Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

The document ceased to be valid since  May 18, 2018 according to Item 2 of the Order of the Ministry of social policy of Ukraine of  February 14, 2018 No. 207

It is registered

Ministry of Justice of Ukraine 

April 19, 2010 

No. 293/17588

ORDER OF THE STATE COMMITTEE OF UKRAINE ON INDUSTRIAL SAFETY, LABOR PROTECTION AND MOUNTAIN SUPERVISION

of March 26, 2010 No. 65

About approval of Industrial safety rules during operation of electronic computers

According to the Law of Ukraine "About labor protection" PRIKAZYVAYU:

1. Approve Industrial safety rules during operation of electronic computers which are applied.

2. Declare invalid the order of Committee on supervision of labor protection of Ukraine of the Ministry of Labour and Social Policy of 10.02.99 No. 21 "About approval of Industrial safety rules during operation of electronic computers", registered in the Ministry of Justice of Ukraine 17.06.99 for No. 382/3675.

3. To provide to the head of department of the organization of the state supervision in the AIC and the welfare sphere of department of the state supervision Tkachyov V. S. within five days provision of this order on state registration in the Ministry of Justice of Ukraine.

4. To the head of department of normative and legal and legal providing Kalinovsky I. G. enter the order in the State register of regulatory legal acts on labor protection and place on the web page of Gosgorpromnadzor.

5. To the assistant department head of personnel, clerical work and special work Kravtsu V. Yu. provide publication of the order in mass media.

6. To impose control over the implementation of this order on the First Deputy Chairman of Gosgorpromnadzor Dengin A. P.

7. This order becomes effective from the date of its official publication.

 

Chairman of Gosgorpromnadzor
S. O. Storchak

Approved by the Order of the State committee of Ukraine on industrial safety, labor protection and mountain supervision of March 26, 2010 No. 65

Industrial safety rules during operation of electronic computers

I. Scope of application

1.1. Industrial safety rules during operation of electronic computers (further - Rules) extend to all subjects of housekeeping irrespective of patterns of ownership which in the activities carry out the work connected with electronic computers (further - EVM) with video display terminals (further - VDT), including on that which has the workplaces equipped with EVM with VDT and peripheral devices (further PU).

Rules establish safety requirements to the equipment of workplaces of operators of EVM with VDT and PU (further - operators) and to work using EVM with VDT and PU.

Requirements of Rules are obligatory for employers, operators of electronic computers, operators of computer set, operators of computer imposition and workers of other professions which in the work apply EVM with VDT and PU.

1.2. Requirements of Rules do not extend on:

working educational places of pupils, students in computer classes (offices) of the highest, professional, general education educational institutions;

workplaces of operators of EVM in the sphere of management and operation of nuclear power plants;

the workplaces of pilots, drivers or operators of vehicles equipped with EVM with VDT and PU, EVM in systems of data processing onboard intermedia, EVM as a part of machines and the equipment which move in the course of work;

workplaces of the workers who are engaged in servicing, repair and adjustment of EVM with VDT and PU;

portable systems of data processing if they are changeably used on workplace;

computing machines (calculators), cash desks (devices) and devices with small devices of indication yielded or results of measurement;

the typewriters of classical design equipped with VDT (display typewriters).

1.3. Workplaces shall meet the requirements of these rules and the State health regulations and regulations of work with visual display terminals of the electronic computers approved by the resolution of the Chief state health officer of Ukraine of 10.12.98 No. 7 (DSANPIN 3.3.2-007-98) (further - DSANPIN 3.3.2-007-98).

1.4. Training and examination concerning labor protection at the company are performed according to requirements of the Standard regulations on procedure for carrying out the training and examination concerning labor protection approved by Gosnadzorokhrantrud's order of Ukraine of 26.01.2005 No. 15, registered in the Ministry of Justice of Ukraine 15.02.2005 for No. 231/10511 (NPAOP 0.00-4.12-05).

1.5. Training and examination concerning fire safety at the company are performed according to requirements of the Standard regulations on instructing, special training and examination concerning fire safety at the companies, in organizations and the organizations of Ukraine, the Ministry of Ukraine approved by the order concerning emergency situations and for protection of the population against consequences of the Chernobyl catastrophic crash of 29.09.2003 No. 368, registered in the Ministry of Justice of Ukraine 11.12.2003 for No. 1148/8469 (NAPB B.02.005-2003).

1.6. It is not necessary to allow to work of persons who in accordance with the established procedure did not undergo training, instructing and examination in labor protection, fire safety and these rules.

1.7. At the company where EVM with VDT and PU is operated, the security service of work according to the Standard regulations on security service of work approved by Gosnadzorokhrantrud's order of Ukraine of 15.11.2004 No. 255, registered in the Ministry of Justice of Ukraine 01.12.2004 for No. 1526/10125 is created (NPAOP 0.00-4.21-04).

1.8. At the company where EVM with VDT and PU is operated, the instruction for labor protection according to the Regulations on development of instructions for labor protection approved by Gosnadzorokhrantrud's order of 29.01.98 No. 9, registered in the Ministry of Justice of Ukraine 07.04.98 for No. 226/2666 is developed (NPAOP 0.00-4.15-98).

II. Terms and determinations

In these rules terms are used in such value:

the video display terminal (VDT) - the part of EVM containing the device for visual display of information;

the electronic computer (EC) the electronic computer with optional additional devices, system elements (devices for seal, scanners, modems, blocks of continuous power and other special peripheral devices);

the operator of EVM with VDT and PU - the worker using screen devices during the work;

the peripheral devices (PD) - set of optional additional devices which are used in the course of activities of the operator of EVM (the keyboard, the mouse manipulator, disk system, sound system, the modem, the microphone, the printer, the scanner and so forth);

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.