of December 9, 2013 No. 404
About approval of professional standards
According to Item 3 of Article 138-5 of the Labor code of the Republic of Kazakhstan PRIKAZYVAYU:
1. Approve:
1) the professional standard "Geophysical Methods of Search and Investigation of Mineral Deposits" according to appendix 1 to this order;
2) the professional standard "Hydrogeology and Engineering Geology" according to appendix 2 to this order;
3) the professional standard "Geological Shooting, Searches and Investigation of Mineral Deposits" according to appendix 3 to this order;
4) the professional standard "Technology and Technology of Investigation of Mineral Deposits" according to appendix 4 to this order;
5) the professional standard "Underground Mining of Mineral Deposits" according to appendix 5 to this order;
6) the professional standard "Open-cast Mining of Mineral Deposits" according to appendix 6 to this order;
7) the professional standard "Maintenance and Repair of the Mountain Electromechanical Equipment" according to appendix 7 to this order.
2. To committee of geology and subsurface use of the Ministry of the industry and new technologies of the Republic of Kazakhstan (Nurabayev B. K.) in the procedure established by the legislation to provide:
1) state registration of this order in the Ministry of Justice of the Republic of Kazakhstan;
2) within ten calendar days after state registration of this order in the Ministry of Justice of the Republic of Kazakhstan the direction on official publication in mass media and information system of law of Ad_let;
3) placement of this order on Internet resource of the Ministry of the industry and new technologies of the Republic of Kazakhstan.
3. To impose control of execution of this order on the vice-minister of the industry and new technologies of the Republic of Kazakhstan Sauranbayev N. E.
4. This order becomes effective after ten calendar days from the date of its first official publication.
The deputy prime minister of the Republic of Kazakhstan is the Minister of the industry and new technologies of the Republic of Kazakhstan
A. Isekeshev
|
It is approved Minister of Labour and Social Protection of the Republic of Kazakhstan of February 11, 2014 |
T. Duysenova |
Appendix 1
to the Order of the Deputy prime minister of the Republic of Kazakhstan - the Minister of the industry and new technologies of the Republic of Kazakhstan of December 9, 2013 No. 404
1. The professional standard is intended for:
1) developments of single requirements to content of professional activity, updating of the qualification requirements meeting modern requirements of the labor market;
2) solutions of wide range of tasks in the field of personnel management;
3) developments of educational standards, curricula, modular training programs, and also developments of the corresponding educational and methodical materials;
4) evaluating professional readiness and confirmation of conformity of qualification of specialists.
2. The main users of professional standards are:
1) graduates of the organizations of education, workers;
2) heads and employees of the organizations, heads and specialists of divisions of personnel management of the organizations;
3) the specialists developing educational programs;
4) specialists in the field of assessment of professional readiness and confirmation of conformity of qualification of specialists.
3. On the basis of the professional standard internal, corporate standards of the organizations on functional models of activities, position, advanced training, employee assessment, incentive system of work and others can be developed.
4. In this professional standard the following terms and determinations are applied:
1) qualification - readiness of the worker for high-quality accomplishment of specific functions within certain type of labor activity;
2) qualification level / skill level - set of the requirements to employee competences differentiated in parameters of complexity, non-standard of labor actions, responsibility and independence.
3) object of the labor - subject to which actions of the worker for the purpose of creation of product by means of certain labor instruments are directed;
4) labor instruments - the means used by the worker for transformation of object of the labor from initial condition in product;
5) type of labor activity - the component of area of professional activity created by complete set of labor functions and competences, necessary for their accomplishment;
6) labor function - enrollment of the interconnected actions directed to the solution of one or several tasks of process of work;
7) area of professional activity - the set of types of labor activity of industry having general integration basis (similar or close appointment, objects, technologies, including labor instruments) and assuming similar set of labor functions and competences for their accomplishment;
8) the professional standard - the standard determining in specific area of professional activity of the requirement to skill level, competences, to content, quality and working conditions;
9) unit of the professional standard - the structural element of the professional standard containing the developed characteristic of specific labor function which is labor activity, complete, complete, rather autonomous and significant for this type;
10) profession - sort of labor activity which requires ownership of complex of the special theoretical knowledge and practical skills acquired as a result of special preparation, work experience;
11) competence - capability to apply knowledge, abilities and experience in labor activity;
12) position - the functional place in system organizationally - administrative hierarchy of the organization;
13) task - set of the actions connected with realization of labor function and achievement of result with use of specific objects and labor instruments;
14) industry - set of the companies and organizations of which the community of products, the production technology, fixed assets and professional skills working is characteristic;
15) industry frame of qualifications - the structured description of the qualification levels recognized in industry;
16) national frame of qualifications - the structured description of the qualification levels recognized in the labor market;
17) the functional card - the structured description of the labor functions and tasks which are carried out by the worker of certain type of activity within this or that area of professional activity.
