing for the purpose of approval of type will be determined from the date of approval of the Program of metrological testing and shall not exceed:

1) at most - 20 working days for measuring instruments with the low level of complexity;

2) at most - 50 working days for measuring instruments with the high level of complexity.

6. The deadline of carrying out recognition of metrological testing for the purpose of approval like the imported measuring instruments shall not exceed 15 working days from registration date of the request.

7. The deadline of carrying out checking of legalized measuring instruments shall not exceed 10 working days from registration date of the request in actual fact.

8. Completion date of works on metrological examination of legalized measuring instruments shall not exceed 10 working days from registration date of the request.

9. Completion date of works on calibration shall not exceed the limits specified in the corresponding procedures for calibration, approved by NIM.

10. If checking of legalized measuring instruments cannot be executed by authorized subjects in National system of metrology, checkings will be executed by NIM.

Rates for the checkings which are carried out by NIM will be calculated according to Methodology.

11. Flat fares are specified some services provided to NIM in table 1 below:

Note. The rates given in tables 2-4, are calculated according to the Methodology provided in appendix No. 2 to this Resolution proceeding from the cost of person/hour, equal 67.88 leu.

Table 1

Flat fares on the services provided to NIM:

Name

Rate (excluding VAT), lei

 The Metrological Testing (MT) for the purpose of approval of type:


MI for the purpose of approval like measuring instruments with the low level of complexity:

* (1.1; 1.5-1.9; 1.11; 1.13-1.16; 1.19-1.21; 1.29-1.30; 2.1.1; 2.2.1; 2.2.3; 2.2.5; 2.2.6; 2.3.3; 2.3.4; 2.3.5; 2.3.10; 3.2.2; 3.2.4; 4.1-4.6; 6.1; 6.3; 6.6; 7.1; 8.1-8.3; 11.1-11. 14)

3000

MI for the purpose of approval like measuring instruments with the high level of complexity:

* (2.1.2; 2.1.3; 2.3.1; 2.3.2; 3.1.1-3.1.7; 3.2.7; 4.7; 5.1-5.15; 7.2; 7.3; 8.5-8.11; 9.1-9.3; 10.2-10.6; 12.1-12.14; 13.1-13. 27)

3000

Recognition of results of metrological testing, for the purpose of approval like the new imported measuring instruments

1153.96

Prolongation of term of the certificate of recognition

Free of charge

Recognition of results of calibrations/checkings of the measuring instruments which are carried out in other countries with which mutual agreements are signed

Free of charge

Metrological examination of normative and technical documents

Free of charge

MI for the purpose of approval like the measuring instruments imported in single copies or small batches


Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.