Document from CIS Legislation database © 2003-2025 SojuzPravoInform LLC

DECISION OF BOARD OF THE EURASIAN ECONOMIC COMMISSION

of November 18, 2013 No. 265

About approval of single form of the certificate on type of products meeting the requirements of the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013), and rules of its registration

(as amended of the Decision of Board of the Eurasian economic commission of 15.11.2016 No. 153)

According to the paragraph the eighth Item 5 of the Protocol on technical regulation within the Eurasian Economic Union (appendix No. 9 to the Agreement on the Eurasian Economic Union of May 29, 2014) and the Decision of Council of the Eurasian economic commission of July 2, 2013 "About the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" Board of the Eurasian economic commission solved No. 41:

1. Approve enclosed single form of the certificate on type of products meeting the requirements of the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013), and rules of its registration.

2. This Decision becomes effective after 30 calendar days from the date of its official publication.

Chairman of Board of the Eurasian economic commission

V. Khristenko

Approved by the Decision of Board of the Eurasian economic commission of November 18, 2013 No. 265 (in edition of the Decision of Board of the Eurasian economic commission of November 15, 2016 No. 153)

Single form of the certificate on type of products meeting the requirements of the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013), and rules of its registration

I. Single form of the certificate on type of products meeting the requirements of the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013)

153 Рис 1

 

II. Rules of execution of the certificate on type of products meeting the requirements of the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013)

1. The certificate on type of products meeting the requirements of the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013) accepted by the Decision of Council of the Eurasian economic commission of July 2, 2013 No. 41 (further – the certificate), is issued to the applicant by the certification body included in the unified register of conformity assessment bodies of the Eurasian Economic Union.

2. Can be applicants registered according to the legislation of state member of the Eurasian Economic Union (further – state member) in its territory the legal entity or physical person as the individual entrepreneur which are the manufacturer or person authorized by the manufacturer (further – applicants).

3. The certificate and appendices to it are made on sheets of white paper of the A4 format (210 x 297 mm).

4. The certificate is filled in in Russian with use of electronic printers and in case of availability of the relevant requirement in the legislation of state member – in state language of state member in which issue of the certificate is performed.

In case of filling of the certificate in Russian and state language of one of state members it is filled according to Item 7 of this Section on the different parties of the certificate.

5. If necessary the name of the manufacturer, its location (the address of the legal entity), and also the address (addresses) of the place of implementation of activities for production of products (except state) and designation of products (type, brand, model, the article, etc.) can be specified with use of letters of the Latin alphabet.

6. All fields of the certificate shall be filled (in the original certificate numbering of fields is absent).

7. In the certificate are specified:

a) in the field 1 – the texts executed in 5 lines in the following sequence:

1st line - "EURASIAN ECONOMIC UNION";

The 2nd line – "The CERTIFICATE ON PRODUCTS TYPE,";

3rd line – "meeting the requirements of the technical regulation";

The 4th line – "About Safety of the Equipment custom union;

The 5th line – "working under excessive pressure" (TR CU 032/2013)";

b) in the field 2 – registration certificate number which is created according to the legislation of state member with indication of abbreviation of EEU (Eurasian Economic Union) and 2-unit alphabetic code of state member according to the qualifier of the countries of the world;

c) in the field 3 – full name of the applicant, its location (the address of the legal entity) and the address (addresses) of the place of implementation of activities (if addresses differ) – for the legal entity or surname, name and middle name (in the presence), the residence and the address (addresses) of the place of implementation of activities (if addresses differ) – for the physical person registered as the individual entrepreneur, and also registration or accounting (individual, identification) number of the applicant assigned in case of state registration of the legal entity or physical person registered as the individual entrepreneur according to the legislation of state members, phone number and the e-mail address;

d) in the field 4 – full name of the manufacturer, its location (the address of the legal entity) and the address (addresses) of the place of implementation of activities for production of products (if addresses differ) – for the legal entity and his branches which make products or surname, name and middle name (in the presence), the residence and the address (addresses) of the place of implementation of activities for production of products (if addresses differ) – for the physical person registered as the individual entrepreneur;

e) in the field 5 – data on standard product sample according to which the research of the corresponding type of products was conducted:

name of standard product sample;

the data providing identification of standard product sample (type, brand, model, the article, working pressure, working temperature (the range of temperatures), working environment, fuel type (for coppers), classification of the equipment by categories of danger according to appendix No. 1 to the technical regulation of the Customs union "About safety of the equipment working under excessive pressure" (TR CU 032/2013));

the name and designation of the document (documents) according to which the standard product sample (the standard, the standard of the organization, specifications or other document) is made (in the presence);

other data on standard product sample provided by the applicant;

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SoyuzPravoInform LLC.