5. In this professional standard the following reducings are used:
PD - professional activity;
VD - type of activity;
PS - the professional standard;
NRK - national frame of qualifications;
ORK - Industry frame of qualifications (the order MINT of November 22, 2013 No. 371 "About approval of industry frame of qualifications in the sphere "Geology", No. registered in the Register of state registration of the NPA on December 24, 2013 9018);
ETKS - Single wage rate book of works and professions of working RK;
GKZ - PK 01-2005 GKZ the State qualifier of occupations in RK;
TKH - Standard qualification characteristics of positions of heads, specialists and other employees of the organizations.
6. Type of economic activity (area of professional activity): Geophysical methods of search and investigation of mineral deposits.
7. Main objective of type economic (areas professional) activities: geophysical methods of searches and investigation of mineral deposits
The professional standard establishes in the field of professional activity "Geophysical methods of searches and investigation of mineral deposits" of the requirement to content, quality, working conditions, qualification and employee competences.
8. Types of labor activity, profession, qualification levels are specified in Appendices 1 to this professional standard.
Requirements of the standard belong to types of activity and the following professions of this area: the worker at geophysical works, the driver of the logging station, the serviceman of the geophysical equipment, the logger, the laboratory assistant-radiometrist, the technician-geophysicist.
9. Qualification level on ORK - 1-2
10. Possible names of positions: the worker at geophysical works.
11. The profession "The worker at geophysical works" obliges the subject to know and be able to carry out the tasks connected with realization of the main function: auxillary operations when carrying out field geophysical surveys
Communication with the existing regulating documents is specified in Table 1 of Appendix 2 to this professional standard.
12. Requirements to working conditions, education and work experience of the worker at geophysical works are provided in Table 2 of Appendix 2 to this professional standard.
13. The list of units of the professional standard is specified in Table 3 of Appendix 2 to this professional standard.
14. The functional map describing units of the professional standard and the labor operations performed the worker at geophysical works is provided in Table 4 Appendix 2 to this professional standard.
15. Requirements to competences of the worker at geophysical works are specified in the Table 5, 6 Appendices 2 to this professional standard.
16. Qualification level on ORK - 3
17. Possible names of positions: driver of the logging station.
18. The profession "The driver of the logging station" obliges the subject to know and be able to carry out the tasks connected with realization of the main function: preparation of the elevator of the logging station and carrying out hoisting transactions of probes in wells.
Communication with the existing regulating documents is specified in Table 1 of Appendix 3 to this professional standard.
19. Requirements to working conditions, education and work experience of the driver of the logging station are provided in Table 2 of Appendix 3 to this professional standard.
20. The list of units of the professional standard is specified in Table 3 of Appendix 3 to this professional standard.
21. The functional card describing units of the professional standard and the labor actions run by the driver of the logging station in Table 4 Applications 3 to this professional standard.
22. Requirements to competences of the driver of the logging station are specified in the Table 5, 6 and 7 Appendices 3 to this professional standard.
16. Qualification level on ORK - 3-4
17. Possible names of positions: serviceman of the geophysical equipment.
18. The profession "The serviceman of the geophysical equipment" obliges the subject to know and be able to carry out the tasks connected with realization of the main function: repair, adjustment and setup of the analog geophysical equipment.
Communication with the existing regulating documents is specified in Table 1 of Appendix 4 to this professional standard.
19. Requirements to working conditions, education and work experience of the serviceman of the geophysical equipment are provided in Table 2 of Appendix 4 to this professional standard.
20. The list of units of the professional standard is specified in Table 3 of Appendix 4 to this professional standard.
21. The functional card describing units of the professional standard and the labor actions run by the serviceman of the geophysical equipment in Table 4 Applications 4 to this professional standard.
22. Requirements to competences of the serviceman of the geophysical equipment are specified in the Table 5, 6 Appendices 4 to this professional standard.
