Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

ORDER OF THE MINISTRY OF ECONOMICS OF THE REPUBLIC OF MOLDOVA

of June 26, 2012 No. 111

About approval of the Regulations on National council on metrology

(as amended on 27-02-2015)

According to Item 5 of article 2 of the Law on metrology No. 647-XIII of 17.11.1995 with subsequent changes and amendments, and also for the purpose of harmonization of National system on metrology with the European and international practice of PRIKAZYVAYU:

1. Approve:

Regulations on National council on metrology (the appendix 1) which is order component.

Nominal structure of National council on metrology (appendix 2), being order component.

2. Assign to management of metrology of head department of infrastructure of quality representation obligation for publication on the web page of the Ministry of Economics and in the Official monitor of the Republic of Moldova of this order.

3. To impose control of execution of this order on the deputy minister Mr. Octavian Kalmyk.

Deputy. Prime Minister, Minister of Economic Affairs

Valeriu Lazer

Appendix 1

to the Order of the Ministry of Economics of the Republic of Moldova of June 26, 2012 No. 111

Regulations on National council on metrology

1. General principles

1.1. The national council on metrology (NSM) is the body created on public basis under the Central body for metrology (TsOM) of the Ministry of Economics from domestic specialists of profile who represent and consider offers on the policy relating to the field of metrology.

1.2. In the activities NSM is guided by the current legislation, international treaties and conventions in the field of metrology in which the Republic of Moldova is the signing party, and this Provision.

1.3. Recommendations of NSM are implemented by release of resolutions or orders TsOM.

1.4. Meetings of NSM are convened once a month, as necessary can be convened more often.

1.5. Recommendations (decision) of NSM are accepted by open voting and are reflected in protocols.

2. Tasks of national council on metrology

NSM has the following purposes:

2.1. consideration and submission of offers on policy in the field of metrology;

2.2.   No. 191 is excluded according to the Order of the Ministry of Economics of the Republic of Moldova of 17.11.2014

2.3. monitoring of efficiency of implementation of national policy in the field of metrology responsible persons according to the Law on metrology;

2.4. consideration of reports on implementation of national policy in the field of metrology upon the demand of the Government, Parliament.

3. Obligations of national council on metrology

NSM has the following obligations:

3.1. Considers and makes offers on change of regulatory framework in the field of metrology.

3.2. Considers and makes offers on harmonization of National system on metrology with the European and international practice.

3.3. Considers and makes offers on development of national base of standards according to requirements of national economy.

3.4. Considers and makes offers on:

- national strategy in metrology;

- strategy in preparation (training), advanced training of personnel in metrology;

- to priorities of cooperation with the regional and international metrological organizations;

- to national, regional and international projects of the Republic of Moldova in the field of metrology.

3.5. Represents offers on implementation of requirements of the European and international conventions in the field of metrology.

3.6. Considers drafts of programs and strategy for ensuring unity, legality and accuracy of measurements.

3.7. Considers the reports of scientific research in the field of metrology developed by National institute of metrology and represents offers.

3.8 Considers the reports developed by National institute of metrology on need of national economy for specific measurements.

3.9.   No. 191 is excluded according to the Order of the Ministry of Economics of the Republic of Moldova of 17.11.2014

3.10. Makes suggestions for improvement of mechanisms of promotion of national policy in the field of metrology.

3.11   No. 191 is excluded according to the Order of the Ministry of Economics of the Republic of Moldova of 17.11.2014

3.12.   No. 191 is excluded according to the Order of the Ministry of Economics of the Republic of Moldova of 17.11.2014

3.13. Considers protocols of metrological examinations on authorization of subjects which request accomplishment of activities in the field of legislative metrology, with submission of recommendations about this question.

3.14. Considers expert opinions and set of documents of the applicant for the purpose of issue of recommendations about confirmation or repeated confirmation as the expert - the metrologist or the verificator to National system on metrology.

3.15. Considers frequency of checking of measuring instruments with representation of TsOM of the corresponding recommendations.

3.16. Considers drafts of regulations in the field of metrology, and also statements on acceptance as national regulating documents of other countries in the field of metrology with which the Republic of Moldova signed bilateral or multilateral agreements, and represents offers of TsOM.

3.17. Considers and makes to the central body for metrology proposals on approval of the national and initial standards provided by National institute on metrology for the purpose of their approval.

4. Structure of national council on metrology

4.1. The national council on metrology consists of highly qualified specialists of area, experts in the field of metrology of National system in metrology, and also representatives of bodies of the central public management (according to appendix 2).

4.2. The nominal structure of NSM affirms TsOM.

4.3. In case of release of the member of NSM from post of its power in NSM will be carried out by again authorized persons appointed to these positions or other persons delegated by these organizations.

4.4. Members of NSM lose the right of membership in the following cases:

- according to the statement of the member of NSM;

- in case of response the organization which it represents;

- in case of absence at three consecutive meetings.

5. The rights of national council on metrology

5.1. NSM has the right:

- request the help of experts for consultations in the area;

- claim according to the assigned functions of the recommendation and offer, the concerning fields of metrology;

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.