RESOLUTION OF THE CABINET OF MINISTERS OF THE REPUBLIC OF UZBEKISTAN

of November 24, 2003 No. 530

About procedure for designation of the line of Frontier of the Republic of Uzbekistan with the adjacent states

According to the Law "About Frontier of the Republic of Uzbekistan", for the purpose of the organization of works on designation of the line of Frontier of the Republic of Uzbekistan with the adjacent countries the Cabinet of Ministers decides:

1. Determine that the line of Frontier is determined by international treaties and is designated on the area by system of the border markers including the main (boundary post), additional and auxiliary (barrows, buoys, milestones, stvorny and others) signs.

2. Determine that:

the main border marker symbolizes immunity of Frontier, sovereignty, territorial integrity of the country and is established at check points, places of transition of Frontier with overland on river (lake, sea) sites, on joint of borders of three states and in other characteristic points of passing of the line of Frontier;

additional border markers are established for designation on the area of the line of passing of Frontier between the main border markers;

auxiliary border markers are applied to designation of passing of the line of Frontier of the Republic of Uzbekistan on certain remote onshore sections of the area and on surface of the water of the rivers, lakes and other reservoirs;

the main, additional and auxiliary border markers are property of the Republic of Uzbekistan.

3. Approve the description of the main border marker of the Republic of Uzbekistan according to appendix.

Determine that forms and the sizes are additional:

auxiliary border markers, stvorny signs, buoys and ve affirm the intergovernmental commissions on demarcation.

4. Determine that:

border markers of the Republic of Uzbekistan are established on the line of Frontier, with exact determination of their geographical coordinates and creation of the protocol of the Intergovernmental commission on demarcation. Border markers shall be clearly visible, strong and durable;

after installation border markers are transferred in the procedure determined by the legislation to border troops of Service of state security which provides their protection and the subsequent content.

5. To impose control over the implementation of this resolution on the Prime Minister of the Republic of Uzbekistan Sultanov U. T.

Appendix

to the resolution of the Cabinet of Ministers of the Republic of Uzbekistan of November 24, 2003 No. 530

Description of the main border marker of the Republic of Uzbekistan

The main border marker of the Republic of Uzbekistan established in case of demarcation of Frontier of the Republic of Uzbekistan with the adjacent states represents steel concrete rectangular design with the cross section of 18x22 cm, 265 cm high and tetrahedral pyramidal form in the upper part. After installation of border marker in soil its design represents column 200 cm high, the base and blind area.

The main border marker on all height of column is painted in the colors corresponding to National flag of the Republic of Uzbekistan.

On the main border marker of the Republic of Uzbekistan the State Emblem of the Republic of Uzbekistan is established and the sequence number (the Arab figures) of this sign is put.

The image of the State Emblem of the Republic of Uzbekistan is carried out on metal plate of 22x22 cm in size by stamping method. The State Emblem is established on the wide side of the main border marker turned towards the adjacent state at height (on the lower edge of plate) 165 cm from blind area level.

Figures of number 10 cm high are applied with white enamel paint on blue background with arrangement of figures on 5 cm below plate with the image of the State Emblem. (Number of the corresponding main border marker is specified also on additional border markers which number is put down in the form of fractional number where in numerator number of the main border marker and in denominator - own sequence number of this additional sign is specified.)

Except the image of the State Emblem and sequence number on the main border markers of other designations it is not provided.

The border marker shall be clearly visible, strong and durable. Installation of sign shall be made on depth at least 65 cm on the solid (dense) soil excluding sag of the soil, with work on consolidation and fixing with area steel concrete at the basis of border marker, guaranteeing long-term safety and reliable protection against destruction or loss as a result of impact of the person or forces of nature (floods, landslides, avalanches).

Installation of border markers in places with collapsible soil and quicksands is forbidden. In case of development of technological schemes on installation of border markers in the desert and sand area consolidation of subfoundation and carrying out antierosion processes is without fail provided (stacking of crushed stone, the turf, etc.).

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info