16. Qualification level on ORK - 3-4
17. Possible names of positions: logger.
18. The profession "Logger" obliges the subject to know and be able to carry out the tasks connected with realization of the main function: carrying out geophysical surveys of wells, including prostrelochno-explosive works.
Communication with the existing regulating documents is specified in Table 1 of Appendix 5 to this professional standard.
19. Requirements to working conditions, education and work experience of the logger are provided in Table 2 of Appendix 5 to this professional standard.
20. The list of units of the professional standard is specified in Table 3 of Appendix 5 to this professional standard.
21. The functional card describing units of the professional standard and the labor actions run by the logger in Table 4 Applications 5 to this professional standard.
22. Requirements to competences of the logger are specified in the Table 5, 6 Appendices 5 to this professional standard.
16. Qualification level on ORK - 3-4
17. Possible names of positions: laboratory assistant-radiometrist.
18. The profession of "Geofizik-radiometrist" obliges the subject to know and be able to carry out the tasks connected with realization of the main function: carrying out radiometric researches.
Communication with the existing regulating documents is specified in Table 1 of Appendix 6 to this professional standard.
19. Requirements to working conditions, education and work experience of geophysics-radiometrista are provided in Table 2 of Appendix 6 to this professional standard.
20. The list of units of the professional standard is specified in Table 3 of Appendix 6 to this professional standard.
21. The functional card describing units of the professional standard and the labor actions run the geophysicist-radiometristom in Table 4 Applications 6 to this professional standard.
22. Requirements to competences of geophysics-radiometrista are specified in the Table 5, 6 Appendices 6 to this professional standard.
16. Qualification level on ORK - 4
17. Possible names of positions: technician-geophysicist.
18. The profession "Technician-geophysicist" obliges the subject to know and be able to carry out the tasks connected with realization of the main function: carrying out field geophysical surveys, cameral processing of field data.
Communication with the existing regulating documents is specified in Table 1 of Appendix 6 to this professional standard.
19. Requirements to working conditions, education and work experience the technician geophysics are provided in Table 2 of Appendix 7 to this professional standard.
20. The list of units of the professional standard is specified in Table 3 of Appendix 7 to this professional standard.
21. The functional card describing units of the professional standard and the labor actions run the technician-geophysicist in Table 4 Applications 7 to this professional standard.
22. Requirements to competences the technician geophysics are specified in Table 5 of Appendix 6 to this professional standard.
Personnel Recruitment Center Career-Holdings LLP
|
Name of the organization |
Date of coordination |
|
Industry council on development of technical and professional education and training of the Ministry of the industry and new technologies of the Republic of Kazakhstan |
|
This professional standard is registered ____________________________________________________
______________________________________________________________________________________________________
It is entered in the Register of professional standards reg. No. ____________
Letter (protocol) No. ___________ Date ________________
to the Professional standard "Geophysical Methods of Search and Investigation of Mineral Deposits"
Types of activity, professions, qualification levels
|
No. of payment order |
Name of type of activity |
The name of profession taking into account labor market tendencies |
The name of profession according to the state qualifier of occupations of the Republic of Kazakhstan 01-2005 |
ORK qualification level |
|
1. |
Auxillary operations when carrying out field geophysical surveys |
The worker at geophysical works |
The worker at geophysical works |
1-2 |
|
2. |
Preparation of the elevator of the logging station and carrying out hoisting transactions of probes in wells |
Driver of the logging station |
Driver of the logging station |
3 |
|
3 |
Repair, adjustment and setup of the analog geophysical equipment |
Serviceman of the geophysical equipment |
Serviceman of the geophysical equipment |
3-4 |
|
4 |
Carrying out geophysical surveys of wells, including prostrelochno-explosive works |
logger |
Logger |
3-4 |
|
5 |
Carrying out radiometric researches |
Geofizik-radiometrist |
Laborant-radiometrist |
3-4 |
|
6 |
Carrying out field geophysical surveys, cameral processing of field data |
Technician-geophysicist |
Technician-geophysicist |
4 |
to the Professional standard "Geophysical Methods of Search and Investigation of Mineral Deposits"
The worker at geophysical works
Table 1. Communication with the existing regulating documents:
|
State qualifier of occupations of the Republic of Kazakhstan (GKZ) | |
|
