ORDER OF THE MINISTRY OF INDUSTRY AND TRADE OF THE RUSSIAN FEDERATION

of May 21, 2021 No. 1865

About approval of procedure for product labeling which compliance is confirmed according to the procedure, the stipulated in Article 46 Federal Laws of December 27, 2002 to No. 184-FZ "About technical regulation"

According to Item 3 of article 46 of the Federal Law of December 27, 2002 No. 184-FZ "About technical regulation" (The Russian Federation Code, 2002, No. 52, Art. 5140; 2020, No. 52, the Art. 8606) and the paragraph the fifth Item 1 of the Regulations on the Ministry of Industry and Trade of the Russian Federation approved by the order of the Government of the Russian Federation of June 5, 2008 No. 438 "About the Ministry of Industry and Trade of the Russian Federation" (The Russian Federation Code, 2008, No. 24, Art. 2868; 2019, to No. 28, of the Art. 3791), I order:

1. Approve the enclosed procedure for product labeling which compliance is confirmed according to the procedure, the stipulated in Article 46 Federal Laws of December 27, 2002 to No. 184-FZ "About technical regulation".

2. To impose control of execution of this order on the deputy minister of the industry and trade of the Russian Federation A. A. Uchenov.

3. This order becomes effective since March 1, 2022 and is effective within 6 years.

Approved by the Order of the Ministry of Industry and Trade of the Russian Federation of May 21, 2021, No. 1865

Procedure for product labeling which compliance is confirmed according to the procedure, the stipulated in Article 46 Federal Laws of December 27, 2002 to No. 184-FZ "About technical regulation"

I. General provisions

1. This Procedure establishes rules of product labeling, the products included in the single list which are subject to obligatory certification and in the single list of products which are subject to declaring of compliance which compliance is confirmed according to the procedure of obligatory confirmation of conformity, No. 184-FZ approved by the Government of the Russian Federation and the stipulated in Article 46 Federal Laws of December 27, 2002 "About technical regulation" (The Russian Federation Code, 2002, to No. 52, with Art. 5140; 2020, No. 52, the Art. 8606), market access mark (further respectively - address Sign, products).

2. In case of product labeling the address Sign according to article 27 of the Federal Law of December 27, 2002 No. 184-FZ "About technical regulation" which image and the description is approved by the order of the Government of the Russian Federation of November 19, 2003 No. 696 "About market access mark" (The Russian Federation Code, 2003, No. 47, the Art. 4547) is used.

3. According to Item 2 of article 27 of the Federal Law of December 27, 2002 No. 184-FZ "About technical regulation" marking by the Sign of the address is performed by the manufacturer of products or the applicant specified in article 2 of the Federal Law of December 27, 2002 to No. 184-FZ "About technical regulation" (further - the manufacturer of products or the applicant), independently any by method, convenient for it, before production in the address.

4. Products which compliance is not confirmed according to the procedure, the stipulated in Article 46 Federal Laws of December 27, 2002 to No. 184-FZ "About technical regulation" (further - obligatory confirmation of conformity) are not marked by address Sign.

II. Product labeling by address Sign

5. The sign of the address is applied on fixed part of each unit of production and (or) its packaging (in the presence) and (or) it is specified in the accompanying documentation (technical documentation) (in the presence). In the accompanying documentation (technical documentation) the Sign of the address is put on free field, in the place where data on obligatory confirmation of conformity of products are provided.

6. The place of drawing the Sign of the address on products, packaging and the accompanying documentation (technical documentation) is determined by the manufacturer of products or the applicant.

7. In case of impossibility of drawing the Sign of the address directly on products it is applied on the label (label) or the tape fixed on products.

8. In case of impossibility of drawing the Sign of the address directly on packaging it is applied on the insert attached to individual or group consumer packaging.

9. The manufacturer of products or the applicant based on the document on confirmation of conformity of products (the certificate of conformity or the declaration of conformity) performs product labeling by address Sign.

10. Marking by the Sign of the address is performed by technological methods which shall provide:

invariance of consumer properties of products;

accurate image of the Sign of the address;

firmness of the image of the Sign of the appeal to the external influencing factors;

keeping of the image of the Sign of the address during fixed term of service or expiration date of products.

11. Execution of the Sign of the address shall be one-color and contrast with color of surface on which it is applied. The sign of the address can be flat, relief or holographic.

12. The used size of sign of the address shall not create difficulties in case of its identification by consumers and have width at least 5 mm.

13. If products are marked in addition to address Sign by marks of conformity, including marks of conformity of systems of voluntary certification of products, such marking shall not worsen visibility, clearness and readability of the Sign of the address.

14. In case of marking the product circulation Sign which compliance is not confirmed according to Item of 1 this Procedure, provides the administrative responsibility according to the procedure, established by the legislation of the Russian Federation on administrative offenses.

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info