of January 19, 2002 No. 62
About approval of admissible parameters of the vehicles intended for movement on highways of the Republic of Kazakhstan
According to the Law of the Republic of Kazakhstan of July 4, 2003 "About road transport" the Government of the Republic of Kazakhstan DECIDES:
1. Approve enclosed:
1) it is excluded
2) it is excluded
3) admissible parameters of the vehicles intended for movement on highways of the Republic of Kazakhstan.
2. To the Ministry of Transport and Communications of the Republic of Kazakhstan and the Ministry of Internal Affairs of the Republic of Kazakhstan to take necessary measures for implementation of this resolution.
3. It is excluded
4. Recognize invalid some decisions of the Government of the Republic of Kazakhstan according to appendix.
5. This resolution becomes effective from the date of signing.
Prime Minister
Republic of Kazakhstan K. Tokayev
Approved by the order of the Government of the Republic of Kazakhstan of January 19, 2002 No. 62
1. Admissible dimensional parameters and other linear sizes of vehicles shall not exceed the stated below values (in meters):
1) admissible length:
грузового автомобиля прицепа двухосных автобусов автобусов, имеющих более чем две оси сочлененного автобуса сочлененного автотранспортного средства автопоезда | 12 12 13,5 15 18 24 24; |
2) admitted width:
всех автотранспортных средств изотермических кузовов автотранспортных средств | 2,55; 2,6; |
3) admissible height:
всех автотранспортных средств | 4,0.»; |
2. The admissible sizes of vehicles specified in Item 1 of this part include the sizes of demountable bodies and container for loads, including containers.
3. The vehicle in case of movement shall provide possibility of turn within the space limited to the external radius of 12,5 of meters and internal radius - meter 5,3.
4. The admissible distance between axis of lock of the coupling device and the rear of the combined vehicle shall not exceed 12 meters.
5. The admissible distance measured parallel to longitudinal axle of the road train from external front point of body or platform for installation of load behind cabin to back external point of trail car, less distance between the rear of the tractor and foremost part of trail car, shall not exceed 17 meters.
6. The admissible distance measured parallel to longitudinal axle of the road train from external front point of body or platform for installation of load behind cabin to back external point of semitrailer truck shall not exceed meter 16,4.
7. The load established in vehicle body shall not support back external point of the car or trail car more than on 2 meters.
8. The distance between rear axle of the cargo vehicle and front axle of trail car shall be at least 3 meters.
9. Horizontally measured distance between axis of hinged fastening of semitrailer truck and any point of foremost part of semitrailer truck shall not exceed meter 2,04.
10. In case of measurement of length of the vehicle the following devices mounted on the vehicle are not considered:
antipollution devices of glasses and mudguards;
frontal and side marking plates;
devices for sealing and defensors for them;
devices for fixing of tarpaulin and defensors for them;
equipment for electric lighting;
mirrors of back visibility and the device for the overview of space behind the car;
airwater tubes;
lengths of valves and connectors for connection with trail cars or demountable bodies;
steps for access to body, the elevator for reserve tire cover;
lift platforms, steps for access and other similar equipment which is not exceeding in on-position of 200 millimeters and executed so that it could not increase the extreme lot of loading of the car established by the manufacturer.
11. In case of measurement of height of the vehicle shall not be considered mounted on the vehicle:
antennas;
pantograph in the lifted provision.
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.
The document ceased to be valid since September 7, 2015 according to Item 1 of the Order of the Government of the Republic of Kazakhstan of August 10, 2015 No. 626