Document from CIS Legislation database © 2003-2023 SojuzPravoInform LLC

The document ceased to be valid since December 20, 2017 according to the Order of the Government of the Republic of Moldova of December 18, 2017 No. 1088

ORDER OF THE GOVERNMENT OF THE REPUBLIC OF MOLDOVA

of June 24, 2008 No. 765

O of the Main state inspectorate for technical supervision of hazardous production facilities

(as amended on 05-11-2014)

1. Approve:

Regulations on the Main state inspectorate for technical supervision of hazardous production facilities according to appendix No. 2.

Structure of the Main state inspectorate for technical supervision of hazardous production facilities according to appendix No. 3.

2. Establish the extreme number of the Main state inspectorate for technical supervision of hazardous production facilities in number of 55 units (except for personnel on servicing of the building) with the annual salary fund according to the current legislation.

3. Declare since July 31, 2008 invalid the Order of the Government No. 586 of June 16, 2005. "About approval of the Provision, structure and extreme number of Service of standardization and metrology" (The official monitor of the Republic of Moldova, 2005, Art. No. 86-88, 648).

4. For 2008 to perform the expenses connected with the organization and ensuring activities of the Main state inspectorate for technical supervision of hazardous production facilities within the assignments approved for it in the government budget and the means of central office of Service of standardization and metrology released as a result of its liquidation, and also the special means which are saved up on the account of the office of Service of standardization and metrology and redistributed according to need.

5. To impose control over the implementation of this resolution on the Ministry of Economics.

Prime Minister

Zinaida Grechany

Countersign:

first Deputy Prime Minister, Minister of Economic Affairs

 

Igor Dodon

Minister of Finance

Mariana Durleshtyanu

Appendix No. 1

to the Order of the Government of the Republic of Moldova of June 24, 2008 No. 765

It is excluded according to the Order of the Government RM of 17.08.2012 No. 620

Appendix No. 2

to the Order of the Government of the Republic of Moldova of June 24, 2008 No. 765

Regulations on the Main state inspectorate for technical supervision of hazardous production facilities

Chapter I. General provisions

1. The main state inspectorate for technical supervision of hazardous production facilities (further - Inspection) is administrative authority in subordination of the Ministry of Economics, equipped with special functions of control and the state technical supervision of hazardous production facilities.

2. In the activities Inspection is guided by the Constitution and the laws of the Republic of Moldova, resolutions of Parliament, presidential decrees of the Republic of Moldova, ordinances, resolutions and orders of the Government and Ministry of Economics, regulations and normative and technical documents, international agreements and conventions which party the Republic of Moldova is, and also this Provision.

3. The state technical supervision is exercised by the state inspectors who in case of accomplishment of the obligations wear the uniform according to the Provision approved by the Government made at the expense of the allocated financial funds.

4. Costs for ensuring activities of Inspection are performed at the expense of the means provided in the government budget.

Chapter II. Tasks, main functions, obligations and rights of Inspection

5. The mission of inspectorate consists in implementation of state policy in the field of industrial safety, accomplishment of provisions of the existing regulations and regulating documents in the field of industrial safety, international agreements in the field of industrial safety which part is the Republic of Moldova, the organization and accomplishment, within the allocated competences, control and supervision of observance legislative and regulations about accomplishment of activities and/or works in the field.

6. Inspection performs the following main functions and the main tasks:

a) exercises the state control and technical supervision for the purpose of check of safety conditions of hazardous production facilities on which activities are performed and/or works, including in transit, storage and use of explosives, conversion and enrichment of mineral raw materials, and also extent of observance of requirements of regulations and normative and technical documents are conducted;

b) correctness of implementation of technical research of the reasons of the accidents and incidents which took place on hazardous production facilities including theft of explosives, and also sufficiency of the measures taken according to results of these researches participates and/or checks;

c) gives to the economic agent of the order about elimination of the revealed violations regarding requirements of industrial safety;

d) instructs within the powers, concerning industrial safety, including in need of expertize of industrial safety, technical diagnostics (including nondestructive control) the technical installations and engineering procedures applied on this object;

e) issues to the economic agent of the instruction about suspension of works, the requirements of industrial safety fulfilled in the conditions of non-compliance, and the sealing of the equipment or installations applied on hazardous production facility including rooms if their further application can lead to accident, or in case of danger to life and health of workers and/or the population;

f) registers the project documentation on installation and construction works, adjustment, operation, technical diagnostics, expansion, reconstruction, technical retrofitting, preservation and liquidation of hazardous production facilities;

g) participates in the commissions on certification of personnel in the field of industrial safety, acceptance and commissioning of hazardous production facilities. Acceptance is understood as complex of the technical and organizational measures provided for commissioning of hazardous production facility including primary testing of object;

h) issues one-time technical permissions to hazardous production facilities for works on adjusting, applied on specific object, and considers reports on accomplishment of adjustment works;

i) issues one-time technical permissions to hazardous production facilities for the commissioning of the equipment and installations applied on specific object after performance of works on their installation, adjustment, expansion, reconstruction, technical retrofitting and preservation;

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.