Basic group |
7610. Professions of the workers occupied at exploration works |
|
Single wage rate book of works and professions of working (ETKS) | |
|
Release, Section ETKS |
Release 5, Section 2 Exploration and land works of April 9, 2012 No. 124-? - m |
|
Profession on ETKS |
The worker at geophysical works |
|
Qualification ORK level |
Categories on ETKS |
|
1-2 |
2-4 |
Table 2. Requirements to working conditions, education and work experience
|
Possible places of employment in (the companies, the organizations) |
The companies/organizations rendering geological services for various industries of economy (oil and gas, mining, construction of engineering constructions, ecology, etc.) | ||
|
Harmful and dangerous working conditions |
Field working conditions. Raising of weights, the lowered or increased air temperature and humidity, sunlight, content (allocation) of hazardous substances in materials or tests | ||
|
Special conditions of the admission to work |
According to the Legislation of RK | ||
|
ORK qualification level |
Level of professional education and training |
Required work experience | |
|
1 |
Short-term rates or training at the company in the presence of general secondary education |
It is not required | |
|
2 |
The established skill level of technical and professional education and practical experience of work |
1 year at 1 level | |
|
|
|
|
|
Table 3. List of units of the professional standard (labor functions of profession)
|
No. of labor function |
Name of labor function (unit of the professional standard) |
|
1 |
Preparation of watch system and equipment for geophysical works |
|
2 |
Carrying out field works as land, borehole and underground geophysical methods of researches. |
|
3 |
Dismantle of the equipment and mitigation of consequences of field works |
Table 4. Description of units of the professional standard (functional card)
|
No. of labor function |
Objects of the labor |
Labor instruments |
Tasks (labor actions) |
|
1 |
Geophysical equipment and devices, shantsevy tool |
Schemes of packaging, transportation of the geophysical equipment and its arrangement on place of employment |
1-1) Participation in loading of the geophysical equipment, its transportation to work location and unloading in the place of arrival. Preparation of platforms and places of parking for the equipment. |
|
Conventional signs (pegs, landmarks), roulette. |
Schemes and plans of carrying out geophysical works |
1-2) Marking privyazochnye works - transferring on the area of project provision of profiles and points of registration and radiators, and also subjects to geophysical observations. | |
|
Geophysical devices (sensors) of registration and radiators of physical fields, logging cable, wires of the line of communications, seismic, electroprospecting and auxiliary lines. |
Tools (passatizh, screw-drivers, etc.), instrumentations (testers, ohmmeters) |
1-3) Participation in installation and preparation of the geophysical equipment, equipment and devices to field works (preventive maintenance and repair, connection to power supplies). | |
|
2 |
Geophysical devices of registration and radiators of physical fields, wires of the line of communications, seismic, electroprospecting and auxiliary lines. |
Technique of field works and scheme of observations of the geophysical field |
2-1) Arrangement of devices of registration and radiators of the physical field on profile and connection them to connecting lines. Quality check of their arrangement and connection. Transfer of devices of registration and radiators of the physical field and connecting lines in the course of works |
|
2-2) Installation in the mouth of well of devices and devices. Participation in accomplishment of borehole geophysical works (logging) | |||
|
2-3) Preparation of points of observations in excavations (drilling of shots, cleaning of platforms). Installation of devices of registration and radiators of the physical field in points of observations and their connection to connecting lines. Transfer of devices of registration, radiators and connecting lines in the course of works | |||
|
3 |
Geophysical equipment |
Scheme of curtailment of geophysical works |
3-1) Dismantle of the geophysical equipment and devices, their preparation for transportation |
|
Places of parking, measurements and explosion (wells, shots) |
Scheme of liquidation, shantsevy tool |
3-2) Liquidation of platforms and places of parking of the geophysical equipment, consequences of drilling-and-blasting works during the seismic works. | |
|
Geophysical devices (sensors), equipment, stations |
Scheme of transportation of GF of the equipment |
3-3) Loading of GF of the equipment |
Table 5. Requirements to competences of the worker at geophysical works of the 1st ORK level
|
task No. |
Personal and professional competences |
Skills |
Knowledge |
|
1-1) 2-1) 3-1) 3-2) |
The performing sales activity of regulation under the direction of assuming the limited liability and certain degree of independence in realization of processes of preparation of platforms and carrying out land geophysical surveys and completion of geophysical works. |
