Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

DECISION OF BOARD OF THE EURASIAN ECONOMIC COMMISSION

of April 9, 2013 No. 81

About approval of form of the certificate of the Customs union on testing of load-lifting chains, steel ropes, textile ropes and tapes and rules of its registration

(as amended of the Decision of Board of the Evraziyisky economic commission of 05.11.2016 No. 152)

According to the paragraph the eighth Item 5 of the Protocol on technical regulation within the Eurasian Economic Union (appendix No. 9 to the Agreement on the Eurasian Economic Union of May 29, 2014) and the Decision of the Commission of the Customs union of October 18, 2011 N 823 "About adoption of the technical regulation of the Customs union "About safety of machines and the equipment" the Board of the Eurasian economic commission solved:

1. Approve the certificates of the Eurasian Economic Union on testing of load-lifting chains, steel ropes, textile ropes and tapes enclosed form and the rule of its registration.

2. This Decision becomes effective after 30 calendar days from the date of its official publication.

Chairman
V. B. Khristenko

Approved by the Decision of Board of the Eurasian economic commission of April 9, 2013 No. 81 (in edition of the Decision of Board of the Eurasian economic commission of November 15, 2016 No. 152)

Form of the certificate of the Eurasian Economic Union of testing of load-lifting chains, steel ropes, textile ropes and tapes and rule of its registration

I. Form of the certificate of the Eurasian Economic Union of testing of load-lifting chains, steel ropes, textile ropes and tapes

152 Рис 1

II. Rules of execution of the certificate of the Eurasian Economic Union about testing of load-lifting chains, steel ropes, textile ropes and tapes

1. The certificate of the Eurasian Economic Union on testing of load-lifting chains, steel ropes, textile ropes and tapes (further – the certificate) is drawn up by applicants as whom act registered according to the legislation of state member of the Eurasian Economic Union (further – state member) in its territory the legal entity or physical person as the individual entrepreneur which are the manufacturer authorized by the manufacturer person (for serially products and for lot of products) or the seller (for lot of products) (further – applicants).

2. Requirements to the certificate are established by paragraphs the second or seventh Item 13 of the Section "Hoisting machines" of appendix No. 2 to the technical regulation of the Customs union "About safety of machines and the equipment" (to TR CU 010/2011) accepted by the Decision of the Commission of the Customs union of October 18, 2011 No. 823.

3. The certificate is drawn up on sheets of white paper of the A4 format (210 x 297 mm).

4. The certificate is constituted in Russian with use of electronic printers and in case of availability of the relevant requirement in the legislation of state member – in state language of state member in which issue of the certificate is performed.

In case of creation of the certificate in Russian and state language of one of state members it is filled according to Item 7 of this Section on the different parties of the certificate.

5. If necessary the name of the manufacturer, its location (the address of the legal entity), and also the address (addresses) of the place of implementation of activities for production of products (except state) and information on products (the brand including the nominal size, design and data on material) can be specified with use of letters of the Latin alphabet.

6. All fields of the certificate shall be filled (in the original certificate numbering of fields is absent).

7. In the certificate are specified:

a) in the field 1 – the texts executed in 2 lines in the following sequence:

1st line - "EURASIAN ECONOMIC UNION";

2nd line - "CERTIFICATE";

b) in the field 2 – data on products on which the certificate is granted:

product name;

information providing identification of products (the brand including the nominal size, design and data on material);

the name and designation of the document (documents) according to which products (the standard, the standard of the organization, specifications or other document) are made (in the presence);

other data on products providing its identification, provided by requirements of the technical regulation of the Customs union;

c) in the field 3 – full name of the manufacturer, its location (the address of the legal entity) and the address (addresses) of the place of implementation of activities for production of products (if addresses differ) – for the legal entity and his branches which make products or surname, name and middle name (in the presence), the residence and the address (addresses) of the place of implementation of activities for production of products (if addresses differ) – for the physical person registered as the individual entrepreneur, phone number and the e-mail address;

d) in the field 4 – data on the used test methods;

e) in the field 5 – data on the minimum explosive or ultimate load;

e) in the field 6 – data on the documents confirming products compliance to requirements of the technical regulation of the Customs union (protocols of researches (testing) and measurements with indication of number, dates, names of test laboratory (center), registration number of the certificate of accreditation), and also about other documents submitted by the applicant as the proof of compliance of products to requirements of the technical regulation of the Customs union;

g) in the field 7 – the signature, surname, name and middle name (in the presence) the physical person registered as the individual entrepreneur, the head of the organization applicant or person of the organization applicant authorized according to the legislation of state member with putting down of seal of the applicant (if other is not established by the legislation of state member). Use of the facsimile instead of the signature is not allowed.

8. Entering into the certificate of the data which are not provided by this Section and also reducing words (except the commonly accepted designations and reducings) and any corrections of the text are not allowed.

9. Copies of the granted certificates are made by the applicant on sheets of white paper of the A4 format (210 x 297 mm), certified by seal (if other is not established by the legislation of state member) and the signature of the applicant or person of the organization applicant authorized according to the legislation of state member (with indication of the name and details of the authorizing document).

 

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.