RESOLUTION OF THE CABINET OF MINISTERS OF THE KYRGYZ REPUBLIC

of January 21, 2023 No. 32

About approval of the Regulations on procedure for carrying out the state metrological supervision

For the purpose of regulation of the procedures connected with metrological supervision on execution of requirements of regulatory legal acts in the sphere of ensuring unity of measurements in the Kyrgyz Republic according to article 15 of the Law of the Kyrgyz Republic "About ensuring unity of measurements", articles 13, of the 17th constitutional Law of the Kyrgyz Republic "About the Cabinet of Ministers of the Kyrgyz Republic" the Cabinet of Ministers of the Kyrgyz Republic decides:

1. Approve Regulations on procedure for carrying out the state metrological supervision according to appendix.

2. Recognize invalid:

1) the order of the Government of the Kyrgyz Republic "About approval of the Regulations on procedure for carrying out the state metrological supervision" of May 31, 2012 No. 350;

2) Item of 31 appendices to the order of the Government of the Kyrgyz Republic "About modification and amendments in some decisions of the Government of the Kyrgyz Republic" of July 1, 2013 No. 395;

3) Items 1 and 2 of the order of the Government of the Kyrgyz Republic "About modification and amendments in some decisions of the Government of the Kyrgyz Republic" of March 25, 2015 No. 153;

4) the order of the Government of the Kyrgyz Republic "About modification of the order of the Government of the Kyrgyz Republic "About approval of the Regulations on procedure for carrying out the state metrological supervision" of May 31, 2012 No. 350" of May 16, 2017 No. 286.

3. This resolution becomes effective after fifteen days from the date of official publication.

Appendix

to the Resolution of the Cabinet of Ministers of the Kyrgyz Republic of January 21, 2023 No. 32

Regulations on procedure for carrying out the state metrological supervision

1. General provisions

1. In this Provision the following concepts are used:

1) the state metrological supervision - the activities performed by state body of the executive authority, specially authorized Cabinet of Ministers of the Kyrgyz Republic for implementation of check of observance of mandatory requirements of regulatory legal acts in the field of ensuring unity of measurements;

2) measurement - set of the transactions on use of the technical tool storing unit of physical quantity providing finding of ratio (in obvious or implicit type) the measured size with its unit and receipt of value of this size;

3) gage - the technical tool intended for measurements, having the normalized metrological characteristics;

4) alienation of goods are transactions in case of which goods pass from property of one subject (seller) into property of other subject (buyer). At the same time goods quantity is determined as a result of the procedure of measurements, and the price and cost are fixed;

5) packaged goods in packagings (further - ready packagings) - goods in packagings which pack up pack and seal in the absence of the consumer, at the same time content of packaging cannot be changed without its opening and deformation, and the weight, amount, length, the area or other sizes specifying quantity of the goods containing in packaging are designated on packaging.

2. The provision establishes procedure for carrying out the state metrological supervision (further - GMN) behind observance of requirements of regulatory legal acts in the field of ensuring unity of measurements, metrological rules and regulations in the sphere of the state regulation determined by the Law of the Kyrgyz Republic "About ensuring unity of measurements", authorized state body by metrological supervision (further - authorized body).

3. Basic principles of GMN:

1) presumption of conscientiousness of the checked business entities, that is the business entity is not recognized violated mandatory requirements and other conditions if other is not established;

2) openness and availability to business entities of the acts establishing mandatory requirements and conditions which observance is checked when carrying out GMN;

3) continuity and efficiency of carrying out GMN, that is its complete most bystry implementation during fixed term.

4. In authorized body:

- GMN is performed by structural division on metrological supervision (the head and specialists) (further - structural division on metrological supervision);

- GMN can be conducted independently by structural division on metrological supervision or together with other control supervisory authorities;

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info