ORDER OF THE GOVERNMENT OF THE REPUBLIC OF KAZAKHSTAN

of June 15, 2010 No. 588

About approval of the technical regulation "Requirements to safety of the equipment for conversion of agricultural raw materials. Crop production products"

For the purpose of implementation of the Law of the Republic of Kazakhstan of November 9, 2004 "About technical regulation" the Government of the Republic of Kazakhstan DECIDES:

1. Approve the enclosed technical regulation "Requirements to safety of the equipment for conversion of agricultural raw materials. Crop production products"

2. This resolution becomes effective after twelve months from the date of the first official publication.

 

Approved by the order of the Government of the Republic of Kazakhstan of June 15, 2010, No. 588

Technical regulation "Requirements to safety of the equipment for conversion of agricultural raw materials. Crop production products"

1. Scope

1. This technical regulation "Requirements to safety of the equipment for conversion of agricultural raw materials. Crop production products" (further - the Technical regulation) extend to food machines and the equipment for conversion of agricultural raw materials - products of crop production and the machine textile (further - machines and the equipment) irrespective of country of source, released on the market of the Republic of Kazakhstan.

2. The list of machines and the equipment to which safety requirements of this Technical regulation extend and their codes according to the qualifier of the Commodity nomenclature of foreign economic activity of the Republic of Kazakhstan (further - the Commodity Nomenclature of Foreign Economic Activity of RK) are specified in appendix to this Technical regulation.

3. This Technical regulation installs requirements to safety of machines and the equipment, and also to processes of their lifecycle in relation to risks which are caused by the following dangerous factors:

1) mechanical dangers;

2) electric dangers;

3) fire danger;

4) potential of explosion;

5) noise;

6) vibration;

7) allocation of hazardous substances and materials;

8) radiations;

9) thermal dangers;

10) biological and microbiological dangers (virus and bacteriological);

11) the dangers arising in case of neglect the principles of ergonomics when designing machines and the equipment;

12) unexpected start-up, turns, scrollings (or any similar emergency conditions);

13) impossibility of stop of the machine and equipment in general or in necessary provision;

14) violations of speed of rotation of the tool;

15) power supply violations;

16) mistakes in management system;

17) mounting errors;

18) destructions in the course of work;

19) fall or emission of objects or liquids;

20) stability loss;

21) the sliding, capsizing or fall of people (caused by machine and the equipment);

22) shortcomings of instructions for service personnel.

4. Identification of machines and the equipment carry out for the purpose of confirmation of conformity of specific machines and the equipment them to the description provided by the applicant.

In case of identification can be used:

1) regulating documents on standardization according to which machines and the equipment are issued;

2) maintenance instructions;

3) shipping documentation (agreements and contracts of delivery).

5. Depending on specifics of machines and the equipment apply the following methods of identification:

1) documentary;

2) tool;

3) visual;

4) testing.

2. Terms and determinations

6. In this Technical regulation terms and determinations according to the Laws of the Republic of Kazakhstan "About technical regulation" and "About safety of machines and the equipment", and also the following terms with the corresponding determinations are used:

food machines and the equipment - the machines and the equipment provided for processing and conversion of raw materials and foodstuff.

the wrong application - the use of machines and the equipment which is not provided by the producer;

the working area - space height to m 2,2 over the level of floor or site on which there are places of permanent or temporary stay of operators (workplaces);

workplace - the place of permanent or temporary stay of the operator in the course of labor activity;

protective barrier - the part of the machine or equipment which is specially intended for ensuring protection in the form of physical barrier;

the protection device - the additional equipment (which is not protective barrier), reducing risk both in case of separate application, and together with protective barrier;

application to destination - use of the machine or equipment according to the assignment specified by the producer by this machine or the equipment and (or) in the maintenance instruction;

the motor field is space of workplace with the placed governing bodies and other technical means in which physical actions of the operator in operating time are performed;

the zone of reach of the motor field is the part of the motor field of workplace limited to the arches described by the most outstretched arms in case of their movement in shoulder joint;

permanent workplace - the place in which the operator is the most part (more than 50% or more than 2 hours continuously) the working hours. If at the same time work is carried out in different Items of the working area, all working area is considered permanent workplace.

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info