of January 6, 2025 No. 1
About approval of the professional standard "Production of Jewelry and Similar Products"
According to Item 5 of article 5 of the Law of the Republic of Kazakhstan "About professional qualifications" and the Rules of development and (or) updating of professional standards approved by the order of the Minister of Labour and Social Protection of the population of the Republic of Kazakhstan of September 7, 2023 No. 377 (registered in the Register of state registration of regulatory legal acts for No. 33401) I ORDER:
1. Approve the enclosed professional standard "Production of Jewelry and Similar Products" according to appendix to this order.
2. To provide to committee of the industry of the Industry ministry and construction of the Republic of Kazakhstan in the procedure established by the legislation:
1) within five calendar days after signing of this order the direction it in the Kazakh and Russian languages in the Republican state company on the right of economic maintaining "Institute of the legislation and legal information of the Republic of Kazakhstan" the Ministries of Justice of the Republic of Kazakhstan for official publication and inclusion in Reference control bank of regulatory legal acts of the Republic of Kazakhstan;
2) placement of this order on Internet resource of the Industry ministry and construction of the Republic of Kazakhstan.
3. To impose control of execution of this order on the supervising vice-Minister of Industry and construction of the Republic of Kazakhstan.
4. This order becomes effective after ten calendar days after day of its first official publication.
Minister
K. Sharlapayev
Appendix
to the Order of the Minister of Industry and construction of the Republic of Kazakhstan of January 6, 2025 No. 1
1. Scope of the professional standard: the professional standard "Production of Jewelry and Similar Products" (further - the professional standard) is developed according to Item 5 of article 5 of the Law of the Republic of Kazakhstan "About professional qualifications" for the purpose of personnel training at the companies, recognitions of professional qualification of workers and graduates of the organizations of education and solutions of wide range of tasks in the field of personnel management in the organizations and at the companies and is applied in the sphere of production of jewelry.
2. In this professional standard the following terms and determinations are applied:
1) informalny education – the education type received during daily activities out of the organizations of education and the organizations providing educational services, and not accompanied with issue of the document confirming results of training;
2) knowledge – the studied and acquired information necessary for accomplishment of actions within professional task;
3) skill – capability to apply knowledge and abilities, allowing to carry out professional task entirely;
4) profession – the occupation performed by physical person and requiring certain qualification for its accomplishment.
3. In this professional standard the following reducings are applied:
1) KS – the job evaluation catalog;
2) ETKS – single wage rate book;
3) the ORK – industry frame of qualifications;
4) NRK – national frame of qualifications;
5) OKED – the general qualifier of types of economic activity.
4. Name of the professional standard: Production of jewelry and similar products.
5. Code of the professional standard: C32120063.
6. Instruction of section, the Section, group, class and subclass agrees OKED:
C Processing industry
32 Production of other finished products
32.1 Production of jewelry, costume jewelry and similar products
32.12 Production of jewelry and similar products
32.12.0 Production of jewelry and similar products
7. Short description of the professional standard: Line and exclusive production of jewelry and similar products from precious materials, their repair and art restoration.
8. List of cards of professions:
1) the Production engineer - the 6th ORK level;
2) the Jeweller - the 2nd ORK level;
3) the Jeweller - the 3rd ORK level;
4) the Incrustator - the 3rd ORK level;
5) Pozolotchik of art products (jewelry) – the 2nd ORK level;
6) Pozolotchik of art products (jewelry) - the 3rd ORK level;
7) the Acceptor of precious metals and raw materials - the 3rd ORK level;
8) The controller of art products (jewelry) - the 2nd ORK level;
9) the Controller of art products (jewelry) - the 3rd ORK level;
10) the Fitter of products from precious metals - the 3rd ORK level;
11) the Setup man in production of precious metals - the 3rd ORK level;
12) the Founder of art products - the 3rd ORK level;
13) the Incrustator - the 2nd ORK level;
14) the Acceptor of precious metals and raw materials - the 2nd ORK level;
15) the Fitter of products from precious metals - the 2nd ORK level;
16) the Setup man in production of precious metals - the 2nd ORK level;
17) the Founder of art products - the 2nd ORK level.
