Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

RESOLUTION OF THE CABINET OF MINISTERS OF THE AZERBAIJAN REPUBLIC

of December 1, 2003 No. 153

About approval of the Description, specification and sample of visa form

(as amended on 05-05-2014)

For the purpose of approval of the description, the specification and sample of visa form, the Cabinet of Ministers of the Azerbaijan Republic decides:

1. Approve "The description of the form of the visa" (appendix No. 1).

2. Approve "The specification of the form of the visa" (appendix No. 2).

2-1. Approve "Sample of visa form" (Appendix No. 3).

3. Charge to the Ministry of Finance of the Azerbaijan Republic to provide acceptance in stipulated by the legislation procedure for adequate measures to start production of the form of the visa according to its description and the specification.

4. This resolution becomes effective from the date of signing.

Prime Minister of the Azerbaijan Republic

A. Rasi-Zade

Appendix No. 1

Approved by the Resolution of the Cabinet of Ministers of the Azerbaijan Republic of December 1, 2003 No. 153

Description of the form of the visa

The description of the form of the visa on departure from the country and entry into the country issued to foreign citizens by embassies, consulates and other diplomatic representations of the Azerbaijan Republic in foreign countries is printed according to the machine-readable format of the visa (MRV-A) provided by part two of the document No. 9303 ICAO (International Civil Aviation Organization).

In the visa the following data are specified:

- the name of the Azerbaijan Republic in the Azerbaijani and English languages, in also word "VIZA", the series consisting of two Latin letters and seven-digit number of the form of the visa;

name, surname, passport number, floor, birth date, nationality and total quantity of departures;

name, surname, passport number, floor, birth date, nationality and total quantity of the people traveling with the holder of the visa;

- the place of issue of visa, start and end date of action of the visa, visa type, entrance number, category and the purpose, number of the days permitted for stay in the country, date of issue of the visa;

- the authorized signature, issued the visa, and seal of the relevant state body;

- the front description of the holder of the visa according to requirements of biometric identification.

In the lower part of the form of the visa the machine-readable zone (MRZ) which provides submission of the data included in the visa in machine-readable form is located.

Note: Names of the parameters provided in the visa register in the Azerbaijani and English languages. When filling the visa the specified data are entered in English.

Appendix No. 2

Approved by the Resolution of the Cabinet of Ministers of the Azerbaijan Republic of December 1, 2003 No. 153

Specification of the form of the visa

The specification of the form of the visa, corresponds to the machine-readable format of the visa (MRV-A) provided by part two of the document No. 9303 ICAO (International Civil Aviation Organization).

The form of the visa has the sizes of 80x120 mm, back part sticky consists of one page in horizontal type with corners of semicircular form and back.

The form of the visa which paper consists of 100% of cellulose is printed by offset method, multi-color intaglio and metalschedules. Paper of the form of the visa, the used paint and glue shall be steady against the corresponding temperature degrees when printing on the laser printer.

On the form of the visa there are symbols of the Azerbaijan Republic in visible and invisible form, in the central part - the State Emblem of the Azerbaijan Republic in the increased form. Machine-readable part of the form of the visa two-way.

Surface of the form of the visa smooth. As a part of paper of the form of the visa there are visible and flyuoretsentny fibers the Paper used for production of the form of the visa optically does not pass ultraviolet rays. In production the guilloche background, methods of microseal and relief seal are used.

Part of the form of the visa which belongs to personal data is printed by method of "iridescent seal". In writing of the word "VIZA" ink with optically the changing characteristics is used. Series and numbers on the form of the visa are printed by magnetic ink. Number of elements on the form of the visa is represented by infrared optical ink, protective elements are located on the form of the visa in pro rata type.

On the form of the visa there is the small size hologram or kinegramma with print of the State Emblem of the Azerbaijan Republic.

The paper, paint and glue used for the form of the visa shall keep quality and characteristics at least ten years.

On the form of the visa there are several cuts which in case of attempt to unstick it from the passport, lead to visa raspadaniye on several parts.

Appendix No. 3

Approved by the Resolution of the Cabinet of Ministers of the Azerbaijan Republic of December 1, 2003 No. 153

Sample of visa form

* It is not brought

 

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.