Approved by the Order of Committee on the state control of emergency situations and industrial safety of the Ministry on emergency situations of the Republic of Kazakhstan of August 20, 2008 No. 33
1. These methodical instructions determine recommended amount of technical inspections and testing of lifting installations at the companies under control to Committee on the state control of emergency situations and industrial safety of the Ministry of Emergency Situations of the Republic of Kazakhstan (further - Committee).
2.1. Trunk and poppet
2. In case of technical inspection it is checked:
1) availability and maintaining passport of trunk, compliance to the project (passport) of armirovka and communications of trunk;
2) general condition of armirovka of trunk: fixture durability, corrosion depreciation and lack of deformation of executions; reliability of fixture of pipelines, cables and their connecting couplings, alarm and suspended ropes;
3) condition and fixture of conductors (guides) and boots (couplings), for driving rises - condition of the otboyny ropes or other devices interfering collision of tubs;
4) condition of mid-flight ladders and platforms copra, their barrier and lighting, condition of regiments, ladders and barriers of tradable departments of trunks.
2.2. The loading, discharging, landing and protecting gears
3. The condition of nodes, operability and reliability of action is checked.
4. Unloading curve (tippers), loading devices (dosers), mechanisms of exchange of loads (trolleys), the shaking platforms, landing fists, stoppers and barriers.
5. Operability of safety okolostvolny lattices in ruddvor of the mine, additional barriers and the clearness of work of doors of guillotine type.
6. For driving trunks - reliability of protective umbrellas over tubs, operability of work of folding platforms, condition of regiments and tension frames, availability and operability of devices of blocking of lag of the directing frame.
7. Check of gaps between brake ropes and captures of lovitel.
2.3. Lifting vessels, suspended (trailing) and parachute devices
8. General condition of lifting vessels (cages, skips, skipoklety, tubs or trolleys).
9. At cages of vertical rises - reliability of stoppers, ease of opening of roof (manhole), operability of doors, the protecting devices, availability and operability of the devices interfering removal of doors in the closed condition.
10. Condition and operability of action of elements of suspended (trailing) devices and compliance of terms of their service to requirements of Section 8.5.10 of "Rules of industrial safety in case of conducting works as underground method".
11. At the lifting vessels applied to descent - raising of people:
1) condition of double independent suspension bracket (for one-rope rises);
2) reliability of fixture at least in two points of the suspended device (head and lower equilibratings of ropes) to vessels and counterbalance (for multirope rises);
3) condition of double hitches between cars, operability of center core, hitches and safety chains (for inclined rises);
4) operability and reliability of adaptation interfering spontaneous opening of pharynx of hook (uncoupling) in case of movement of tub, size of depreciation of eye of handle and total depreciation of eye of handle and axis (for driving rises);
5) compliance of the actual loading, admissible according to the passport of the trailing (suspended) device.
12. Condition of parachutes or lovitel:
1) condition, correctness of installation and reliability of fixture of shock-absorbers and depreciation ropes, seal availability on the body of barrier of depreciation devices and condition of control units of broach of depreciation ropes;
2) compliance of service life of parachutes to requirements of Section 8.5.7 of "Rules of industrial safety in case of conducting works as underground method".
2.4. Koprovye, guides and the rejecting pulleys
13. Condition of elements of pulleys: obodyev, spokes, flanges, trenches (streams).
14. Condition of bolt, welded and rivet connections of pulleys.
15. Reliability of landing of pulley on shaft and condition of shponochny connection.
16. Condition of lubricant and reliability of tightening of bolts of fixture of bearings.
17. Condition of working part:
1) for futerovanny pulleys - condition and size of depreciation of lining, operability and tightening of bolts of fixture of lining;
2) for the pulleys which are not providing lining - the size of depreciation of trench with measurement of section of flute and sketch of the most worn-out place.
18. Height of flanges over the upper part of rope and the size of depreciation of flange.
2.5. Ropes
19. Compliance of ropes on all working length to requirements of Sections 8.5.6.1; 8.5.6.4 "Rules of industrial safety in case of conducting works as underground method".
20. Loss of section of ropes from corrosion and mechanical depreciation (for the neozinced ropes with diameter more than 25 mm) according to Section 8.5.6.3 of "Rules of industrial safety in case of conducting works as underground method".
21. Correctness and reliability of zapantsirovka.
22. Condition of elements of koush.
23. Uniformity of tension of ropes in multirope machines.
24. Reliability of fixture of the ends of ropes on drums; condition and tightening of zhimk.
25. Reliability of fixture of the conduction and counterbalancing ropes.
26. Condition and correctness of fixture of brake ropes in the tension station of sump, condition of devices of the alarm system about wrest of brake ropes.
2.6. Radical part
27. Condition of the feedwell and reliability of its fixture to lobovina.
28. Condition lobovin, rivet and welding seams and bolt connections of demountable drums.
29. Condition and height of flanges of drums over the upper part of rope.
30. Condition and reliability of fixture of lining, condition of flutes and lack of friction of rounds of rope the friend about the friend in case of navivka:
1) at one-rope pulleys of friction - the size of depreciation and residual height of segments of lining;
2) at kanatovedushchy pulleys of multirope machines reliability of tightening and latching of bolts of fixture of futerovochny whetstones, depreciation of lining under each rope, need of pro-point of lining;
3) at machines with bitsilindrokonichesky drum - condition of trenches on conic part and their fixture, condition of welded seams and lack of cracks of trenches.
31. Fixture of the jammed drum (the jammed part or pulley on shaft.
32. Ease of rotation on shaft and lack of axial movement of perestavny drum (perestavny part).
33. Condition of plugs (inserts, rolikoopor) and their lubricant.
34. Condition of nodes and elements of the mechanism of shift of drums: gear, worm or frictional connections, lever system and hinged connections; drive, control units and blocking.
35. Quality of lubricant, lack of leakages of air and clearness of operation of the mechanism of shift.
36. Operability and reliability of lock devices (forkopf).
37. Condition, fixture, temperature of heating and lubricant of bearings of radical shaft.
2.7. Brake mechanisms
38. Executive body of brake:
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.