Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

LAW OF TURKMENISTAN

of October 19, 2012 No. 342-IV

About ensuring unity of measurements

(as amended of the Law of Turkmenistan of 05.06.2021)

This Law establishes the legal basis of ensuring unity of measurements in Turkmenistan

Chapter 1. General provisions

Article 1. The basic concepts used in this Law

For the purposes of this Law the following basic concepts are used:

1) unity of measurements - condition of measurements in case of which results of measurements are expressed in terms of the sizes allowed to application in Turkmenistan and errors of measurements are in the established borders with the set probability;

2) ensuring unity of measurements - the activities directed to achievement and maintenance of unity of measurements according to this Law;

3) units of sizes - the fixed values of the sizes accepted for unit of these sizes applied to quantitative expression of sizes, uniform with them;

4) checking of measuring instruments (further - checking) - set of the transactions which are carried out for the purpose of confirmation of conformity of measuring instruments to metrological requirements;

5) calibration of measuring instruments - (further - calibration) - set of the transactions which are carried out for determination of the valid values of metrological characteristics of measuring instruments;

6) metrological certification of measuring instruments and standard obraztsovissledovaniye of measuring instruments and standard samples for determination of their suitability to application.

Article 2. The legislation of Turkmenistan in the field of ensuring unity of measurements

1. The legislation of Turkmenistan in the field of ensuring unity of measurements is based on the Constitution of Turkmenistan and consists of this Law and other regulatory legal acts of Turkmenistan.

2. If the international treaty of Turkmenistan establishes other rules than containing in this Law, then rules of the international treaty are applied.

Article 3. Regulating documents on ensuring unity of measurements

1. Regulating documents on ensuring unity of measurements (further - regulating documents) are developed and affirm according to the legislation of Turkmenistan.

2. The regulating documents establishing metrological regulations and rules are binding in the territory of Turkmenistan.

Article 4. Financing of activities in the field of ensuring unity of measurements

Sources of financing of activities in the field of ensuring unity of measurements are:

1) the means of physical persons and legal entities arriving from provision of the paid services rendered by authorized body;

2) other means which are not forbidden by the legislation of Turkmenistan.

Chapter 2. The state control and supervision in the field of ensuring unity of measurements

Article 5. The bodies exercising the state control and supervision in the field of ensuring unity of measurements

The state control and supervision in the field of ensuring unity of measurements (further - metrological control and supervision) are performed by the Cabinet of Ministers of Turkmenistan, authorized body, other public authorities within their competence.

Article 6. Competence of the Cabinet of Ministers of Turkmenistan

Cabinet of Ministers of Turkmenistan:

1) determines single state policy in the field of ensuring unity of measurements;

2) publishes regulatory legal acts of Turkmenistan in the field of ensuring unity of measurements;

3) is determined by authorized body;

4) will be organized by interaction of authorized body, other public authorities in the field of ensuring unity of measurements;

5) approves programs of international cooperation in the field of ensuring unity of measurements;

6) performs other functions referred to its competence by the legislation of Turkmenistan in the field of ensuring unity of measurements.

Article 7. Competence of authorized body

Authorized body:

1) realizes single state policy in the field of ensuring unity of measurements;

2) exercises metrological control and supervision;

3) is conducted by the State register of measuring instruments, the State register of standard samples;

4) is created by information fund of regulating documents;

5) determines general metrological requirements to means, methods and results of measurements;

6) performs on a grant basis checks on observance by legal entities, individual entrepreneurs of requirements of regulating documents and in case of identification of their violations applies in relation to them adequate measures, stipulated by the legislation Turkmenistan;

7) submits for approval in the Cabinet of Ministers of Turkmenistan units of the sizes allowed to application in Turkmenistan;

8) approves the state standards of units of sizes, types of measuring instruments, types of standard samples;

9) establishes rules of creation, approval, storage and application of the state standards of units of sizes;

10) is established by procedure for development of technique of checking and accomplishment of measurements;

11) is established by procedure for carrying out checking, calibration and metrological certification of measuring instruments and standard samples;

12) performs calibration, checking and metrological certification of measuring instruments and standard samples;

13) performs accreditation (certification) of test laboratories (centers) in the field of ensuring unity of measurements;

14) is established by procedure for carrying out testing of measuring instruments, standard samples, and also approval procedure like measuring instruments, type of standard samples;

15) determines according to the legislation of Turkmenistan the rights and obligations of the officials exercising metrological control and supervision;

16) is determined by the list of legal entities, creation of metrological services in whom is obligatory, and also establishes procedure for creation and the organization of work of these metrological services;

17) interacts with customs, sanitary, veterinary, law-enforcement and other public authorities when implementing metrological control and supervision;

18) performs interregional and cross-industry coordination of activities in the field of ensuring unity of measurements in Turkmenistan;

19) is represented by Turkmenistan in the international organizations performing activities in the field of ensuring unity of measurements;

20) performs other functions referred to its competence by the legislation of Turkmenistan.

Article 8. Competence of other public authorities

Other public authorities within their competence:

1) participate in realization of single state policy in the field of ensuring unity of measurements;

2) is performed by other functions in the field of ensuring unity of measurements according to the legislation of Turkmenistan.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.