Document from CIS Legislation database © 2003-2020 SojuzPravoInform LLC

ORDER OF THE GOVERNMENT OF THE KYRGYZ REPUBLIC

of September 2, 2019 No. 446

About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements"

According to articles 10 and 17   of the constitutional Law of the Kyrgyz Republic "About the Government of the Kyrgyz Republic" and the Law of the Kyrgyz Republic "About ensuring unity of measurements" the Government of the Kyrgyz Republic decides:

1. Approve:

Regulations on procedure for carrying out checking of measuring instruments in the Kyrgyz Republic according to appendix 1;

Regulations on procedure for production, application and storage of verification marks according to appendix 2;

The list of the measuring instruments which are subject to checking and frequency of checking of measuring instruments according to appendix 3.

2. Recognize invalid:

the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664;

-  the order of the Government of the Kyrgyz Republic "About modification and amendments in  the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664" of December 5, 2013 No. 658;

-  the order of the Government of the Kyrgyz Republic "About modification of  the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664" of March 2, 2015 No. 89;

-  the order of the Government of the Kyrgyz Republic "About entering of amendment and change into  the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664" of December 7, 2015 No. 839;

-  the order of the Government of the Kyrgyz Republic "About introduction of amendments and changes in  the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664" of February 9, 2017 No. 85;

-  the order of the Government of the Kyrgyz Republic "About modification of  the order of the Government of the Kyrgyz Republic "About measures for implementation of the Law of the Kyrgyz Republic "About ensuring unity of measurements" of September 27, 2012 No. 664" of March 12, 2018 No. 128.

3. This resolution becomes effective after ten days from the date of official publication.

Prime Minister of the Kyrgyz Republic

M. Abylgaziyev

Appendix 1

to the Order of the Government of the Kyrgyz Republic of September 2, 2019 No. 446

Regulations on procedure for carrying out checking of measuring instruments in the Kyrgyz Republic

This Regulations on procedure for carrying out checking of means of changes are developed in pursuance of the Law of the Kyrgyz Republic "About ensuring unity of measurements" and establish general requirements on the organization and carrying out checking of the measuring instruments falling within the scope of state regulation in case of their release in the address, after repair, import on import, operation and sale.

Checking of the measuring instruments made in the territory of EEU concerning which mutual recognition of approval like these measuring instruments according to the rules of recognition of results of works on ensuring unity of measurements approved by the Eurasian economic commission is made is carried out according to the procedure, approved by the Eurasian economic commission.

1. Terms and determinations

1. Checking of measuring instrument - establishment of suitability of measuring instrument to application based on experimentally determined metrological characteristics and confirmation of their compliance to the mandatory requirements established by technical regulations or specified in accompanying documents of manufacturing plant.

2. Primary checking of measuring instrument - the checking which is carried out in case of release of measuring instrument from production or after repair and also when importing measuring instrument on import in lots and sale.

3. Periodic checking of measuring instrument - the checking of the measuring instrument which is in operation or stored, carried out through the established intertesting intervals of time.

2. General provisions

4. The measuring instruments applied in the sphere of state regulation are subject to primary, periodic checkings which perform national authority on metrology, and also the legal entities authorized by state body on ensuring unity of measurements according to this Provision.

5. Checking is carried out by specially trained specialists certified as verificators in accordance with the established procedure according to the legislation of the Kyrgyz Republic in the sphere of ensuring unity of measurements.

6. The measuring instruments included in the List of the measuring instruments which are subject to checking, and frequency of checking of measuring instruments, approved in accordance with the established procedure are subject to checking.

7. Measuring instruments of the approved types in case of release into the stream of commerce are subject to primary checking and after repair, and also when importing on import.

8. The measuring instruments which are in operation through the established intertesting intervals of time according to the List of the measuring instruments which are subject to checking, and frequency of checking of measuring instruments, approved in accordance with the established procedure are subject to periodic checking.

9. The national authority on metrology shall record results of periodic checkings and develop recommendations about adjustment of intertesting intervals taking into account specifics of their application.

10. Measuring instruments which are used only in the educational purposes are not subject to checking, designation "U" shall be applied on them. The corresponding designation is specified in their operational documents.

11. In case of need ensuring metrological traceability and accuracy, the measuring instruments applied in the sphere of state regulation are calibrated.

3. Organization and procedure for carrying out checking

12. Checking of measuring instruments can be made:

1) in stationary and portable testing laboratories;

2) directly in the territory of the user of measuring instruments by sending of verificators on the company;

3) on control and testing Items of the companies making and repairing measuring instruments.

13. In cases if the design and the sizes of the calibrated measuring instrument do not allow to perform transportation, checking is made on the location of measuring instrument.

14. Periodic checking of measuring instruments is made in the calendar terms established by the approved schedule of checking which in duplicate is submitted in national authority on metrology or the legal entity authorized by state body on ensuring unity of measurements on the right of carrying out checking of measuring instruments, from October 1 to November 15 the current year.

Adjustment of the schedule of checking is made as agreed by the parties, taking into account observance of intertesting interval.

15. Measuring instruments shall be represented in actual fact prepared according to regulating and technical documentation, together with operational documents and technique of checking (if necessary), the certificate on the last checking, and also the necessary completing devices.

16. Time of stay of measuring instruments in stationary testing laboratories, on condition of their representation according to the schedule of checking, shall not exceed 10 working days, except for measuring instruments which duration of checking exceeds this term.

17. When carrying out checking of measuring instrument:

1) procedures according to the existing regulating documents about checking methods are carried out;

2) identification of measuring instrument (type, the range, serial number, etc.), environmental conditions in the course of measurements, indications of standards and the calibrated measuring instrument are entered in the protocol of the established form or developed by testing laboratory. The copy of the protocol is issued to the applicant on demand;

3) results of checking of measuring instrument are drawn up according to Items 21 or 25 of this provision.

18. When carrying out checking of measuring instruments on places of their production, repair or operation of the company shall:

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 40000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.