Registered by the
Ministry of Justice
Republic of Uzbekistan
On October 11, 2013 No. 2516
of September 18, 2013 No. 439
About approval of Rules of payment for work and services in National system of certification of the Republic of Uzbekistan
In pursuance of the resolution of the Cabinet of Ministers of the Republic of Uzbekistan of April 19, 2013 to No. 108 "About introduction of amendments to the resolution of the Cabinet of Ministers of July 6, 2004 No. 318 "About additional measures for simplification of the procedure of certification of products, I order:
1. Approve Rules of payment for work and services in National system of certification of the Republic of Uzbekistan according to appendix.
2. Declare invalid the Payment procedure of works approved by the Uzbek state center of standardization, metrology and certification on April 28, 1999 (reg. No. 722 of May 11, 1999).
3. This Order becomes effective from the date of its official publication.
CEO
A. Kurbanov
Appendix
to the Order of the CEO of the Uzbek agency of standardization, metrology and certification of the Republic of Uzbekistan of September 18, 2013 No. 439
These rules according to the laws of the Republic of Uzbekistan "About certification of products and services", "About assessment of conformity", the resolution of the President of the Republic of Uzbekistan of August 15, 2019 No. PP-4419 "About further enhancement of conformity assessment system and development of complex of test laboratories in the Republic of Uzbekistan", resolutions of the Cabinet of Ministers of the Republic of Uzbekistan of April 19, 2013 No. 108 "About introduction of amendments to the resolution of the Cabinet of Ministers of July 6, 2004 No. 318 "About additional measures for simplification of the procedure of certification of products", of October 14, 2015 No. 292 "About measures for implementation of the Law of the Republic of Uzbekistan "About assessment of conformity", of April 24, 2019 No. 348 "About measures for further enhancement of activities of the Uzbek agency of standardization, metrology and certification" and of April 24, 2019 No. 349 "About additional measures for enhancement of works in the field of accreditation of conformity assessment bodies" is established by payment procedure of works and services in accreditation, inspection check-up, certification, recognition of the certificates of conformity issued by conformity assessment bodies of foreign countries, declarations of conformity and test reports, and also lump one-time sum payment for use of mark of conformity and payment for applications of sign of national accreditation system (further in the text - accreditation sign).
1. In these rules the following basic concepts are applied:
object of accreditation - conformity assessment bodies and metrological services, including in the course of their assessment;
mark of conformity - the sign registered in accordance with the established procedure which marks products or documentation on services, for specifying of the fact that these products or service conform to the specific standard or other regulating document;
inspection check-up - the procedure of periodic repeated assessment of products, production processes, services, systems of management, conformity assessment bodies performed for the purpose of confirmation of conformity to their requirements established during assessment of conformity.
1-1. Conformity assessment bodies and metrological services perform the activities based on certificates on accreditation.
2. The cost of works and services in National system of certification of the Republic of Uzbekistan is determined on contractual basis. At the same time determination of structure of costs when forming cost of works and services in accreditation, inspection check-up, certification, recognition of foreign certificates and to declaring is performed according to the resolution of the Cabinet of Ministers of the Republic of Uzbekistan of February 5, 1999 No. 54 "About approval of the Regulations on structure of costs on production and sales of products (works, services) and about procedure for forming of financial results.
3. The cost of works and services of enterprise monopolists and subjects of natural monopoly is determined by accreditation, inspection check-up, certification, recognition of foreign certificates and declaring according to Regulations on procedure for forming, declaring (approval) and establishment of regulated prices (rates) for goods (works, services) and the state control of their application approved by the resolution of the Cabinet of Ministers of the Republic of Uzbekistan of October 28, 2010 No. 239.
4. According to Item 60 of the Regulations on procedure for the carrying out accreditation of conformity assessment bodies approved by the resolution of the Cabinet of Ministers of April 24, 2019 No. 349, SUE The Center for Accreditation under the Uzbek Agency of Standardization, Metrology and Certification (further in the text - the Center) the payment for the following services in the field of accreditation is levied:
examination of documents;
assessment of object of accreditation;
the inspection check-up of object of accreditation which is carried out according to the approved scheduled plan;
updating of area of accreditation.
5. All expenses connected with work on accreditation irrespective of their results are subject to payment.
6. According to article 5 of the Law of the Republic of Uzbekistan "About certification of products and services" the Uzbek technical regulation agency under the Ministry of investments and foreign trade of the Republic of Uzbekistan (further - technical regulation Agency) has the right to delegate part of the functions to certification bodies of products and test laboratories (centers).
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.