Document from CIS Legislation database © 2003-2022 SojuzPravoInform LLC

The document ceased to be valid since  November 21, 2015 according to Item 1 of the Order of the CEO of the Uzbek agency of standardization, metrology and certification of November 3, 2015 No. 591 "About recognition voided the Order "About Approval of Rules of Accreditation of Certification Bodies of Products, Test (Measuring) Laboratories (Centers), Control Facilities in the field of Certification, Metrological Services and the Expert-auditors in Quality", and also changes and amendments to it"

Registered by the

Ministry of Justice

Republic of Uzbekistan

On July 17, 2006 No. 1596

ORDER OF THE UZBEK AGENCY OF STANDARDIZATION, METROLOGY AND CERTIFICATION

of May 10, 2006 No. 157

About approval of Rules of accreditation of certification bodies of products, test (measuring) laboratories (centers), control facilities in the field of certification, metrological services and the expert-auditors in quality

(as amended on 03-03-2015)

According to the laws of the Republic of Uzbekistan "About certification of products and services", "About metrology" and the Regulations on the Uzbek agency of standardization, metrology and certification approved by the resolution of the Cabinet of Ministers of the Republic of Uzbekistan of 05.08.2004 N373 "About Enhancement of Structure and Organization of Activities of the Uzbek Agency of Standardization, Metrology and Certification" I order:

1. Approve Rules of accreditation of certification bodies of products, test (measuring) laboratories (centers), control facilities of certification, metrological services and the expert-auditors in quality according to appendix.

2. From the date of entry into force of this order to consider the State standard of the Republic of Uzbekistan OzDSt l6.1 "CA RUZ. Procedure for carrying out accreditation of certification bodies and control facilities" invalid.

3. Enact this Order after ten days from the date of its state registration in the Ministry of Justice of the Republic of Uzbekistan.

CEO of the Uzbek agency of standardization, metrology and certification

R. Buriyev

Approved by the Order of the Uzstandart Agency of May 10, 2006 No. 157

Rules of accreditation of certification bodies of products, test (measuring) laboratories (centers), control facilities of certification, metrological services and expert-auditors in quality

These rules according to the laws of the Republic of Uzbekistan "About certification of products and services", "About metrology", "About assessment of conformity" and the Regulations on the Uzbek agency of standardization, metrology and certification approved by the resolution of the Cabinet of Ministers of the Republic of Uzbekistan of August 5, 2004 No. 373, establish procedure for carrying out accreditation of certification bodies of products, test (measuring) laboratories (centers), control facilities in the field of certification, metrological services and the expert-auditors in quality and metrological services, the expert-auditors in quality of the Republic of Uzbekistan and the foreign countries performing assessment works and to confirmation of conformity of products, services, personnel and quality systems, testing of products extend to certification bodies of uniform products, test (measuring) laboratories (centers), control facilities in the field of certification, metrological works and services in the territory of the Republic of Uzbekistan.

I. General provisions

1. In these rules the following main terms and concepts are used:

Accreditation - official recognition of competences for accomplishment of specific objectives by assessment and confirmation of conformity of products and services, personnel and quality systems, and also metrological works and services to the established requirements.

Accrediting body - the state body issuing official powers for implementation of activities for assessment and confirmation of conformity of products and services, personnel and quality systems, and also metrological works and services to the established requirements (Uzstandart agency).

The appeal - the written address of the applicant for review of any negative decision relating to its expected status.

The applicant - the physical and (or) legal entities applying for accreditation.

Test (measuring) laboratory (center) - accredited test (measuring) laboratory which performs testing of specific products or specific type of testing (further - "laboratory").

Inspection check-up - the procedure of repeated assessment of activities of certification bodies of products and laboratories for the purpose of confirmation of their compliance to the requirements established in case of accreditation.

Accreditation criterions - set of requirements to which the applicant shall satisfy.

National accreditation system - the system which is operating at the national level, having own rules of procedure and managements for carrying out accreditation.

Object of accreditation - certification body of products, laboratory, control facility in the field of certification, metrological service and the expert-auditor in quality.

Certification body of products the accredited body which is carrying out services in confirmation of conformity of products and services, quality systems to the established requirements.

Control facility in the field of certification - the body accredited in accordance with the established procedure performing assessment of the certified products and quality management systems at the request of certification bodies (further - "control facility").

The area of accreditation - specific works in certain sphere of activity on confirmation of conformity for which accomplishment the application is submitted and (or) is provided accreditation.

The certificate on accreditation - the official document certifying powers of accredited objects of accreditation to perform activities for certification and carrying out testing for the purposes of certification, and also metrological works and services.

Council on accreditation - the governing body of the National accreditation system making the decision by results of the carried-out accreditation (further - "Council").

The technical expert - person designated by accrediting body for ensuring special knowledge or examination concerning the estimated area of accreditation.

The expert-auditor in quality is the specialist accredited in the procedure established by the legislation, having the corresponding qualification for work in the field of certification, accreditation and control.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.