1. Profession card "Production engineer": | |||
Group code: |
2141-1 | ||
Code of the name of occupation: |
2141-1-005 | ||
Name of profession: |
Production engineer | ||
Skill level on ORK: |
6 | ||
qualification subtotal on ORK: |
|||
Skill level on ETKC, KC and other standard qualification characteristics: |
The job evaluation catalog of positions of heads, specialists and other employees the Order of the Minister of Labour and Social Protection of the population of the Republic of Kazakhstan of December 30, 2020 No. 553 "About approval of the Job evaluation catalog of positions of heads, specialists and other employees". No. 22003 is registered in the Ministry of Justice of the Republic of Kazakhstan on December 31, 2020. Production engineer (Technologist) | ||
Level of professional education: |
Education level: the higher education (bachelor degree) |
Specialty: The production and processing industries |
Qualification: - |
Requirements to work experience: |
the production engineer of the I category - length of service as the production engineer of the II category at least 2 years; the production engineer of the II category - length of service as the production engineer without category at least 3 years; the production engineer without category - length of service as the category equipment I at least 3 years. | ||
Connection with informal and informalny education: |
|||
Other possible names of profession: |
|||
Main objective of activities: |
Organization and control of production process of production of jewelry, including works of art of art. | ||
Description of labor functions | |||
List of labor functions: |
Obligatory labor functions: |
1. Ensuring implementation at the company of the new equipment and technology 2. Management of development and deployment of engineering procedures and modes of production | |
Additional labor functions: |
|||
Labor function 1: Ensuring implementation at the company of the new equipment and technology |
Skill 1: Control of implementation at the company of the new equipment and technology |
Abilities: | |
1. Perform management of the organization, the layout of new shops and sites, their specializations. 2. Perform management of development of the new equipment, new high-productive engineering procedures. 3. Organize development and deployment of progressive, economically reasonable engineering procedures and the modes of production, to determine actions for improvement of product quality and increase in labor productivity. | |||
Knowledge: 1. Modern jewelry industry, world jewelry tendencies, main jewelry brands 2. Differences of industrial and personal jewelry production 3. Structures of the jewelry market, jewelry company 4. All sites of jewelry production 5. Properties of materials (including nonconventional), precious and semiprecious stones, metals, alloys and methods of their processing 6. Features of work with the equipment of jewelry workshop 7. Features of operation of the three-dimensional scanner 8. Bases of engineering procedures of other types of the equipment (foundry, forming, etc.) | |||
Possibility of recognition of skill: |
it is not recommended | ||
Labor function 2: Management of development and deployment of engineering procedures and modes of production |
Skill 1: Control over technological and design developments at the company |
Abilities: 1. Control processes of hardware and the organization of workplaces. 2. Calculate production capacities and loading of the equipment, to estimate compliance of technological capabilities and design decisions. 3. Study the best practices in area of the production technology. 4. Develop and plan the actions for increase in production efficiency directed to reducing the material consumption, decrease in labor input, work performance improvement. | |
Knowledge: 1. Production technologies of products of the company, prospect of technical development of the company. 2. Bases of the economy. 3. Production organizations. 4. Bases of the labor law; rules and regulations of labor protection. 5. Control of sale on assortment, quantity and quality. 6. Features of organizational and technological structure of the company. 7. The organizations of technological preparation of production in industry and at the company. 8. Experience of leading enterprises in the field of the progressive production technology of similar products. | |||
Possibility of recognition of skill: |
it is not recommended |
Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info
Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system
If you cannot find the required document, or you do not know where to begin, go to Help section.
In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.
You also may open the section Frequently asked questions. This section provides answers to questions set by users.