RESOLUTION OF THE CABINET OF MINISTERS OF UKRAINE

of February 27, 2019 No. 157

About approval of the Technical regulation concerning requirements to ecodesign for electric motors

According to article 5 of the Law of Ukraine "About technical regulations and assessment of conformity" the Cabinet of Ministers of Ukraine decides:

1. Approve the Technical regulation concerning requirements to ecodesign for electric motors which is applied.

2. To provide to the state agency on energy efficiency and energy saving implementation of the Technical regulation approved by this resolution.

3. Bring in the list of types of products by which bodies of the state market supervision exercise the state market supervision approved by the resolution of the Cabinet of Ministers of Ukraine of December 28, 2016 No. 1069 (The Official Bulletin of Ukraine, 2017, No. 50, the Art. 1550), change which is applied.

4. This resolution becomes effective in six months from the date of its publication.

Approved by the Resolution of the Cabinet of Ministers of Ukraine of February 27, 2019 , No. 157

The technical regulation concerning requirements to ecodesign for electric motors

General part

1. This Technical regulation establishes requirements to ecodesign concerning issuance and operation of the electric motors including which are built in in other products.

This Technical regulation No. 640/2009 of July 22, 2009 about accomplishment of the Directive 2005/32/EU of the European Parliament and Council concerning requirements to ecodesign is developed for electric motors on the basis of Regulations of the Commission (EU).

2. In this Technical regulation terms are used in such value:

1) the asynchronous electric motor with short-circuited rotor - the electric motor without the sliding contacts of the switch of the direction of current, tokosobirayushchy rings or the power supply of direct current;

2) the brake electric motor - the electric motor equipped with braking mechanism which works directly with electric motor shaft;

3) the electric motor - the electric single-speed three-phase 50-hertz asynchronous electric motor with short-circuited rotor:

which has from two to six poles;

with a rated voltage of UN up to 1 kV;

rated output power of PN from 0,75 of kW to 375 kW;

which is estimated on long operating modes;

4) pole - total quantity of magnetic northern and South Poles which are formed during rotation of magnetic field of the engine. The quantity of poles determines the rated speed of the engine;

5) the speed regulator - the power electronic converter which will continuously transform the electric power which moves on the electric motor to regulate mechanical capacity of the electric motor according to the characteristics of loading connected with the rotary moment (it is set in motion by the engine), adapting work of three-phase 50-hertz electrical power unit for the variable frequency and tension which moves on the engine;

6) long operating mode - electric motor capability with the integrated cooling system to work with rated power trouble-free in the conditions of temperatures which do not exceed nominal top temperature;

7) phase - type of configuration of electric utility service of the power supply network.

Other terms are used in the value given in the Laws of Ukraine "About technical regulations and assessment of conformity", "About the state market supervision and control of non-food products", "About standardization" and the Technical regulation concerning installation of system for determination of requirements to ecodesign of energy-requiring products approved by the resolution of the Cabinet of Ministers of Ukraine of October 3, 2018 No. 804 (The Official Bulletin of Ukraine, 2018, No. 80, the Art. 2678).

3. Action of this Technical regulation does not extend on:

1) electric motors which are designed for work on condition of complete immersion in liquid;

2) electric motors which equip products, in particular, the distributing device, the pump, the fan or the compressor which energy efficiency cannot be measured separately from energy efficiency of this product;

3) the electric motors designed especially for work:

at height which exceeds 4 thousand meters above sea level;

in places where ambient air temperature exceeds 60 °C;

in case maximum operating temperature exceeds 400 °C;

in places where ambient temperature is below -30 °C for any electric motor or 0 °C in electric motors with liquid cooling system;

in product, chilling liquid temperature on entrance to which is below 0th °C or exceeds + 32 °C;

in potentially explosive environment according to the resolution of the Cabinet of Ministers of Ukraine of December 28, 2016 No. 1055 "About approval of the Technical regulation of the equipment and protective systems, held for use in potentially explosive environments" (The Official Bulletin of Ukraine, 2017, No. 8, the Art. 236);

4) brake electric motors (except requirements to technical documentation which are provided in subitems 3 - the 6 and 12 Item 2 appendices 1).

Requirements to ecodesign

4. Requirements to ecodesign for electric motors are established in appendix 1.

5. In two years from the date of entry into force of this Technical regulation all electric motors with rated power from 0,75 of kW to 375 kW who are specified in appendix 1, shall have nominal efficiency not lower than the IE3 level or to correspond to the IE2 level of the electric motors equipped with the speed regulator.

6. Requirements to information on product are determined in Item 2 of appendix 1 and shall be applied not later, than in two years from the date of entry into force of this Technical regulation.

7. Compliance to requirements to ecodesign is determined by means of methods of the measurements and calculations determined in appendix 2.

Assessment of conformity

Disclaimer! This text was translated by AI translator and is not a valid juridical document. No warranty. No claim. More info