Practical skills of handling works Skills of practical work with the metalwork tool Be able to give first aid |
Service regulations, transportation and storages of the geophysical equipment, devices and the equipment, the main working methods with the replacement tool. The main working methods with the metalwork tool, Industrial safety rule and safe engineering when carrying out geophysical works |
Table 6. Requirements to competences of the worker at geophysical works of the 2nd ORK level
|
task No. |
Personal and professional competences |
Skills |
Knowledge |
|
1-2) 1-3) |
The performing sales activity of regulation under the direction of providing independent planning, responsibility for accomplishment of objectives in realization of processes of carrying out land geophysical surveys |
Skills in work with topographic maps and plans of mining operations, carrying out measurements of distances on the area by means of geodetic devices Skills of practical work with the metalwork tool, instrumentations. Practical experience of determination of defect in electric chains (lines). |
Know technological instructions of cleaning of mouth of slag, torkretirovaniye of fire-resistant laying of the converter, seal of the outlet, hot repair of the converter, etc. |
|
2-2) 2-3) |
The performing sales activity of regulation under the direction of providing independent planning, responsibility for accomplishment of objectives in realization of processes of carrying out borehole and underground geophysical surveys |
Orientation in excavations. Practical skills of work with the hand mountain boring tool |
Know technological instructions. |
to the Professional standard "Geophysical Methods of Search and Investigation of Mineral Deposits"
Driver of the logging station
Table 1. Communication with the existing regulating documents:
|
State qualifier of occupations of the Republic of Kazakhstan (GKZ) | |
|
Basic group |
7610. Professions of the workers occupied at exploration works |
|
Single wage rate book of works and professions of working (ETKS) | |
|
Release, Section ETKS |
Release 5, Section 2 Exploration and land works of April 9, 2012 No. 124-? - m (MYU No. 7611 of 2.05.2012) |
|
Profession on ETKS |
Driver of the logging station |
|
ORK qualification level |
Categories on ETKS |
|
3 |
2-5 |
Table 2. Requirements to working conditions, education and work experience
|
Possible places of employment in (the companies, the organizations) |
The companies/organizations rendering geological services for various industries of economy (oil and gas, mining, construction of engineering constructions, ecology, etc.) | ||
|
Harmful and dangerous working conditions |
Field working conditions. Raising of weights, the lowered or increased air temperature and humidity, sunlight, work with the ionizing sources, content (allocation) of hazardous substances in materials or tests | ||
|
Special conditions of the admission to work |
According to the Legislation of RK | ||
|
ORK qualification level |
Level of professional education and training |
Required work experience | |
|
3 |
The established skill level of technical and professional education and practical experience of work |
1 year at the 2nd "The Worker at Geophysical Works" level | |
|
|
|
|
|
Table 3. List of units of the professional standard (labor functions of profession)
|
№ labor function |
Name of labor function (unit of the professional standard) |
|
1 |
Preparation of the borehole equipment for geophysical surveys |
|
2 |
Carrying out field borehole geophysical methods of researches. |
|
3 |
Dismantle of the borehole geophysical equipment and mitigation of consequences of field works |
Table 4. Description of units of the professional standard (functional card)
|
No. of labor function |
Objects of the labor |
Labor instruments |
Tasks (labor actions) |
|
1 |
Borehole geophysical equipment, equipment, devices and equipment. |
The logging station with the elevator. |
1-1) Loading, unloading and transportation of the equipment, equipment and tool. Preparation of stations and elevators for transportation. |
|
1-2) The choice and preparation of the platform for the logging station. Installation of laboratory, generating group and elevator. | |||
|
1-3) Preparation logging stations and elevators to carrying out geophysical surveys. | |||
|
2 |
Borehole geophysical equipment, equipment, devices and equipment. |
Technique and technology of carrying out borehole geophysical surveys |
2-1) Management of the logging station and elevator when carrying out geophysical surveys and prostrelochno-explosive works in wells up to 1000 meters in depth. Descent of the equipment (devices) in well and their rise. |
|
2-1). Management of the logging station and elevator when carrying out geophysical surveys and prostrelochno-explosive works in wells of 4000 in depth to over 1000 of meters. Descent of the equipment (devices) in well and their rise. | |||
|
2-3) Management of the logging station and elevator when carrying out geophysical surveys and prostrelochno-explosive works in wells over 5000 meters in depth. Descent of the equipment (devices) in well and their rise. | |||
|
3 |
Borehole geophysical equipment, equipment, devices and equipment. |
