Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

RESOLUTION OF THE MINISTRY OF EMERGENCY SITUATIONS OF THE REPUBLIC OF BELARUS

of May 17, 2021 No. 34

About approval of Rules on ensuring industrial safety in case of well-drilling

Based on part two of article 20 of the Law of the Republic of Belarus of January 5, 2016 No. 354-Z "About industrial safety" and subitem 7.4 of Item 7 of the Regulations on the Ministry of Emergency Situations of the Republic of Belarus approved by the Presidential decree of the Republic of Belarus of December 29, 2006 No. 756, the Ministry of Emergency Situations of the Republic of Belarus DECIDES:

1. Approve Rules on ensuring industrial safety in case of well-drilling (are applied).

2. Declare invalid the resolution of the Ministry of Emergency Situations of the Republic of Belarus of February 9, 2018 No. 3 "About approval of Rules on ensuring industrial safety in case of well-drilling".

3. This resolution becomes effective since November 1, 2021. 

Minister

V. I. Sinyavsky

It is approved

Ministry of Natural Resources and Environmental Protection of the Republic of Belarus

 

Ministry of Agriculture and Food of the Republic of Belarus

 

Ministry of Architecture of the Republic of Belarus

 

Ministry of Housing and Public Utilities of the Republic of Belarus

 

The Belarusian state concern on oil and chemistry

 

 

Approved by the Resolution of the Ministry of Emergency Situations of the Republic of Belarus of May 17, 2021 No. 34

Rules on ensuring industrial safety in case of well-drilling

Section I. Basic provisions

Chapter 1. General requirements

1. These rules are obligatory for subjects of industrial safety which perform well-drilling, held for use geothermal resources of subsoil, downloading in underground spaces (horizons) of hydrocarbons and production wastes, and also wells of 20 meters in depth and more which drilling is performed by search and investigation of mineral deposits, except for well-drillings on oil and gas.

2. For the purposes of these rules terms and their determinations in the values determined by the Code of the Republic of Belarus about subsoil, the Law of the Republic of Belarus of January 5, 2016 No. 354-Z "About industrial safety" and also the following terms and their determinations are applied:

drilling - process of artificial education in array of excavation of the round section (borehole) by destruction of rocks by means of drilling equipment with removal of products of destruction;

the drilling rig - complex of drilling equipment and the constructions intended for well-drilling;

drilling equipment - the technical device necessary for accomplishment of its main and (or) additional functions used independently or established on the drilling rig;

the geological and technical job specification - the operating plan of work of boring crew on this well determining technology of process of drilling.

3. The subjects of industrial safety performing well-drilling shall get permission (certificate) of Department on supervision of safe operation in the industry of the Ministry of Emergency Situations provided by subitem 20.1.12 of Item 20.1 of the single list of the ministerial procedures performed by state bodies and other organizations concerning legal entities and individual entrepreneurs, the Council of Ministers of the Republic of Belarus approved by the resolution of February 17, 2012 No. 156.

4. Commissioning of self-propelled and portable drilling rigs is performed with execution of the act of commissioning of the drilling rig by the commission of the subject of the industrial safety appointed by the order of the head of the subject of industrial safety. The entry procedure in operation of self-propelled and portable drilling rigs is performed with frequency at least once in 12 months.

5. Preparation and examination of workers of the subject of industrial safety is carried out according to the Instruction about procedure for preparation and examination concerning the industrial safety approved by the resolution of the Ministry of Emergency Situations of the Republic of Belarus of July 6, 2016 No. 31.

6. Management of activities of boring crew is performed by the drilling foreman.

7. Before the beginning and after completion of works the drilling rig is subject to obligatory survey by the operator of the drilling rig with entry of results of survey in the boring magazine according to appendix 1 (further - the boring magazine).

8. Presence of strangers when implementing drilling operations is not allowed.

9. Implementation of hoisting transactions in case of well-drilling in case of incomplete structure of crew (watch) is not allowed.

10. At the subject of industrial safety, proceeding from features of production, the list of the works with the increased danger performed according to the work permit on performance of works with the increased danger, the special organizational and technical events, and also constant control requiring implementation behind their implementation is constituted.

The list of the works with the increased danger performed according to the work permit affirms the head of the subject of industrial safety.

Chapter 2. Requirements to drilling equipment

11. Drilling equipment shall meet the requirements of the technical regulation of the Customs union "About safety of machines and the equipment" (TR CU 010/2011) accepted by the decision of the Commission of the Customs union of October 18, 2011 No. 823, and the technical regulation of the Customs union "About safety of the low-voltage equipment" (TR CU 004/2011) accepted by the decision of the Commission of the Customs union of August 16, 2011 No. 768, and also to requirements of operational documentation of the manufacturer of drilling equipment, these rules.

12. Modification of design of drilling equipment, is allowed only in coordination with the organization developer and the manufacturer.

13. On drilling rigs by the organizations manufacturers special places for placement of the first-aid kit of first aid, thermos with drinking water and emergency firefighting equipment shall be provided.

14. Nodes, details, devices and elements of drilling equipment which can be source of danger to workers and also the surfaces of protective and protection devices shall be painted in alarm colors.

15. On mechanical parts of drilling equipment, mechanisms, equipments, installations (electroinstallations) with the electric drive which can appear energized shall be structurally provided elements for connection of drilling equipment to protective grounding. Over these elements the Grounding symbol shall be put.

16. Fasteners and elements of connection of drilling equipment, installations, mechanisms, equipments shall be protected from breaking-out, spontaneous in operating time, and detachments.

17. The design of drilling equipment shall exclude spontaneous turning on of mechanisms under the influence of concussion or vibration.

18. The measuring instruments applied on the drilling rig shall undergo the state checking according to the legislation on ensuring unity of measurements.

Installation of measuring instruments shall provide clear visibility of indications.

The manometer shall be chosen with such scale that the upper limit of measurement of working pressure was in the second third of scale. On scale of the manometer the red line specifying the maximum working pressure shall be caused. Instead of red line it is allowed to attach the metal plate painted in red color and skintight to manometer glass to the manometer case.

Chapter 3. Operation of drilling equipment

19. Drilling rigs shall be completed with operational documentation.

20. The drilling rigs which fulfilled the appointed resource can be allowed to work only after the conclusion of the commission appointed by the head of the subject of industrial safety with indication of renewal term of its operation.

In case of assessment of technical condition of further use of the drilling rig, depending on type and appointment, the corresponding control methods (testing) - mechanical, electric, hydraulic, nondestructive and others shall be applied.

Assessment of technical condition shall be carried out according to the instructions and techniques developed by the subject of industrial safety.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.