Document from CIS Legislation database © 2003-2021 SojuzPravoInform LLC

RESOLUTION OF THE CABINET OF MINISTERS OF UKRAINE

of April 26, 2003 No. 623

About approval of the Procedure for assignment and drawing on disks for laser systems of reading and/or matrix of special identification code

(as amended on 18-08-2021)

The Cabinet of Ministers of Ukraine decides:

1. Approve the Procedure for assignment and drawing on disks for laser systems of reading and/or matrix of special identification code it (is applied).

2. Recognize to invalid:

the resolution of the Cabinet of Ministers of Ukraine of April 28, 2001 No. 411 "About procedure for assignment of special identification code for optical disks for laser systems of reading" (The Official Bulletin of Ukraine, 2001, No. 18, the Art. 789);

the resolution of the Cabinet of Ministers of Ukraine of May 17, 2002 No. 673 "About introduction of amendments to the resolution of the Cabinet of Ministers of Ukraine of April 28, 2001 No. 411" (The Official Bulletin of Ukraine, 2002, No. 21, the Art. 1041).

Prime Minister of Ukraine

V. Yanukovych

Approved by the Resolution of the Cabinet of Ministers of Ukraine of April 26, 2003, No. 623

Procedure for assignment and drawing on disks for laser systems of reading and/or matrix of special identification code

1. This Procedure installs the mechanism of assignment and drawing on drives for laser systems of reading (further - disks) and/or matrixes of special identification code (further - SID-code).

2. Production of disks and/or matrixes is performed only after assignment to the producer of disks and/or matrixes of SID-code.

The SID-code intends for determination (identification) of the producer of disks and/or matrixes and the disks and/or matrixes made by it.

The SID-code of the producer of disks and/or matrixes in Ukraine is appropriated to Ministry of Economics.

The appropriated SID-code is put with the producer of disks and/or matrixes during their production in Ukraine with observance of the technical specifications of SID-code (further - technical specifications) determined in appendix 1. On each made disk with data recording the SID-code of the press form and SID-code of matrix which provide identification according to the producer of disks and matrixes is put down. On each made disk without data recording the SI code of the press form which provides identification of the producer of disks is put down. On each made matrix the matrix SID-code which provides identification of her producer is put down.

The SID-code applied on disk and/or matrix with violation of technical specifications is not considered put.

Paragraphs the fifth - the seventh Item 2 are excluded according to the Resolution of the Cabinet of Ministers of Ukraine of 28.11.2012 No. 1083

3. For assignment of SID-code the producer of disks and/or matrixes submits to Ministry of Economics the application in form according to appendix 2.

Are enclosed to the application:

documentary confirmed data on own or leased production equipment with indication of its name and the number of lines;

documentary confirmed data on own or leased production and storage facilities;

the power of attorney which is drawn up in accordance with the established procedure if the application is submitted by the authorized representative.

Consideration of the application and decision making about assignment of SID-code is performed by Ministry of Economics within ten working days from receipt date of the statement.

The decision on assignment of SID-code is sent by mail to the address specified in the statement or issued personally to the applicant.

4. The SID-code appropriated to the producer of disks and/or matrixes is entered in the register of SID-codes (further - the register) which is kept by Ministry of Economics.

5. Date of assignment of SID-code is decision date.

The Ministry of Economics within 10 days after assignment gives to the producer of disks of SID-code the relevant information to the Ministry of Internal Affairs and GFS.

6. The SID-code appropriated to one producer of disks and/or matrixes cannot be appropriated to another.

The bases for recognition of SID-code invalid are:

the message from the producer of disks and/or matrixes on cessation of production of disks and/or matrixes;

the notification from the producer of disks and/or matrixes on state registration of the termination of the legal entity (state registration of the termination of business activity of physical person entrepreneur).

The Ministry of Economics within three working days from receipt date of the notification makes the decision on recognition of SID-code invalid which goes to the producer of disks and/or matrixes no later than the next working day from the date of its acceptance.

Record about date and number of the decision on recognition of SID-code is entered by invalid in the register no later than the next working day from the date of its acceptance.

The Ministry of Economics no later than the next working day after decision making about recognition of SID-code notifies by invalid on this Ministry of Internal Affairs and GFS.

The producer of disks and/or matrixes shall report to Ministry of Economics about all changes of the data specified in the statement for assignment of SID-code and/or in the documents enclosed to the application within ten working days from the date of emergence of such changes with submission of verified copies of the documents confirming their origin in writing.

7. Are entered in the register:

data on the SID-code appropriated to the producer of disks and/or matrixes;

date of assignment of SID-code;

information about the producer of disks and/or matrixes;

Date and number of the decision on recognition invalid SID-code.

8. No. 1083 is excluded according to the Resolution of the Cabinet of Ministers of Ukraine of 28.11.2012

9. At the request of Ministry of Economics legal entities and physical persons provides free of charge information on the SID-codes appropriated to producers of disks and/or matrixes.

10. No. 1083 is excluded according to the Resolution of the Cabinet of Ministers of Ukraine of 28.11.2012

Appendix 1

to the Procedure

Technical specifications of SID-code which is appropriated to the producer of disks and/or matrixes in Ukraine

Compression mold SID-code

1. Each SID-code of compression mold consists of four capital letters of IFPI after which it is noted four - or five-digit code.

The last two figures of SID-code are appropriated by producer which shall provide drawing SID-code on each compression mold which is available for it, including on reserve compression molds. The first two or three signs (depending on case) are appropriated to Ministry of Economics of intellectual property and are the unique identifier of the producer of disks and/or matrixes.

Warning!!!

This is not a full text of document! Document shown in Demo mode!

If you have active License, please Login, or get License for Full Access.

With Full access you can get: full text of document, original text of document in Russian, attachments (if exist) and see History and Statistics of your work.

Get License for Full Access Now

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info

Effectively work with search system

Database include more 50000 documents. You can find needed documents using search system. For effective work you can mix any on documents parameters: country, documents type, date range, teams or tags.
More about search system

Get help

If you cannot find the required document, or you do not know where to begin, go to Help section.

In this section, we’ve tried to describe in detail the features and capabilities of the system, as well as the most effective techniques for working with the database.

You also may open the section Frequently asked questions. This section provides answers to questions set by users.

Search engine created by SojuzPravoInform LLC. UI/UX design by Intelliants.