The logging station with the elevator. |
3-1) Dismantle of the borehole equipment and preparation of the logging station and the elevator to transportation. |
|
3-2) Accomplishment on a shift basis and participation in planned maintenance and running repair of stations, laboratories, elevators, winch, internal combustion engines and generators, change of electrolyte and accumulator charging. |
Table 5. Requirements to competences of the driver of the logging station of the 3rd ORK level
|
task No. |
Personal and professional competences |
Skills |
Knowledge |
|
1-1) 1-1) 1-3) 3-1) 3-2) |
The performing sales activity of tasks under the direction of assuming the limited liability and certain degree of independence in realization of function on carrying out borehole geophysical surveys |
Practical skills of handling works. Ability to work with the borehole geophysical equipment. Main acceptances of installation of electric chains Fulfillment of requirements of labor protection and safe engineering, fire safety and regulations. Accomplishment of sanitary actions on workplace and in production zone, Rendering the pre-medical help in case of accidents. |
Rules and modes of accumulator charging, device of grounding and methods of finding of damages to network, signs of defects of petrolengines, generator and auxiliary mechanisms of stations and methods of their elimination. Rules of carrying out on a shift basis and planned maintenance and running repair of the equipment of logging stations, types and technical characteristics of the equipment, equipment, generator and stations, brands of cables and wires, electrical equipment bases, procedure and rules of carrying out explosive works |
|
2-1) 2-2) 2-3) |
The performing sales activity of tasks under the direction of assuming the limited liability and certain degree of independence in realization of function on carrying out borehole geophysical surveys |
Practical skills of work with instrumentations and equipment, soldering iron and other replacement tools. |
Designs of wells, procedure for carrying out geophysical surveys in wells, rules of descent and raising of devices, rules of transportation of the logging and perforating equipment and the equipment, their device and service regulations, |
to the Professional standard "Geophysical Methods of Search and Investigation of Mineral Deposits"
Serviceman of the geophysical equipment
Table 1. Communication with the existing regulating documents:
|
State qualifier of occupations of the Republic of Kazakhstan (GKZ) | |
|
Basic group |
7610. Professions of the workers occupied at exploration works |
|
Single wage rate book of works and professions of working (ETKS) | |
|
Release, Section ETKS |
Release 5, the Section Exploration and land works of April 9, 2012 No. 124-? - m (MYU 7611 of 2.05.2013) |
|
Profession on ETKS |
Serviceman of the geophysical equipment |
|
Qualification ORK level |
Categories on ETKS |
|
3 |
5 |
|
4 |
6-7 |
Table 2. Requirements to working conditions, education and work experience
|
Possible places of employment by profession (companies, organizations) |
The companies/organizations rendering geological services for various industries of economy (oil and gas, mining, construction of engineering constructions, ecology, etc.) | ||
|
Harmful and dangerous working conditions |
Field working conditions. Raising of weights, the lowered or increased air temperature and humidity, sunlight, content (allocation) of hazardous substances in materials or tests | ||
|
Special conditions of the admission to work |
According to the Legislation of RK | ||
|
Qualification ORK level |
Level of professional education and training |
Required work experience | |
|
3 |
The established skill level of technical and professional education and practical experience of work or the increased skill level of technical and professional education without practical experience of work. |
It is not required | |
|
4 |
The increased skill level of technical and professional education and practical experience of work or qualification of the specialist of average link without practical experience of work. |
1 year at the 3rd level | |
|
|
|
|
|
Table 3. List of units of the professional standard (labor functions of profession)
|
No. of labor function |
Name of labor function (unit of the professional standard) |
|
1 |
Installation and preparation of the geophysical equipment, devices and the equipment to field works |
|
2 |
Repair and adjustment of the geophysical equipment in the course of field works |
|
3 |
Dismantle of the geophysical equipment, devices and the equipment and preparation them to transportation |
Table 4. Description of units of the professional standard (functional card)
|
No. of labor function |
Objects of the labor |
Labor instruments |
Tasks (labor actions) |
|
1 |
Geophysical equipment, devices and equipment |
Instrumentations, metalwork tool. |
1-1) Accomplishment of planned maintenance on stationary bases of the organizations. |
|
1-2) Carrying out the running unplanned repair of the geophysical equipment, equipment, devices and separate nodes on field bases (production site of works). | |||
