Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

It is registered

Ministry of Justice of Ukraine

 September 24, 2013

No. 1639/24171

DECISION OF THE NATIONAL COMMISSION ON SECURITIES AND STOCK MARKET OF UKRAINE

of September 3, 2013 No. 1681

About approval of the Regulations on requirements to standard (standard) form of production of bill forms

(as amended on 21-12-2017)

According to Item 13 of article 8 of the Law of Ukraine "About state regulation of the security market in Ukraine", article 5 of the Law of Ukraine "About the circulation of bills of exchange in Ukraine" the National commission on securities and the stock market RESHILA:

1. Approve Regulations on requirements to standard (standard) form of production of bill forms which is applied.

2. Declare invalid the decision of State commission on securities and the stock market of November 22, 2001 No. 338 "About approval of the Regulations on requirements to standard (standard) form of production of bill forms", registered in the Ministry of Justice of Ukraine on April 11, 2002 on No. 360/6648.

3. Distribution of bill forms between legal entities and physical persons is performed by the National Bank of Ukraine and banks.

4. Use of bill forms for which complex system of protection the holographic protective element is used to perform before their final use.

5. Corporate management department and corporate finances (A. Papaik) to provide submission of this decision on state registration in the Ministry of Justice of Ukraine.

6. To provide to management of information technologies, external and internal communications (A.Zaik):

promulgation of this decision on the official site of the National commission on securities and the stock market;

publication of this decision in the official printing publication of the National commission on securities and the stock market.

7. This decision becomes effective from the date of its official publication.

8. Control over the implementation of this decision to assign to the member of the National commission on securities and the stock market A. Petrashko.

 

Commission chairman

D. Tevelev

 

The minutes of the Commission of September 3, 2013 No. 44

The Decision of the National commission on securities and the stock market of Ukraine of September 3, 2013 is approved No. 1681

Regulations on requirements to standard (standard) form of production of bill forms

1. Bill forms of standard form are made two types: simple and translated.

2. Bill forms after cutting have the size of 297 x 105 mm. Admissions in sizes of fields and the sizes of bill forms on height and width constitute ± 1 mm, across Kosino - 1 mm.

Format of strip of set 15 x 5 squares.

Forms are fastened in blocks on 25 or on 50 copies by means of glue.

3. Bill forms in the text and arrangement of details shall correspond to forms of the samples given in appendices 1 and 2 to this Provision.

The font and size of font of the text shall be picked up so that the text was well read against the background of graphic design.

The reverse side of the NE bill form is sealed.

4. Bill forms shall contain the following basic data in the right bottom corner:

the complete, reduced or conditional names of the producer;

place and year of release;

order number;

circulation in copies.

5. Bill forms of one type shall have the end-to-end numbering executed by protective paint.

Numbering includes series from two letters and seven-digit number. Letters of series are installed separately for forms of simple and translated bills of exchange.

6. Bill forms of one appearance shall have identical design and be made using identical technologies and remedies:

1) promissory note:

with paint of blue color it is printed antiskanerny grid;

in the places intended for filling raster points are printed with paint of blue color;

paint of black color prints the line of the microtext "promissory note";

the paint which is not seen in case of daylight acquires green luminescence in case of action of UF-radiation, the words "promissory note" are printed;

for intaglio seals are executed by paint some graphical elements;

2) bill of exchange:

with paint of pink color it is printed antiskanerny grid;

in the places intended for filling raster points are printed with paint of pink color;

paint of black color prints the line of the microtext "bill of exchange";

the paint which is not seen in case of daylight acquires yellow luminescence in case of impact of UF-radiation, the words "bill of exchange" are printed;

for intaglio seals are executed by paint some graphical elements.

7. Bill forms on graphical and the color decision, shall correspond to printing execution approved as the customer subscription leaf.

Circulation of bill forms of one order shall be made on paper of one grade, the same printing paints.

8. The system of protection of bill forms against counterfeit shall include elements of protection of paper and elements of protection which are reached by use of special means of seal, special elements of design and special paints:

1) requirements to protection of paper for production of bill forms:

bill forms shall be made on special paper without optical bleach with a density of 100 g/m2 and contain at least 80% of fibers of cotton in structure;

paper shall have at least two different types of protective fibers which can be checked in visible or other zone of range;

paper shall have multi-color watermark which on quality and size shall be distinguished easily;

2) for printing of bill forms such special methods of seal can be used:

dry and damp offset printing;

Oryol offset printing;

toffee (iridescent) seal;

intaglio seal;

relief printing (numbering).

Farbovanist when printing bill forms - at least 4;

3) the design of bill forms, except other elements, shall include such graphical (shaped) elements of protection:

background protective gilyoshny and antiskanerny grids with size of positive lines of 50-70 microns, negative - 70-90 microns. Quantity of protective background grids - at least 2.

Use of one background two - quadricolour protective grid if it is executed with the Oryol separation of flowers is allowed.

The microtext mm, positive with size of the letters 0,25-0,3, or negative - mm 0,3-0,35;

4) for printing of bill forms at least two protective paints shall be used (fluorescent, phosphorescing, seen only in UV rays, magnetic, with certain properties in IK-zone of range, termokhromny or others).

 

Director of the department of corporate management and corporate finances

A. Papaika

 

Appendix 1

to Regulations on requirements to standard (standard) form of production of bill forms (Item 3)

Bill of exchange

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.