Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

ORDER OF THE MINISTRY OF REGIONAL DEVELOPMENT AND CONSTRUCTION OF THE REPUBLIC OF MOLDOVA

of June 28, 2011 No. 40

About approval of the Regulations on general procedure on assessment of conformity of construction products

(as amended on 01-03-2016)

1. Approve Regulations on general procedure on assessment of conformity of construction products, according to appendix.

2. The regulations on general procedure on assessment of conformity of construction products become effective after publication in the Official monitor of the Republic of Moldova of the Order of the Government "About Change of Appendix to the Order of the Government No. 226 of February 29, 2008".

3. To provide to management of construction, construction materials and modern technologies the publication of this order in the Official monitor of the Republic of Moldova.

4. To impose control of execution of this order on Mr. Anatoly Zolotkov, the deputy minister.

Minister of Regional Development and Construction

Marchel Redukan

Appendix

to the Order of the Minister of Regional Development and Construction of the Republic of Moldova of June 28, 2011 No. 40

Regulations on general procedure on assessment of conformity of construction products

I. Scope

1. This Regulations on general procedure on assessment of conformity of construction products (further - the Provision) are developed for the period of prolongation of term of introduction in operation of the Section VI of the Technical regulation on construction products approved by the Order of the Government No. 226 of February 29, 2008. (Official monitor of the Republic of Moldova, 2008, Art. No. 51-54, 324).

2. The provision is applied to assessment of conformity of construction products, including to the imported products, in the regulated and independent area and is obligatory for conformity assessment bodies of products from area of construction.

II. Terms, determinations, reducings

3. Terms, determinations

In the present the Provision terms and determinations according to the Law of the Republic of Moldova No. 235 of December 1, 2011 about activities for accreditation and assessment of conformity (The official monitor of the Republic of Moldova, 2012, No. 46-47, of the Art. 136) and the Technical regulation on construction products approved by the Order of the Government No. 226 of 29.02.2008 are used (further - the Technical regulation on construction products).

4. Reducings

ND - regulating documents

OOS - conformity assessment body

NOOS - national authority on assessment of conformity

III. General provisions

5. Certification of products in the field of construction from the regulated area is carried out by OOS, accredited and acknowledged in accordance with the established procedure the Law of the Republic of Moldova No. 235 of December 1, 2011 about activities for accreditation and assessment of conformity and Rules of recognition of conformity assessment bodies, for activities in the regulated area, approved by the order of the deputy prime minister, Minister of Economy and Trade No. 10 of 30.01.2009. (Official monitor of the Republic of Moldova, 2009, No. 95, Article 389).

6. Assessment of conformity of construction products from independent area is performed by accredited OOS.

7. The construction products which are subject to assessment of conformity in the regulated area are provided in the Section III of the Technical regulation on construction products.

Certification of the imported construction products in the regulated area is carried out by the same rules of certification, as products of local production.

If the importer does not represent certificates of conformity or conformance statements, the imported products are exposed to assessment of conformity according to the procedures applied to similar products and this Provision.

8. In process to assessment of conformity of products in the regulated area products compliance national interconnected to the standards provided in the Section V of the Technical regulation on construction products according to area of accreditation of acknowledged OOS is estimated.

9. Within assessment of conformity of products of OOS shall check all requirements from the applicable regulating document chosen from the List of the interconnected standards approved by the central industry body of public management in the field of the construction published in the Official monitor of the Republic of Moldova.

The producer has the right to choose from the List of the interconnected standards one applicable regulating document depending on feature of its production.

10. In certification process of construction products in independent area products compliance to requirements of voluntary standards for the corresponding products for the request of the applicant is established.

IV. Area of accreditation and authorization of OOS

11. Areas of accreditation of OOS for the regulated area will be constituted proceeding from the applicable regulating documents included in the List of the interconnected standards developed by the central industry body of public management in the field of construction, published in the Official monitor of the Republic of Moldova.

12. Areas of accreditation of OOS affirm the director of the National center for accreditation of MOLDAC.

V. Assessment of conformity of construction products

13. In case of assessment of conformity of construction products in the regulated and independent area systems on the certifications stated in annex No. 2 to this Provision are used.

14. Systems on certification are installed depending on specifics of production process of products, testing, delivery and use of specific products and potential risks, required level of reasons.

The system on certification of products in the regulated area is determined by OOS by the proposal of the applicant.

The system on certification of products in the independent area chosen by the applicant is offered to OOS.

15. Laboratory tests and amount of testing:

a) if the company (applicant) has accredited test laboratory, then laboratory tests are carried out in this laboratory in the presence of the representative of OOS. If the test laboratory cannot test or is not accredited on other obligatory parameters, then testing are carried out in accredited and acknowledged test laboratories.

b) if the applicant has no test laboratory, then all obligatory testing are carried out in acknowledged accredited test laboratory and the company shall have the signed contract with the accredited or certified test laboratory for carrying out periodic tests.

16. OOS shall keep in archive within five years from the moment of expiration of certificates of conformity of the copy of certificates of conformity together with documents based on which the certificate was issued.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.