|
1-3) Assembly, dismantle, adjustment, regulation and testing of the small geophysical equipment, equipment and devices. | |||
|
1-4) Adjustment and repair of analog seismic, electroprospecting, logging, gas-logging and other geophysical stations, gravity meters, gravitational variometers, aero magnetometers, potentiometers, seismoreceivers and other geophysical devices, equipment and devices. | |||
|
1-5) Adjustment and repair of geophysical devices, the equipment and devices with digital registration. | |||
|
1-6) Assembly, dismantle, adjustment, adjustment, testing and calibration of the geophysical equipment, equipment and devices. | |||
|
2 |
Geophysical equipment, devices and equipment |
Instrumentations, soldering iron, tweezers, metalwork tool. |
2-1) Installation and preparation of the analog geophysical equipment, devices and the equipment to field works for land geophysical surveys |
|
2-2) Installation and preparation of the analog geophysical equipment, devices and the equipment to field works for borehole geophysical surveys | |||
|
2-3) Installation and preparation of the analog geophysical equipment, devices and the equipment to field works for underground geophysical surveys | |||
|
2-4) Repair and adjustment of the digital land geophysical equipment in the course of field works | |||
|
2-5) Repair and adjustment of the digital borehole geophysical equipment in the course of field works | |||
|
2-6) Repair and adjustment of the digital underground geophysical equipment in the course of field works | |||
|
2-7) Repair and adjustment of the digital sea geophysical equipment in the course of field works | |||
|
2-8) Repair and adjustment digital aero - the geophysical equipment in the course of field works | |||
|
3 |
Geophysical equipment, devices and equipment |
Scheme of dismantle of the geophysical equipment, metalwork tool |
3-1) Dismantle of the geophysical equipment, devices and the equipment and preparation them to transportation after the land geophysical surveys |
|
3-2) Dismantle of the geophysical equipment, devices and the equipment and preparation them to transportation after the borehole geophysical surveys | |||
|
3-3) Dismantle of the geophysical equipment, devices and the equipment and preparation them to transportation after the underground geophysical surveys |
Table 5. Requirements to competences of the serviceman of the geophysical equipment of the 3rd ORK level
|
task No. |
Personal and professional competences |
Skills |
Knowledge |
|
1-1) 1-2) 1-3) 2-1) 2-2) 2-3) 3-1) 3-2) 3-3) |
The performing sales activity of regulation under the direction of providing independent planning, responsibility for accomplishment of objectives in realization of processes of preparation of technical and other supportive applications of geophysical surveys and completion of geophysical works |
Practical skills of work with instrumentations and equipment, soldering iron and other replacement tools. Main acceptances of installation of electric chains Practical skills of work with the geophysical equipment, devices and the equipment used in case of land geophysical surveys |
Bases of electro-and radio engineering, electronics; schematic electric and radio schemes. Service regulations, transportations and storages geophysical the equipment, the equipment and devices used in case of land, borehole and underground geophysical surveys. Main data on tasks and technique of land geophysical works. |
Table 6. Requirements to competences of the serviceman of the geophysical equipment of the 4th ORK level
|
task No. |
Personal and professional competences |
Skills |
Knowledge |
|
1-1) 1-4) 1-5) 1-6) 2-4) 2-5) 2-6) 2-7) 2-8) |
The performing management activity on realization of regulation under the direction of providing independent determination of tasks, the organization and control of realization of regulation by subordinate workers, responsibility for result in case of realization of support functions of repair, adjustment, adjustment and calibration of the geophysical equipment and their preparation for field works. |
Practical skills in case of dismantle and assembly of the geophysical equipment, the equipment and devices, rules and technology of maintenance, repair. Adjustments and adjustments of the geophysical equipment and its separate nodes, methods of accomplishment of plumbing. |
Bases of electro-and radio engineering, schematic electric and radio schemes, technologies and rules of adjustment, adjustment, calibration, repair of geophysical devices, equipment, devices and their complexes. Bases of repair and adjustment of ATsP (analog digitizers) and DTAC (digital-to-analog converters); types, device, procedure, methods of dismantle and assembly of geophysical stations, devices, equipment and other devices. |
to the Professional standard "Geophysical Methods of Search and Investigation of Mineral Deposits"
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.
The document ceased to be valid since February 14, 2023 according to Item 1 of the Order of the Minister of the industry and infrastructure development of the Republic of Kazakhstan of January 30, 2023 No. 60